modway EEI-2988 User manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 6
EEI–2988 ARMLESS CHAIR & OTTOMAN
Thank you for purchasing the MODWAY CHAIR AND OTTOMAN！
Before you start, here are some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 45 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all fitting out of reach of children.
Hardware:
A
D Allen Wrench M5 x1
Component:
1 Chair Body x1 3 Chair Back Leg x2
Short Bolt M8x60mm x8
1
4
5
2
B Long Bolt M8x70mm x8
C Flat Washer M8 x16
2 Chair Front Leg x2
3
5
5
4 Ottoman Body x1 5 Ottoman Leg x4

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 6
EEI–2988 ARMLESS CHAIR & OTTOMAN
STEP 1:
Put Chair Body (1) and Ottoman Body (4) upside down on a carpeted or padded surface.
Open Velcro on bottom of Chair Body (1), Ottoman Body (4) and find the package of Front Legs (2), Back Legs (3),
Ottoman Legs (5) and Hardware as shown.
Hardware & Tools required
Ax2 Bx2 Cx4 Dx1
Package of Chair Front Legs, Chair Back Legs,
Ottoman Legs and Hardware
1
Velcro
B
D
STEP 2:
Make the position for assembling Chair Front Legs (2) and Chair Back Legs (3) fully visible.
Place 2 pieces of Chair Front Leg (2) to the front position of Chair Body (1) as shown.
Insert 2 pieces of Short Bolt (A) with 2 pieces of Flat Washer (C) into the bottom pre-drilled holes on Chair Front Legs (2)
through the bottom pre-drilled on the front of Chair Body (1).
Insert 2 pieces of Long Bolt (B) with 2 pieces of Flat Washer (C) into the top pre-drilled holes on Chair Front Legs (2)
through the top pre-drilled on the front of Chair Body (1).
Use Allen Wrench (D) to tighten Short Bolts (A) and Long Bolts (B). Do not fully tighten the Bolts (A&B) at this step.
Velcro
1
2
C
A C
2 2
A
C
B B
C C
C
A
D

Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 6
EEI–2988 ARMLESS CHAIR & OTTOMAN
STEP 3:
STEP 4:
Place 2 pieces of Chair Back Leg (3) to the front position of Chair Body (1) as shown.
Insert 2 pieces of Short Bolt (A) with 2 pieces of Flat Washer (C) into the bottom pre-drilled holes on Chair Back Legs (3)
through the bottom pre-drilled on the front of Chair Body (1).
Insert 2 pieces of Long Bolt (B) with 2 pieces of Flat Washer (C) into the top pre-drilled holes on Chair Back Legs (3)
through the top pre-drilled on the front of Chair Body (1).
Use Allen Wrench (D) to tighten Short Bolts (A) and Long Bolts (B). Do not fully tighten the Bolts (A&B) at this step.
D
1
Hardware & Tools required
Ax2 Bx2 Cx4 Dx1
3 3
2
2
3
1
A
C C
B
D
C
A
D
C
B
C
A
C
B
Carefully turn over the assembled chair.
Please put a heavy object or seat one adult on top of the assembled Chair to pressure the chair for leveling.
Turn upside down again, then use Allen Wrench (D) to tighten Short Bolts (A) and Long Bolts (B) clockwise until secure.
Hardware & Tools required
Dx1

Customer Service 908-368-1025︱www.modwayfurniture.com Page 4 of 6
EEI–2988 ARMLESS CHAIR & OTTOMAN
STEP 5:
Carefully cover the bottom of Chair Body (1) by Velcro as shown.
Carefully turn over the assembled Chair.
STEP 6:
1

Customer Service 908-368-1025︱www.modwayfurniture.com Page 5 of 6
EEI–2988 ARMLESS CHAIR & OTTOMAN
STEP 7:
4
Make the position for assembling Ottoman Legs (5) fully visible.
Place 4 pieces of Ottoman Legs (5) to the position of Ottoman Body (4) as shown.
Insert 1 piece of Short Bolt (A) with 1 piece of Flat Washer (C) into the bottom pre-drilled holes on Ottoman Legs (5)
through the bottom pre-drilled on Ottoman Body (4).
Insert 1 piece of Long Bolt (B) with 1 piece of Flat Washer (C) into the top pre-drilled holes on Ottoman Legs (5) through
the top pre-drilled on Ottoman Body (4).
Repeat the same steps for the remaining Ottoman Legs (5).
Use Allen Wrench (D) to tighten Short Bolts (A) and Long Bolts (B). Do not fully tighten the Bolts (A&B) at this step.
STEP 8:
Hardware & Tools required
Ax4 Bx4 Cx8 Dx1
5
C
A
B
C
D
C
A B
C
C
A
C
C C
C C
B
B B
A
A
D
4
Hardware & Tools required
Dx1
Carefully turn over the assembled ottoman.
Please put a heavy object or seat one adult on top of the assembled ottoman to pressure the chair for leveling.
Turn upside down again, then use Allen Wrench (D) to tighten Short Bolts (A) and Long Bolts (B) clockwise until secure.
D
5
5
5 5

Customer Service 908-368-1025︱www.modwayfurniture.com Page 6 of 6
EEI–2988 ARMLESS CHAIR & OTTOMAN
Assembly is complete. Your chair and ottoman are ready to be used now!
STEP 9:
Carefully cover the bottom of Ottoman Body (4) by Velcro as shown.
Carefully turn over the assembled Ottoman.
Place the assembled Chair and Ottoman to the position you desired.
STEP 10:
4