modway EEI-2801 User manual

EEI–2801/2802 ARMCHAIR
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 1 of 3
Thank you for purchasing the MODWAY ARMCHIAR!
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2. Owing to the size and weight of the armchair, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of small children.
Hardware:
A Long Bolt 1/4”x35mm x 8
B Flat Washer 1/4” x 8
C
Allen Wrench 1/4” x 1
Component:
1
Chair Back x1
2Chair Seat
x1 3Left Arm x1
4Right Arm x1
1
4
3
2

EEI–2801/2802 ARMCHAIR
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 2of 4
STEP 1:
Please put Chair Back (1) on a carpeted or padded area.
Place Left Arm (3) to Chair Back (1) as shown.
Insert 1 piece of Bolt (A) with 1 piece of Flat Washer (B) into the holes on Chair Back (1) through the holes on Left Arm (3).
Use Allen Wrench (C) to tighten Bolts (A). Do not fully tighten Bolts (A) at this step.
STEP 2:
Hardware & Tool required
Place Right Arm (4) to Chair Back (1) as shown.
Insert 1 piece of Bolt (A) with 1 piece of Flat Washer (B) into the holes on Chair Back (1) through the holes on Right Arm (4).
Use Allen Wrench (C) to tighten Bolts (A). Do not fully tighten Bolts (A) at this step.
Hardware & Tool required
Ax1
Bx1
Cx1
Ax1
Bx1
Cx1
C
A
B
1
3
3
1
4
C
A
B

EEI–2801/2802 ARMCHAIR
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 3of 4
STEP 3:
Insert Chair Seat (2) to the assembled Chair Back (1),Left Arm (3) and Right Arm (4) as shown.
STEP 4:
Insert 6 pieces of Bolt (A) with 6 pieces of Flat Washer (B) into the holes on Left Arm (3) and Right Arm (4) through the holes on
Chair Back (1) and Chair Seat (2).
Use Allen Wrench (C) to tighten Bolts (A). Do not fully tighten Bolts (A) at this step.
Hardware & Tool required
3
4
1
2
C
A
B
1
3 4
2
Ax6
Bx6
Cx1

EEI–2801/2802 ARMCHAIR
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 4of 4
STEP 5:
Please carefully turn over the assembled chair.
Put a heavy object or seat one adult on top of the Chair Seat (2) to pressure the chair for leveling.
Use Allen Wrench (C) to tighten all Bolts (A) clockwise until secure.
1
4
3
2
C
Assembly is complete. Your armchair is ready to be used now!
If you want a seat cushion for the armchair, you can purchase it from our store.
Hardware & Tool required
Cx1