modway EEI-3270 User manual

EEI-3270 ARMLESS CHAIR/EEI-3318 OTTOMAN/EEI-3319 CORNER
Customer Service 609-256-9000︱www.modway.com
Page 1 of 4
Thank you for purchasing the MODWAY CORNER/ CHAIR/ OTTOMAN
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the sofa/ chair/ottoman, we recommend that it is assembled by two adults,
on a carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of children.
Hardware:
Components:
Bolt M8x60mm x4
Flat Washer x4
1. Ottoman Body x1 2. Leg x4 3. Seat Cushion x1
x1
B.
Allen Wrench M8 x1
C.
A.
D.
Felt Pad x4
4. Back cushion x 4 （1 pc Back cushion for EEI-3270; 3 pcs Back cushions for EEI-3319）
x1

EEI-3270 ARMLESS CHAIR/EEI-3318 OTTOMAN/EEI-3319 CORNER
Customer Service 609-256-9000︱www.modway.com
Page 2 of 4
STEP 1:
THE ASSEMBLY STEPS OF EEI-3270 ARMLESS CHAIR/ EEI-3318 OTTOMAN/ EEI-3319 CORNER ARE
THE SAME. THE FOLLOWING ILLUSTRATION SHOWS THE ASSEMBLY STEPS OF EEI-3318 OTTOMAN.
1. Please put Ottoman Body (1) on a carpeted or padded surface.
2. Open the Zipper strip on the bottom of the Ottoman Body (1) and take out the 4 pieces of Legs (2) and
hardware bag.
STEP 2:
1. Attach 1 piece of Leg (2) to the bottom of Ottoman Body (1) by using 1 piece of Bolt (A) and
1 piece of Flat Washer (B) as shown. Repeat the same steps for other 3 pieces of Legs (2).
2. Tighten Bolts (A) by using Allen Wrench (C) as shown.
3. Tear off the cover of the Felt Pad (D) and attached it on the
bottom of the leg after tighten all Bolts (A) as shown.
+ Hardware bag

EEI-3270 ARMLESS CHAIR/EEI-3318 OTTOMAN/EEI-3319 CORNER
Customer Service 609-256-9000︱www.modway.com
Page 3 of 4
STEP 3:
1. Close the Zipper strip on the bottom of the Ottoman Body (1).
2. Carefully turn over the assembled Ottoman Body (1) and Legs(2) from step 2 as shown.
STEP 4:
Put Seat Cushion (3) to the assembled ottoman as shown.
As for the Seat Cushion (3) for EEI-3270 and EEI-3319, please tear off the cover of velcro strip then connect
Seat Cushion and Body.
Put 1 piece of Back Cushion (4) to EEI-3270 and 3 pieces of Back Cushions (4) to EEI-3319.
Assembly is complete.

EEI-3270 ARMLESS CHAIR/EEI-3318 OTTOMAN/EEI-3319 CORNER
Customer Service 609-256-9000︱www.modway.com
Page 4 of 4
STEP 5
EEI-3318 Ottoman with EEI-3270 Armless Chair, EEI-3319 Corner have three Combination of options as
shown below.
Option A: Align the pre-installed Clip to the pre-installed Post as shown.
Push EEI-3318 Ottoman, EEI-3319 Corner and EEI-3270 Armless Chair slowly until the Clip and the Post
click together tightly.
If you want to unlock the sofa combination: Lift up EEI-3319 Corner and move EI-3318 Ottoman and EEI-
3270 Armless Chair apart from EEI-3319 Corner.
Option B : Option C :
Assembly is complete. The sectional sofa is ready to enjoy now