modway EEI-3020 User manual

Page 1 of 3
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
padded area, in the room that it is intended for. Approximate assembly time: 20 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6. Please keep all fitting out of reach of children.
Hardware:
A. Bolt 1/4”x25mm x 8
B. Flat Washer x 8
C. Allen Wrench x1
Component:
1 Sofa Body x1 2 Base with legs x 1 3 Seat Cushion x 1
4 Back Cushion x 3 5 Pillow x 3
5
4
4
2
1
3
4
5
5
SOFA
Thank you for purchasing the SOFA.
instructions.
2. Owing to the size and weight of the sofa, we recommend that it is assembled by two adults, on a carpeted or

Page 2 of 3
Hardware & Tools required
STEP 2:
Carefully turn over the assembled Sofa Body (1) and Base with legs (2) from step 1 as shown.
2
A
C
B
A
C
B
2
1
A
x 8
x 8
B
x 1
C
1
2
1
2
STEP 1:
Please put Sofa Body (1) on a carpeted or padded surface.
Attach Base with legs (2) to the bottom of Sofa Body (1) by using 8 pieces of Bolts (A) with 8 pieces of Flat
Washers (B) as shown. Tighten Bolts (A) by using Allen Wrench (C) as shown.
SOFA

Page 3 of 3
STEP 3:
Put Seat Cushion (3) to the seat of Sofa Body (1), put 3 pieces of Back Cushions (4) and 3 pieces of Pillows (5)
to the top of Seat Cushion (3).
Assembly is complete. Your Sofa is ready to be used now!
3
3
4
4
3
4
4
4
4
5
5
5
5
3
5
5
SOFA