modway Prospect EEI-813 User manual

EEI-813/2551/2613/1043/2614/2615 LOVESEAT/ CHAIR
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 1 of 2
Thank you for purchasing the MODWAY LOVESEAT / CHAIR.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the loveseat, we recommend that it is assembled by two adults, on a carpeted
or padded area, in the room that it is intended for. Approximate assembly time: 20 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6. Please keep all fitting out of reach of children.
Component:
1 Loveseat Body x1 2 Leg x 4
EEI-1043/2614/2615
EEI-813/2551/2613
The assembly steps are the same as Loveseat
2
1
2

EEI-813/2551/2613/1043/2614/2615 LOVESEAT/ CHAIR
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 2 of 2
STEP 1:
Please put Loveseat Body (1) on a carpeted or padded surface.
Open the zipper from the bottom of the Loveseat Body (1) and take out the 4 pieces of legs.
Attach 1 piece of Leg (2) to the bottom of Loveseat Body (1) by hand as shown.
Please note that the legs needs to be in the right direction.
Repeat the same steps for other 3 pieces of Legs (2).
STEP 2:
Close the zipper on the bottom of the Loveseat Body (1).
Carefully turn over the assembled Loveseat Body (1) from step 1 as shown.
Assembly is complete. Your loveseat is ready to be used now!
1
2
2
2
2
2
1
2
2
2
2
2
1
Legs &
Hardware inside