Monoprice IR-320 User manual

Care and Maintenance
• Keep the IR-320 Remote Extender dry. If it gets wet, wipe it
dry immediately.
• Use and store the IR-320 only in normal temperature
environments. Extreme temperature can shorten the life of
electronic devices
• Handle the IR-320 gently and carefully. Dropping it can
damage the circuit board and can cause it to work
improperly.
• Keep the IR-320 away from dust and dirt, which can cause
premature wear of parts.
• Wipe the IR-320 with a damp cloth occasionally to keep it
looking new. Do not use harsh chemicals, cleaping solvents,
or strong detergents.
Specifications
Operating Voltage 120 VAC, 6OH2/
DC 12V, 150mA
Power Consumption (pair) 4 Watts Max
Transmission Frequency 417.8MHz+/-1MHz
Power Gain 10dBM
Effective operating range about 30M
(clear line of sight)
REMOTE CONTROL
EXTENDER
MODEL : IR-320
OWNERS MANUAL

LOCATION OF CONTROLS
Transmitter Side Receiver Side
Transmitter and
Receiver Front
Accessory
■ Infrared Remote
Control Antenna
Romoto Control
Indicators &
IR Transmitter/Receiver
Transmitter Picture 6
Picture 5
Keep Vertical
Working Angle not
more than ♦/• 15*
Remote Control
Picture 7
DIslance Nol less than 0.3M and not moro than 5M
Working Angle not more than ■>/-15'

Installation & Operation Guide
Receiver
Picture 1 Picture 2
Working with extender probe
Power
Adaptor
Make sure the IR probe is stlckcd toward
[R sensor receiving Window with proper position
(about within 0 SM and working angles *!■ 15*).
Picture 3
Picture 4
Working without
extender nrobe
Working Angle not more than *!•
Working without extender probe
r J:f
"V HF
Not less than 0.3M and not more than 5M
Working Anglo not more than •/-15*
CAUTION:
This equipment has been tested and found to comply with FCC
and Canadian DOC. regulation. These regulations are designed
to provide reasonable protection against harmful inter-ference
in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with this manual, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular situation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on. the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna
• Increase the distance between the interfered equipment
and the receiver
• Connect the interfered equipment into an outlet on a circuit
which is different from that the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
IMPORTANT SAFETY PRECAUTIONS
• To prevent fire or shock hazard, do not submerge or
expose this products to water
• To avoid electric shock, do not open this units. The IR-320
contains no user serviceable parts. Doing so will void trie
warranty
• Use only the power supply provided with the IR-320
• Do not overload wall outlets or extension cords.
• If you are experiencing difficulty with this products, do not
attempt to service it yourself. Please call your vendor for
assistance.

Product Description
The IR-320 Wireless Infrared Remote Control Extender enables
you to extend the range of your present Infrared Remote
Control so that you can operate VCRs, stereos, Cable
Converter. Satellite receivers, etc. Virtually any where with in
your home.
Unlike ordinary remote controls which are only effective in close
range.
* line of sight" use, The IR-320 use the radio frequency which
can operate through walls, doors, around corners, etc.
APPLICATION DIAGRAM
1. Stereo system with remote control:
Applications
The Remote operation of electronics products that utilize IR
(Infrared) remote control technology such as:
• Satellite Receivers
• Television
• VCR's (Video Cassette Recorders)
• CDs (Compact Disc)
• DVD's (Digital Video Disc)
• LDP's (Laser Disc Players)
• Cable Converter Boxes
• Audio / HI-FI Stereo Systems
• Wireless Video Sender Systems
• Any (IR) Remote Controlled Devices
"Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference,
including interference that may cause undesired operation of
the device."
2. DSS / Satellite Receiver with remote control: