modway EEI-2529 User manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 12
Thank you for purchasing the MODWAY BOOKCASE !
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the desk, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 60 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
EEI-2529 BOOKCASE
A
Ø 6 x 35 mm
x24
Fx 4
B
Ø 15 mm
x24 Cx 32 D
Ø 8 x 30 mm
x 20 E
Ø 6 x 30 mm
x 1
K
L 4
x 8
Gx 2 Hx 8 Ix 16 J
M 7 x 50 mm
x 8
Lx 4 Mx 1
M 3.5 x 15.5 mm
Ø 15 mm(Long)
Screwdriver (Not Include)
Hardware :
70 x 62 x 17 mm
Ø 8 x 19 mm
100 x 15 x 1.5 mm
Ø 15 mm(Short)

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 12
5Centre Board x4
1Top Board x1 2Bottom Board x1
6Fixed Shelf 1 x1
3Leg x4
7Fixed Shelf 2 x1
4Side Board x2
8Back Board 1 x1
9Back Board 2 x4
Components:
1
5
9
9
6
8
5
5
4
4
7
59
9
2
3
3
3
3
EEI-2529 BOOKCASE

Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 12
Ax8 Cx8 Dx20 Hardware required. Screwdriver not included
STEP 1:
STEP 2:
Ax10 Mx1 Hardware required. Screwdriver not included
1
2
CA
D
D
4
9
8
EEI-2529 BOOKCASE
Mx1

Customer Service 908-368-1025︱www.modwayfurniture.com Page 4 of 12
STEP 3:
STEP 4:
Hardware required. Screwdriver not included
Cx16 Hardware & Tool required
EEI-2529 BOOKCASE
Ax4 Cx8
CA
C
6
7
C
5
Mx1

Customer Service 908-368-1025︱www.modwayfurniture.com Page 5 of 12
STEP 5:
STEP 6:
Bx4 Hardware required. Screwdriver not included
55
8
B
6
EEI-2529 BOOKCASE
Mx1