Moen Camelot 22211 User manual

CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Camelot®
Triple Bowl Drop-In Sink
Model: 22211
(KT-4322-3)
– DISCONTINUED –
Installation Detail
38" (965mm)2-1/2"
(64mm) 2-1/2" (64mm)
1-1/2"
(38mm) DIA. TYP
3/8"
(10mm)
R-TYP
2"
(51mm)
2"
(51mm)
2-1/2"
(64mm)
7"
(178mm)
14"
(356mm)
14"
(356mm)
43"
(1092mm)
9"
(229mm)
14-1/2"
(368mm)
4-1/2"
(114mm)
4-3/4"
(121mm)
DIA-TYP
3-1/2"
(89mm)
DIA-TYP
2"
(51mm)
R-TYP
1-3/4"
(45mm)
9"
(229mm)
18"
(457mm)
22"
(559mm)
1"
(25mm)
18"
(457mm)
7-1
/
4"
(184mm)
5"
(127mm)
4"
(102mm) TYP
4-1/2"
(114mm)
SINK DESCRIPTION
• Manufactured of 20 gauge stainless steel
• The two large bowls are a minimum of 14" x 18" x 7-1/4"
and the small bowl is 9-1/2" x 14-1/2" x 5"
• The sink ledge has three fixture mounting holes,
1-1/2" in diameter and 4" on center
• Has one 3-1/2" diameter recessed drain
opening in each bowl
• Soundshield undercoating maximizes sound deadening
and inhibits condensation
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 42-3/8" x 21-3/8", with a
3/8" corner radius. A tolerance of plus or minus
1/16" is acceptable
STANDARDS
• Third party certified to ASME A112.19.3/CSA B45.4 and
all applicable specifications referenced therein
WARRANTY
• Warranted for ten years against material or
manufacturing defects
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
COUNTERTOP
SEALANT MATERIAL
Rev. 11/10