Moen TL188 User manual

Specifications
WATER-SAVING CHATEAU® POSI-TEMP®
Single-Handle Tub/Shower Trim Kit
Model: TL188
(Bulk Packed 12 per carton)
DESCRIPTION
• Metal construction with a chrome plated finish.
• Includes shower arm, flange, non-metalic shower head and
non-metallic diverter tub spout
OPERATION
• Handle operates counterclockwise through a 270° arc with off at
6 o’clock and maximum hot at the 9 o’clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 3°
FLOW
• Showerhead is limited to 1.75 gpm at 80 psi
CARTRIDGE
• 1222 cartridge design
• Accommodates back to back installations
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to meet CSA B125.1, ASSE 1016, ASME A112.18.1,
ANSI A117.1 and all applicable requirements referenced therein
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
THIN WALL APPLICATION
THICK WALL APPLICATION
FINISHED WALL LINE
FACE OF STUD
DIRECTION
OF HANDLE
ROTATION
6.5"
(165mm)
ESC. DIAM.
4-1/2"
(114mm)
2"CC
(
51mm
)
1 7/8" IPS (48mm)
MAX WALL
C
L
2 1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
1 3/8" (35mm) 1 3/8"
(35mm)
3/16"(typ) (5mm)
L
C
1 1/2" MAX.
(38mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
FLOOR LINE
SHOWER
45" (1143mm)/
48" (1219mm)
32" (813mm)
TUB/SHOWER
AND TUB ONLY
6'-6"
(1981mm)
NOMINAL
FLOOR LINE
6"- 11"
(152mm- 279mm)
7-13/16”
(199mm)
3-1/2”
(89mm)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
There is more than 1 version of this model.
Page down to identify the version you have.
Rev. 2/11

Specifications
WATER-SAVING CHATEAU® POSI-TEMP®
Single-Handle Tub/Shower Trim Kit
Model: TL188
(Bulk Packed 12 per carton)
DESCRIPTION
• Metal construction with a chrome plated finish.
• Includes shower arm, flange, non-metalic shower head and
non-metallic diverter tub spout
OPERATION
• Handle operates counterclockwise through a 270° arc with off at
6 o’clock and maximum hot at the 9 o’clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 3°
FLOW
• Showerhead is limited to 1.75 gpm at 80 psi
CARTRIDGE
• 1222 cartridge design
• Accommodates back to back installations
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to meet CSA B125.1, ASSE 1016, ASME A112.18.1,
ANSI A117.1 and all applicable requirements referenced therein
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
THIN WALL APPLICATION
THICK WALL APPLICATION
FINISHED WALL LINE
FACE OF STUD
DIRECTION
OF HANDLE
ROTATION
7" (178mm)
ESC. DIAM.
4-1/2"
(114mm)
2"CC
(
51mm
)
1 7/8" IPS (48mm)
MAX WALL
C
L
2 1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
1 3/8" (35mm) 1 3/8"
(35mm)
3/16"(typ) (5mm)
L
C
1 1/2" MAX.
(38mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
FLOOR LINE
SHOWER
45" (1143mm)/
48" (1219mm)
32" (813mm)
TUB/SHOWER
AND TUB ONLY
6'-6"
(1981mm)
NOMINAL
FLOOR LINE
6"- 11"
(152mm- 279mm)
7-13/16”
(199mm)
3-1/2”
(89mm)
Rev. 8/07 FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)