Moen TS340 Series User manual

C
L
6-3/4"
(171mm)
7"
(177mm)
10-5/16"
(262mm)
4-1/2"
(114mm)
WALL OPENING
Finished
Wall Line
Floor Line
2-3/4"
(70mm)
7-1/8"
(181mm)
DESCRIPTION
• Metal construction with finishes identified by suffix
• Includes 7” rainfall showerhead, arm and flange
OPERATION
• Handle operates counterclockwise through a 270° arc with
off at 6 o’clock and maximum hot at the 9 o’clock position.
Shut off in clockwise direction
• Adjustable temperature limit stop to control maximum
hot water temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 3.6˚F (± 2˚C)
FLOW
• Showerhead is limited to 2.5 gpm max. (9.5 L/min)
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to CSA B125.1, ASME A112.18.1, ANSI A117.1,
ASSE 1016, and all applicable requirements referenced therein
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
FELICITY™ POSI-TEMP®
Single-Handle Tub/Shower (Trim Only)
Models: TS340 series-valve trim only
TS342 series-shower trim only
TS344 series-tub/shower trim
Valve: 2500 series
62300 series
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 3/11