INSTRUCTIONS
Attach the coaxial cable from
the antenna to the Jolt® amplifier.
Conecte el cable coaxial de
la antena al amplificador Jolt®.
Attach the coaxial cable on
the Jolt amplifier into the
ANT/IN connector on the back
of the TV.
Conecte el cable coaxial en el
amplificador Jolt en el conector
ANT/IN en la parte trasera de
su televisor.
Power the Jolt amplifier by
plugging the amplifier’s USB
cable into an open USB port
on the back of the TV or into a
wall outlet using the supplied
power adapter.
Encienda el amplificador Jolt
conectando el cable USB del
amplificador en un puerto USB
disponible en la parte trasera
del televisor o en una toma de
corriente de la pared utilizando
el adaptador de corriente incluido.
In the TV’s setup menu, set
the tuner mode to
“Antenna”
or “Air”. Refer to the TV manual
for detailed instructions.
En el menú de ajuste de su
televisor, ponga el modo de
sintonización a “Antena” o
“Aire”. Consulte el manual de
su televisor para instrucciones
más detalladas.
In the TV’s setup menu, set
TV to “scan” for channels.
This can sometimes be listed
as auto-program, auto-scan,
channel search or channel
scan. Refer to the TV manual
for detailed instructions.
En el menú del ajuste de su
televisor, ponga su televisor a
“escanear” por canales. Esto
puede estar listado como
auto-programar, auto-escanear,
búsqueda de canal, o escaneo
de canal. Consulte el manual de
su televisor para instrucciones
más detalladas.
USB Power Adapter*Jolt® Amplifier
BOX INCLUDES
Antenna*
*Denotes objects not included
*Actual USB power adapter may dier in appearance.
1
2
ANT/IN
Back of TV a. TV’s USB Port
b. Wall Outlet
Or
POWER OPTIONS:
3
Coaxial Cable*
Connects to antenna
C
M
Y
CM
MY
CY
CMY
K
M-JA-20140416.pdf 1 4/17/14 9:20 AM