Moen PureTouch 7850 User manual

© Moen Incorporated, 2002
Printed in U.S.A
INS115D June 02
MOEN INCORPORATED
23500 Al Moen Drive
North Olmsted, OH 44070-8022
Au Canada :
Moen inc.,
2816 rue Bristol , Oakville
(Ontario) L6H5S7
The PureTouch Filtering Faucet System with the MicroTech 5000 filter
cartridge has been tested and certified by NSF to ANSI/NSF Standard 53
for lead reduction (97.7%) and cyst reduction (99.95%) and ANSI/NSF
Standard 42, Class 1 for chlorine reduction (93.3%) and taste and odor
reduction. Claims are calculated based on NSF accepted practice of
average percent reduction.
El Sistema de Mezcladora Filtradora PureTouch con Cartucho de Filtro
MicroTech 5000 ha sido probado y certificado por la NSF de acuerdo a la
Norma 53 de reducción de plomo (97.7%) y de esporas (99.95%) y la
Norma 42 de la ANSI/NSF, Clase 1 para reducción de cloro (93.3%) y
reducción de olor y sabor. Estos cálculos están hechos sobre la base de
la práctica del promedio de reducción porcentual aceptada por la NSF.
Le système de robinet avec filtre PureTouch, avec cartouche de filtre
MicroTech 5000, a été testé et homologué par la NSF et répond à la
norme 53 d’ANSI/de NSF concernant la réduction du plomb (97,7 %) et
la réduction de kystes (99,95 %) ainsi que la norme 42 d’ANSI/de NSF,
classe 1, concernant la réduction du chlore (93,3 %), du goût et de
l’odeur. Les réclamations sont calculées selon la pratique acceptée NSF
de la réduction moyenne de pourcentage.
Tested and Certified
to ANSI/NSF
Standards 42 & 53
NSF®
INS115D
OWNER’S MANUAL
Model Numbers 7850, 7850S, 7850W

INS115D
1HELPLINE: 1-800-BUY-MOEN
PRODUCT FEATURES
Newly styled handle
and spout receptor
Electronic
filter life
indicator
Filtered
water
button
Filtered
water outlet
Stream & Spray
Actuating Buttons
Packed with deck
plate or single
hole deck ring
Easy to replace water
filter integrated in
pullout spout
➤
➤
➤
➤

INS115D 2
HELPLINE: 1-800-BUY-MOEN
WELCOME TO MOEN®
Congratulations! You’ve purchased the revolutionary
PureTouch®Filtering Faucet System. This faucet is the first of
its kind and is designed to provide great tasting, cleaner water
with just one touch. To get the most enjoyment from your
Moen PureTouch Filtering System, please read all installation
and operating instructions carefully. With simple care and
maintenance, the PureTouch Filtering Faucet System will
provide many years of reliable performance. If you should
have any questions, please call us toll-free at 1-800-BUY-MOEN.
TABLE OF CONTENTS
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Water Filtration Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Parts Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Battery and Upper Housing Replacement . . . . . . . . . . . . . . .11
Filter Replacement Instructions . . . . . . . . . . . . . . . . . . . . . . . .13
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

WATER FILTRATION SAFEGUARDS
Your Moen PureTouch®Filtering Faucet System integrates carbon block
filtration technology designed by Culligan International into a faucet
spout. This technology is fast and effective at reducing or removing
contaminants commonly found in water and is certified by NSF. The
PureTouch Filtering Faucet System and installation must comply with
State and Local laws and regulations. To ensure optimal operation of
your new Moen faucet, please read the following safeguards carefully.
MicroTech™ Filter Cartridges
•MicroTech filter cartridges will reduce :
Chlorine, Taste and Odor (MicroTech 5000, 3000, 1000)
Lead (MicroTech 5000, 3000)
Cysts (Cryptosporidium, Giardia)(MicroTech 5000)*
* The contaminants removed or reduced by this filter are not necessarily in your water.
•Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
Systems certified for cyst reduction may be used on disinfected
waters that may contain filterable cysts.
•MicroTech filter cartridges are designed for replacement after
dispensing 200 gallons of filtered water (approximately 3 months).
Water conditions and usage may affect filter life.
•The electronic indicator will signal when filter replacement is
necessary (see page 13).
•Use only MicroTech filter cartridges with the PureTouch Filtering
Faucet System.
•Filter flow rate = .4-.5 gpm at rated pressure (20psi minimum - 125psi
maximum).
Water Temperature
•Minimum/Maximum faucet operating temperature = 40° - 150°F.
•CAUTION: Do not filter water above 100° F.
MicroTech Filter Flushing Instructions
•New MicroTech Filter Cartridge: Allow cold water to run through a
new filter for 5 minutes to flush out any loose carbon particles. Once
these small black specks are washed out the filter is ready for use.
•Daily Use: Allow cold water to run through the filter for 10-15 seconds
prior to first use. If the filter has not been used for two days, run cold
water through the filter for 60 seconds prior to the first use.
Questions
•If you have any questions please call our toll-free helpline,
1-800-BUY-MOEN. Monday through Friday 8:00 a.m. to 8:00 p.m.,
Saturday 8:00 a.m. to 6:30 p.m.
3HELPLINE: 1-800-BUY-MOEN INS115D

INS115D 4
HELPLINE: 1-800-BUY-MOEN
PARTS DESCRIPTION• DESCRIPTION DES PIÈCES • DESCRIPTIÓN DE PIEZAS

23
4
5
6
7
8
9
10
11
12
13
14
15
24
26
27
31
32
30
33
34
20
28
29
16
17
18
19
22
43
35
21
23
1
ENGLISH
FRANÇAIS
ESPAÑOL
1
Solid Handle Body
Corps de poignée solide
Cuerpo de Manija Sólido
2
Set Screw
Vis de blocage
Tornillo Opresor
3
Plug Button
Bouton de bouchage
Batón Tapón
4
Dome
Dôme
Cúpula
5
Cartridge Screw
Vis de cartouche
Tornillo del Cartucho
6
Handle Adapter
Adaptateur de poignée
Adaptador del Monomando
7
Handle Connector
Raccord de poignée
Conector del Monomando
8
Pivot Retainer
Bague de retenue de pivot
Retenedor de Pivote
9
Wave Spring Washer
Rondelle élastique ondulée
Arandela de Resorte en Onda
10
Pivot Stop
Arrêt de pivot
Parada Pivote
11
Retainer Nut
Écrou de retenue
Tuerca Retenedora
12
Bearing Washer
Rondelle de roulement
Arandela de Présion
13
Retainer Clip
Bride
Presilla Retenedora
14
1225 Cartridge
Cartouche 1225
Cartucho 1225
15
Spout Receptor
Récepteur de bec
Receptor del surtidor
16
Hose Connection
Raccord de tuyau
Conexión de Manguera
17
Screen Washer
Rondelle filtre
Arandela de Malla
18
Quarter Turn Connector
Raccord de quart de tour
Conector de un Cuarto de Vuelta
19
Pull-out Spout
Bec rétractable
Surtidor portátil
20
Upper Housing Unit
Boîtier supérieur
Unidad del cárter superior
21
Filter Outlet Nut
Écrou de sortie de filtre
Tuerca de la Salida del Filtro
22
Aerator
Aérateur
Aireador
23
Filter Cover
Couvercle de filtre
Cubierta del Filtro
24
Threaded Discharge Tube
Tuyau de décharge fileté
Tubo de descarga Roscado
26
Supply Tubes (2)
Tuyau d’alimentation (2)
Tubos de Alimentación
27
Deck Plate
Plaque de comptoir
Placa de Cubierta
28
Deck Ring
Anneau de comptoir
Anillo de Cubierta
29
Ring Gasket
Joint annulaire plat
Empaque
30
1/2" Threaded Fitting (2)
Raccord fileté de 1/2 po (2)
Montaje Roscado de 13mm (2)
31
Support Plate
with gasket
Plaque de soutien avec bague
d'etanchéité
Placa de Soporte
con Empaque
32
Mounting Bracket
Support de fixation
Soporte de Montaje
33
Medium Mounting Nut
Écrou moyen de montage
Tuerca de Montaje Mediana
34
Spout Hose
Tuyau de bec
Manguera del surtidor
35
Counter Weight
Contrepoids
Contrapso
36
Mounting Tool
Outil de montage
Herramienta de Montaje
37
Filter (not shown)
Filtre (non illustré)
Filtro (no se muestra)
38
Large Mounting Nut (2)
(not shown)
Gros écrou de montage (2)
(non illustré)
Tuerca de Montaje Grande (2)
(no se muestra)
39
Washer
Rondelle
Arandela
36
Wand Appliance
Dispositivo del rociador
Appareil de filtration

5HELPLINE: 1-800-BUY-MOEN
INSTALLATION INSTRUCTIONS
CAUTION:
Always turn water supplies OFF before removing existing faucet. Turn
faucet on to relieve water pressure and to ensure water is completely off.
OLD FAUCET REMOVAL: Your old faucet may attach in a number of different
ways depending on the brand. To remove, reverse steps in installation
instruction sheet of old faucet, follow instructions in a DIY type of book or
follow instructions listed below.
After years of use, you may need to use a penetrating oil spray on the faucet
mounting hardware to help loosen corrosion and assist in removing the faucet
connections.
Disconnect water supply lines from faucet supply lines. Remove mounting
hardware using a basin wrench or channel lock pliers. Lift out faucet.
Thoroughly clean and dry the mounting surface after removal of old faucet.
INSTALLING PURETOUCH® FILTERING FAUCET SYSTEM
Helpful Tools: Phillips screwdriver, adjustable wrench (2)
CAUTION: Do not use with portable washing devices, i.e.
dishwashers, washing machines.
NOTE: Do not bend supply tubes until instructed in step 5.
1. Place screen washer (17) in hose connection (16) and
attach to pull-out spout (19). A few threads on the
quarter turn connector (18) will be showing.
2. With the spout receptor (15) facing directly forward
and threaded discharge tube (24) in back, feed
small end of hose (34) down through spout
receptor. When encountering resistance, feed the
hose through with a push/pull motion. Set aside
faucet assembly.
Depending on your sink configuration, you have the
option to install your faucet with a deck plate (27) or
a round deck ring (28). NOTE: Never use deck plate
(27) and deck ring (28) together on one sink.
3a.FOR INSTALLATION USING DECK PLATE.
Install faucet through deck holes (threaded
shank (24) to back). Center faucet on sink
with support plate (31) oriented in sink holes.
Position spout to the side to keep faucet from
tilting forward. Go to step 4b for installation of
mounting bracket (32).
(1)
(2)
(3a)
INS115D
(3a)

3b.FOR INSTALLATION USING SMALL ROUND DECK
RING. Place round deck gasket (29) under the small
round deck ring (28). Place deck ring over hose (34)
and supply tubes (26) of faucet assembly.
4. For both installations, align the faucet assembly with
the threaded discharge tube (24) in the back. Align
tabs on faucet to holes in deck plate (27) or deck
ring (28). Place assembly down through sink while
pushing assembly toward back of sink as far as possible.
5. A groove in the treaded discharge tube (24) indicates the
minimum amount of thread lenght which must be exposed
for proper attachment of mounting nut (33) and hose.
5a. FOR INSTALLATION WHERE THE DECK IS LESS
THAN 7/8”, install mounting bracket (32) (open side
up) by hooking around supply tubes, as shown, and
sliding up and onto threaded discharge tube (24).
Mounting bracket (32) can be easily installed onto
threaded discharge tube by gently pulling the
supply tubes forward away from the discharge tube,
making sure not to kink the tubing. Install and
HAND TIGHTEN medium mounting nut (33).
5b.FOR INSTALLATION WHERE THE DECK IS
GREATER THAN 7/8”, turn the mounting
bracket over (open side down). Install
and HAND TIGHTEN medium mounting
nut (33). Be sure the faucet is aligned
properly with threaded discharge
tube directly in back.
6. Rotate the spout receptor (15) to the
left and right, noting where it stops. Faucet should extend to
the left and right from center equally. To readjust, untighten
medium mounting nut (33) then move spout receptor to
desired rotation. Hand tighten medium mounting nut.
Check movement of hose before final tightening of nuts. If
hose does not move freely, gently bend the supply tubes
(26) out. Do not kink supply tubes. Tighten mounting nut (33)
with the tool (36) provided. Use heavy duty screwdriver
through the holes in the bottom of the tool to tighten faucet
securely. Recheck for alignment, be sure that the faucet is
centered properly on the sink and that it does not shift
position when the spout is moved from side to side.
7. Assemble hose (34) to threaded discharge tube (24) and
tighten with adjustable wrench.
(3b)
(5a)
(<7/8”)
(5b)
(>7/8”)
(7)
➤ ➤
SINK
SINK
INS115D HELPLINE: 1-800-BUY-MOEN 6

INS115D
7HELPLINE: 1-800-BUY-MOEN
8. Counterweight (35) is designed to snap together onto the
spout hose. To disassemble counterweight, depress tabs
and pull halves apart, or pry halves apart with flat-head
screwdriver. Assemble counter weight at the bottom of the
spout hose loop. Align tabs on each half of the
counterweight with the slots on the other half of the
counterweight. Squeeze halves together until they snap-
together. Counter weight should not slide on the hose..
CAUTION: Severe bends of the supply tubes may cause
crimping. Restricted water flow could result.
9. CAREFULLY bend the supply tubes
and align with water supply lines. DO
NOT KINK SUPPLY TUBES. Connect
your water supply lines to threaded
fittings (30) (using large nuts (38) if
necessary). Hot water supply tube is
the longer tube (on left). Hold
threaded fitting with a wrench to
prevent twisting and collapse of the
copper tube while tightening with another wrench.
10.Pull pullout spout in and out to check for free movement of hose. If needed,
adjust the placement of weight to aid the clearance of the hose.
11.Faucet flushing is required before installation is complete. (See below)
LINE FLUSHING INSTRUCTIONS
IMPORTANT: Pipe chips, sand, stones and other solids found in new and
renovated plumbing can damage the sealing surfaces of the filter cartridge and
cause a leak. To avoid damage, DO NOT TURN ON SUPPLY VALVES until
instructed below.
1. Pull hose out of spout receptor, tie a cloth around the hose to keep it from
slipping back into the spout receptor.
2. Unscrew the hose from the bottom of the quarter turn connector (18) and
remove screen washer. Turn on supply valves. Direct hose into sink, then turn
the faucet on in the full cold position (handle pointing to the right) to turn on
the cold water supply for 3-5 minutes.
3. Leaving the handle in the open position, turn to the full hot position (handle
pointing to the left) and turn on the hot water supply for 3-5 minutes.
4. Place handle in the closed position. Remove the quarter turn connector (18)
from pullout spout and reassemble with screen washer to hose. Do not
reassemble pullout spout to quarter turn connector since MicroTech filter
installation is required. Check under the sink for system leaks.
(9)

INS115D 8
HELPLINE: 1-800-BUY-MOEN
MICROTECH™ FILTER INSTALLATION
NOTE: Faucet will not operate in any mode without filter. Filter should be left in
protective bag until ready for installation. The MicroTech™ filter is a high
performance carbon block filter developed specially for the PureTouch Filtering
Faucet System. Once the filter is installed in the pullout spout, it should not be
removed until it is to be replaced. The electronic module keeps track of the
amount of filter life remaining and will signal you when the filter change is
necessary. If a partially used filter is removed and reinstalled, the electronic
indicator will automatically reset and will not accurately reflect filter life
remaining.
Use only MicroTech filter cartridges with the PureTouch Filtering Faucet System
1. Remove the filter cover by lifting it up and away
from the pullout spout body.
2. Insert the new filter by aligning the outlet tubes
on the filter with the inlet ports of the spout
body and gently pressing in and down. Upon
successful installation of the filter cartridge, the
filter life indicator will beep three times and
reset automatically. (Do not remove the filter
until it is to be replaced.)
3. Reinstall the filter cover by positioning the
alignment tab with the corresponding notch in
the main pullout spout body and gently
pushing in and down.
4. Attach the pullout spout to the hose by
aligning the dots on the quarter turn connector
(18) and the spout. Push the quarter turn
connector onto the spout assembly and turn it
clockwise, locking it in place.
5. Allow cold water to run through the new filter
for 5 minutes to flush out any loose carbon
particles. (See page 9 for filtered water mode.)
Once these small black particles are washed
out the filter is ready for use.
The PureTouch System installation is now complete. Please read carefully the
operation instructions to ensure optimal performance.
CARE AND MAINTENANCE
All that is needed to clean your faucet is a soft damp cloth. Moen does not
recommend the use of scour pads, cleansers or chemicals. The abrasive nature
of these substances could damage the faucet’s finish. A non abrasive car wax will
help to protect the finish. DO NOT PLACE WAND APPLIANCE IN DISHWASHER.
ALIGN
DOTS
(2)
(3)
(4)

INS115D
9HELPLINE: 1-800-BUY-MOEN
OPERATING INSTRUCTIONS
Controlling The Water
The PureTouch System has three options for water delivery; unfiltered stream,
unfiltered spray and filtered water.
The spray and stream actuating buttons are on the sides of the pullout spout,
the filtered water button is located on the front of the spout.
Stream/Spray flow rate = 2.2gpm maximum at 60psi / 2.5gpm maximum at 80psi.
STREAM MODE:Unfiltered water in regular
stream flow.
When the water is turned on at the faucet, the
spout will always begin operating in the regular
stream mode.
SPRAY MODE:Unfiltered water in a wide
pattern.
If a wide spray mode is desired, push the spray
button while the water is on. To return to stream
mode, push the stream button.
FILTERED WATER MODE: Filtered water
dispensed through the separate filtered water
outlet.
Pressing the front filtered water button will divert
water through the filter and dispense filtered
water from a separate outlet. The only way to
exit the filter mode is to shut the faucet off.
CAUTION: Only filter cold water. Do not filter
water above 100° F.
Electronic Indicator
The electronic indicator provides the following visual and audible feedback on
the filtering system:
•Successful installation of a new filter (audible & visual)
•Percent of filter life remaining (visual)
•Filter is actively filtering water (visual)
•Low filter warning (audible & visual)
•Depleted filter warning (audible & visual)
•Low battery warning (audible & visual)
The electronic indicator is powered by a replaceable, standard 3V lithium watch
battery (2032) designed to last several years.
Cont’d