modway EEI-3508 User manual

EEI-3508/3509 CHAIR
Customer Service 908-368-1025︱www.modway.com
Page 1 of 2
Thank you for purchasing the MODWAY Chair!
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the Chair, we recommend that it is assembled by two adults, on a carpeted
or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of children.
Hardware:
Components:
Bolt M6x35mmx12
Flat Washer M6 x12
1. Chair Body x1 2. Leg x4
A.
C.
Allen Wrench x1
D.
Spring Washer M6 x12
B.

EEI-3508/3509 CHAIR
Customer Service 908-368-1025︱www.modway.com
Page 2 of 2
STEP 1:
1. Take the Legs(2) package from the back of Chair body (1).
2. Position 1 piece of Leg (2) at one of the corners of the Chair body (1).
3. Insert 3 pieces of Bolts (A), 3 pieces of Spring Washers (B) and 3 pieces of Flat Washers (C) into the
corner to connect the leg (2). Use Allen Wrench (D) to tighten the Bolts (A) clockwise as shown.
4. Repeat the same steps for the remaining 3 pieces of Legs (2).
STEP 2 :
Carefully turn over the Chair.
Assembly is complete. Your Chair is ready to enjoy now!