modway EEI-4409 User manual

EEI-4409 ARMCHAIR
Customer Service 609-256-9000︱www.modway.com
Page 1 of 2
Thank you for purchasing the MDOWAY ARMCHAIR.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the armchair, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of children.
Hardware:
Components:
Bolt M8x25mm x12
Screw x4
1. Armchair Body x1 2. Front Leg x1 3. Back Leg x1
A.
B.
C.
Allen Wrench x1
D.
Screw driver x1
* Not include hardware package

EEI-4409 ARMCHAIR
Customer Service 609-256-9000︱www.modway.com
Page 2 of 2
STEP 1:
1. Please put Armchair Body (1) on a carpeted or padded surface.
2. Attach 1 piece of Front Leg (2) to the front of Armchair Body (1) by using 6 pieces of Bolts (A). Tighten
Bolts (A) by using Allen Wrench (C) clockwise fully as shown in Figure 1.
3. Insert 2 pieces of Screws (B) into the holes in Front Leg (2), tighten Screws (B) by using
Screw Driver (D) clockwise fully as shown in Figure 2.
4. Repeat the same steps for the Back Leg (3) as shown.
STEP 3:
Carefully turn over the assembled Armchair Body (1), Front Leg (2) and Back Leg (3) by two adults.
Assembly is complete. Your armchair is ready to enjoy now!