modway Plywood EEI-509 User manual

EEI-509 COFFEE TABLE
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 1 of 2
Thank you for purchasing the MODWAY COFFEE TABLE.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the table, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 15 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6. Please keep all fitting out of reach of children.
Hardware:
A. Allen Wrench M4 x 1
B. Bolt M6x30mm x 8
Components:
1 Top Panel x1 2 Leg x 4
1
2
2
2
2

EEI-509 COFFEE TABLE
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 2 of 2
STEP 1:
Put Top Panel (1) on a carpeted or padded surface.
Place Legs (2) to the back of the Top Panel (1) as shown.
Insert 2 pieces of Bolts (B) into the pre-drilled holes on 1 pieces Leg (2) through the pre-drilled holes on Top
Panel (1). Use Allen Wrench (A) to tighten Bolts (B) clockwise until secure.
Repeat the same way to assemble the other three pieces of Legs (2).
Hardware & Tools required
STEP 2:
Carefully turn over the assembled coffee table.
Assembly is complete. Your coffee table is ready to be used now!
2
2
2
2
1
2 2
2 2
1
A
B
A
x 1
B
x 8