Moe's ALASKA SIDEBOARD YC-1018-20 User manual

ASSEMBLY INSTRUCTIONS.
A L A S K A S I D E B O A R D
YC - 1018 - 20
T H A N K Y O U F O R Y O U R P U R C H A S E !

PARTS AND HARDWARE.
NOTES.
STEP 1. STEP 2.
Thank you for purchasing this quality product! Be
sure to check all packing material carefully for
small part that may have come loose inside the
carton during shipping.
CAUTION: The item is heavy, take care when
lifting and use 2 people to manuever safely.
2. Leg x2
A. Felt Ø20-3 x4
1. Body cabinet x1 3. Support bar x2
B. Wood dowel
Ø8-30 x4
STEP 3.
C. Minifix and
housing x4
4. Shelf x2
D. F-Bolt M6-50 x14 E. Allen key x2
F. Plastic pin x8
(Extra x4)
G. Anti-tip x2
2 x2
A
C
2
2
3
3
B
C
1
2
3
D
E

PARTS AND HARDWARE.
NOTES.
STEP 4. STEP 5.
Thank you for purchasing this quality product! Be
sure to check all packing material carefully for
small part that may have come loose inside the
carton during shipping.
CAUTION: The item is heavy, take care when
lifting and use 2 people to manuever safely.
2. Leg x2
A. Felt Ø25-3 x4
1. Body cabinet x1 3. Support bar x2
B. Wood dowel
Ø8-30 x4
C. Minifix and
housing x4
4. Shelf x2
D. F-Bolt M6-50 x14 E. Allen key x2
F. Plastic pin x8
(Extra x4)
G. Anti-tip x2
F
4
4

PARTS AND HARDWARE.
NOTES.
STEP 6. STEP 7.
Thank you for purchasing this quality product! Be
sure to check all packing material carefully for
small part that may have come loose inside the
carton during shipping.
CAUTION: The item is heavy, take care when
lifting and use 2 people to manuever safely.
2. Leg x2
A. Felt Ø25-3 x4
1. Body cabinet x1 3. Support bar x2
B. Wood dowel
Ø8-30 x4
C. Minifix and
housing x4
4. Shelf x2
D. F-Bolt M6-50 x14 E. Allen key x2
F. Plastic pin x8
(Extra x4)
G. Anti-tip x2
4
STEP 8.
F4

ANTI-TIP PART LIST.
NOTES.
Thank you for purchasing this quality product! Be
sure to check all packing material carefully for
small part that may have come loose inside the
carton during shipping.
CAUTION: The item is heavy, take care when
lifting and use 2 people to manuever safely.
2.Wall brackets x4
5. Short screw x4
1. Nylon strap x2
4. Long screw x4
3. Plastic screw x4
Wood
If fixing to wood make sure
that it isn’t chipboard as
screw easily pull away
Brick or Masonry
Use an appropriate wall
plug provided you are sure
your wall is sound
Cavity wall
Special toggle wall plugs
are needed. Seek expert
advice

Dear Customer,
Congratulations on your purchase of a piece of furniture made from lacquered, veneered Walnut.
The individual wood slats in your piece of furniture are especially selected and sorted by hand by skilled craftsmen. They follow specific guidelines securing the quality
demands and design preferences that lay out the form of this furniture range. Through this we have manufactured a unique piece of furniture with the heterogeneity that
characterizes wild-oak, clearly showing the wood’s natural irregularities of strong grains, knots and smaller cracks. Features that are often avoided in other furniture ranges.
Twists in the wood, smaller cracks and repairs are parts of the uniqueness of the range, and therefore do not qualify for complaints. Wood is a living material, affected by
temperature and moisture for a long period after you start using it. Thereby, table tops and top plates will expand and shrink according to the seasons, and cracks and
spaces that vary in time are some of the joys of owning a natural product. If extension leaves are made from mdf, which is a stable material, these will never be able to fit the
table by 100 %.
To make sure that you will enjoy many years of satisfaction with your piece of furniture, it is imperative with the right care and maintenance. Kindly follow the below
guidelines, and we guarantee that your unit will stay beautiful in the years to come. It is our recommendation that you ask your furniture supplier for advice in any instance.
Daily maintenance:
1. Clean the surface with a clean, wrung out cloth. Never use detergents
2. Coloured stains like red wine must be dried off immediately
3. Avoid extreme humidity and heat. Do not place the item close to heat sources
4. Legs for coffee and dining tables must be fastened occasionally