Moen ICON MOENTROL T2154BB User manual

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
DESCRIPTION
•Metal construction with chrome plated, LifeShine® brushed
bronze or LifeShine® brushed nickel finishes
OPERATION
•Lever style handle with temperature indicator on the
escutcheon, pull-on/push-off operation
•Temperature operates through an 180° arc of handle
travel (full cold to full hot)
•Adjustable temperature limit stop to control
maximum hot water temperature
•Pressure balancing mechanism maintains selected
discharge temperature to ± 2°
CARTRIDGE
•1225® cartridge design
•Nonmetallic/nonferrous and stainless steel materials
•Accommodates back to back installations
STANDARDS
•Third party certified to: CSA B-125, ASME A112.18.1M,
ANSI A117.1 and all applicable requirements referenced therein
WARRANTY
•Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
•5 year warranty if used in commercial installations
ICON™MOENTROL®
Single-Handle Valve Trim Only
Models: T2154, T2154BB, T2154BN
7" (178mm)
ESCUTCHEON
DIAMETER
2" CC
(
51mm
)
1 7/8" IPS (48mm)
MAX WALL
HOT
INLET
COLD
INLET
FINISHED WALL LINE
FACE OF STUD
4-1/2" (114mm)
WALL OPENING
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
TUB SHOWER
7-1/2"
(191mm)
MIN
TUB RIM
6'-6"
(1981mm)
L
C
1-3/8" (35mm)
2-1/16" MAX. (52mm)
1-7/16" MIN. (37mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
FLOOR LINE
1 3/8"
(35mm)
1-1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
L
C
3-1/2”
(89mm)
5-7/8”
(149mm) 8-13/16”
(224mm)
7-5/16”
(186mm)
ADA
Rev. 2/07