modway EEI-4208 User manual

EEI-4208 COFFEE TABLE
Customer Service 609-256-9000︱www.modway.com
Page 1of 3
Thank you for purchasing the MODWAY COFFEE TABLE.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the Coffee Table, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6.Please keep all the pieces out of reach of children.
Hardware:
Components:
Bolt M6x18mm x8
Flat Washer x8
1. Big Top x1 2. Big Base x1 3. Small Top x1 4. Small Base x1
A.
D.
Allen Wrench x1
C.
Spring Washer x8
B.

EEI-4208 COFFEE TABLE
Customer Service 609-256-9000︱www.modway.com
Page 2of 3
STEP 1:
1. Please put Big Top (1) upside down on a carpeted or padded surface.
2. Attach Big Base (2) to Big Top (1) by using 4 pieces of Bolts (A) with 4 pieces of Spring Washers (B)
and 4 pieces of Flat Washers (C) As shown.
3. Use Allen Wrench ( D) to tighten all Bolts (A) clockwise as shown.
STEP 2:
Repeat the same Step 1 to assemble the Small Top (3) and Small Base (4) as shown.

EEI-4208 COFFEE TABLE
Customer Service 609-256-9000︱www.modway.com
Page 3of 3
STEP 3:
1. Carefully turn over the assembled big table and small table.
2. Insert the small table into the large table as shown.
Assembly is complete. Your Coffee Table is ready to enjoy now!