Moen TS3516sp User manual

Valves Sold Separately
TS3516sp: Rev. 11/07
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Divine™
ExactTemp® 3/4" Thermostatic Tub/Shower Trim
Models: TS3510 series-valve trim only
TS3512 series-shower trim only
TS3516 series-tub/shower trim
Valves: S936 - thermostatic
S956 - volume control
2-11/16"
(68mm)
6-7/16"
(164mm)
8" (203mm) Recommended
6" (152mm) MIN.
WALL OPENING
4-3/4"
(121mm)
6-15/16"
(176mm)
5-1/16"
(129mm)
WALL OPENING
2-1/8"
(54mm)
3-3/16"
(81mm)
7-7/8"
(200mm)
6-7/16"
(164mm)
2-11/16"
(68mm)
WALL OPENING
4-3/4"
(121mm)
8" (203mm) Recommended
6" (152mm) MIN.
WALL OPENING
2-1/8"
(54mm)
7-7/8"
(200mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• For use with S936 3/4”thermostatic valve and S956 volume control
with integral checkstops
OPERATION
• Flow lever operates counterclockwise through a 90˚ arc with off at 6 o’clock
and maximum flow at the 3 o’clock position. Shut off in clockwise direction
• Temperature lever operates through a 340˚ arc with maximum cold at
full clockwise rotation and maximum hot at full counterclockwise rotation
• Safety stop preset temperature at 105˚F ( 41˚ C)
• Safety stop override allows maximum temperature at 120˚F (49˚C)
• Factory established temperature range from 70˚F (21˚C) to 120˚F (49˚C)
FLOW
• Showerhead is limited to 2.5 gpm max. (9.5 L/min)
CARTRIDGE
• 130156 thermostatic cartridge design with non metallic/nonferrous materials
• 130157 volume ceramic disc cartridge design
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein including ASSE1016
• for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the original
consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
SHOWER ONLY APPLICATION
TUB/SHOWER APPLICATION
M•pact™System
ADA