modway Sector EEI-2874 User manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 2
Thank you for purchasing the MODWAY DINING TABLE！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the dining table, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all fitting out of reach of children.
Hardware:
A
CAllen Wrench M5 x1
Components:
1 Leg x2
2
Top Frame x1
Flat Washer M8 x12
Bolt M8x40mm x12
B
1
2
2
EEI-2874/ EEI-2875/ EEI-2876 DINNING TABLE

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 2
STEP 1:
STEP 2:
Put Table Top (1) upside down on a carpeted or padded surface.
Place 1 piece of Leg (2) to Table Top (1) as shown.
Insert 6 pieces of Bolts (A) with 6 pieces of Flat Washers (B) into the pre-drilled holes on Table Top (1) through the pre-drilled
holes on Legs (B).
Use Allen Wrench (C) to tighten Bolts (A) clockwise until secure.
Repeat the same steps for the remaining Leg (B).
Hardware & Tools required
Ax12 Bx12 Cx1
B
1
2
1
2
Assembly is complete. Your dining table is ready to be used now!
Carefully turn over the assembled dining table.
2
B
A
B
A
B
A
B
A
B
AB
A
B
A
B
A
B
A
B
A
B
AB
A
C
A
C
B
A
B
A
EEI-2874/ EEI-2875/ EEI-2876 DINNING TABLE