Moen CHATEAU 7454 User manual

1-1/8" (29mm)
MAX. DECK
THICKNESS
(mounting bracket
open side up)
5-7/16" (138mm)
NOMINAL
ESCUTCHEON
10-1/4” x 2-1/4"
(261mm x 58 mm)
8-1/4”
(209mm)
IN OPEN POSITION
9-1/8"
(232mm)
6-11/16"
(170mm)
4-7/8"
(126mm)
32"
(813mm)
The use of aerator part 116711
reduces flow to a maximum of
1.5 gpm (5.7L/min.)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CHATEAU®
Single-Handle Kitchen Faucet
w/Protégé Side Spray in Deck Plate
Model: 7454
Bulk Model: 67454
NOTE: DESIGNED TO INSTALL THROUGH
3 HOLES 1-1/4" (32mm) MIN. DIA. AND 4" (102mm)
ON CENTER.
Rev. 12/11
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supplies with 3/8" compression fittings
• Includes rotégé side spray
OPERATION
• Loop style handle
• Temperature controlled by 100˚ arc of handle travel
• Will operate with less than 5lbs. of force
FLOW
• Spout flow is limited to 2.0 gpm (7.6 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Designed and manufactured to comply to ASME A112.18.1/
CSA B125.1, and all applicable re quire ments referenced
therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California roposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
There is more than 1 version of this model.
Page down to identify the version you have.

The use of aerator part 116711
reduces flow to a maximum of
1.5 gpm (5.7L/min.)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CHATEAU®
Single-Handle Kitchen Faucet
w/Protégé Side Spray in Deck Plate
Model: 7454
Bulk Model: 67454
( ulk packed 12 per carton)
1-1/8" (29mm)
MAX. DECK
THICKNESS
(mounting bracket
open side up)
5-3/16" (132mm)
NOMINAL
ESCUTCHEON
10-1/4” x 2-1/4"
8-5/8”
(220mm)
IN OPEN POSITION
9-1/8"
(232mm)
6-3/8"
(163mm)
4-7/8"
(126mm)
9-1/2"
(241mm)
8-1/4"
(210mm)
NOTE: DESIGNED TO INSTALL THROUGH
3 HOLES 1-1/4" (32mm) MIN. DIA. AND 4" (102mm)
ON CENTER.
Rev. 12/11
DESCRIPTION
• Metal construction with either chrome plated, decorative glacier,
Ivory or sand finish
• 1/2" I S connections will accept standard ball hose connection for
3/8" tubing
• Includes rotégé side spray
OPERATION
• Loop style handle
• Temperature controlled by 180˚ arc of handle travel
• Will operate with less than 5lbs. of force
FLOW
• Aerator is limited to 2.0 gpm (7.6 L/min) at 60 psi
CARTRIDGE
• 1225 cartridge design (not 1200)
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to CSA B-125.1, ASME A112.18.1,
ICC A117.1 and all applicable re quire ments referenced therein
including NSF 61/9
• Complies with California roposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations