Monoprice KVM-LII User manual

KVM EXTENDER
KVM-Ln
(Local)
KVM-Rn
(Remote)
KVM-EH
USER MANUAL vi.o
Package Contents
• KVM Extender Local Unit x 1
• KVM Extender Remote Unit x 1
• User manual x 1
• Power adapter DC 9V/600mA x 2
• 3-in-1 cable (3L-3512C) x 1
If any thing missedt please contact with your vendor.
Features
■ The extension of VGA, PS/2 keyboard, PS/2 mouse
signal up to 180 meter away by using the KVM
Extender and one CAT5 cable.
■ High VGA resolution up to 1280x1024.
■ Support Auto/Manual video quality adjustment.
- Support video gain and equalization adjust.
■ Support 3 hot key to combine other equipment.
• Two control privilege modes - "Share" & "Local only".
- Extra console port is available on Local side.
■ Auto console selection between Local and Remote.
Specifications
PC Connector
Monitor Connector
Keyboard Connector
Mouse Connector
Mode Switch Button
RJ-45 Connector
LEDs
Power
Link
Video Resolution
Cable Distance
Power Adapter
Housing
Weight
Dimensions(LxWxH)
1xHD-15 Female
(VGA/KB/MS)
None
1 xHD-15 Female
1 x 6 pin mini-DIN Female (PS/2)
1 x 6 pin mini-DIN Female (PS/2)
None
128Qx1Q24@60HZ
180 m (Max.)
DC 9V 600mA
Aluminum
235 g
130x83.5x29.5 mm
.230JL
KVM-LH (LOCAL) REAR VIEW
(REMOTE) FRONT VIEW
Hardware Requirements
Console
PC
Cable
1 x Highest resolution monitor,
x PS/2 mouse,
x PS/2 keyboard.
x VGA, SVGA or Multisync card,
x 6-pin mini-DIN (PS/2) mouse port.
x 6-pin mini-DIN (PS/2) keyboard port.
x 3-in-1 KVM cable or equivalent.
KVM-LH (LOCAL) FRONT VIEW
KVM-RII (REMOTE) REAR VIEW
CAT.5
Connector
Power LED
Link LED
Mode SW
Button
PS/2 Mouse
PS/2 Keyboard
Plugs the CAT5 cable into this
connector.
On when the unit power on.
Off when the unit has no power.
Flash when "Local Ustnq only".
On when links successfully.
Off when no link to Remote unit.
Flash when Remote usinq.
Toggle the mode switch between
"Share" & "Local only"
The PS/2 Mouse plugs here.
The PS/2 Keyboard oluqs here.
*P.S. Power and Link LED flash simultaneously when
KVM-EII is in the "command mode".
-1-
-2-
-3-

Installation
Rear View KVM-LD (Local) Front View
HO-15 I 3in1
VGA h~[ cuttom
cabta cW.
KVM-RII
mote)
r
KVM-Rn (Remote)
RaarView Front View
CAT5/E
(600feet/180m)
1. Connect PC console port by using standard 3-in-1
cable to Local. (First connects PS/2 mouse, then
connects PS/2 keyboard and VGA connector).
2. Connect CATS cable to Local.
3. Connect CATS cable to Remote.
4. Connect keyboard, mouse and monitor to Local.
5. Connect keyboard, mouse and monitor to Remote.
6. Power on PC and Local.
7. Check the VGA quality by the monitor. If the video
quality is not good. Please use hot key of Remote to
adjust the video quality.
Operation
Press hot key (default: Scroll Lock) twice to enter the
command mode, and press below key to select, and
press "ESCW key to exit command mode.
Scroll lock
Num lock
Shift (left/ right)
"Scroll lock" is the hot kev.
'Num lock" is the hot key.
"Ctrl" (left/ right) is the hot kev.
KVM-En supports two modes:
Share mode:
■ The two users (Local and Remote) can access one
PC base on a first-come, first-served policy.
■ When the Local user accessing the PC, the Link
LED of Remote will flash to remind the other user
that it can't access now, and vice versa.
Local only mode:
■ Only the Local user can access the PC. The
Remote user can't access the PC (include the
video).
■ The Power LED of Local and Remote will flash to
remind both the Remote and the Local user that
right now only the Local can access the PC.
■ Only the Local user can switch the access mode.
Toggle the push button in the front panel of Local.
Press hot key (default: Scroll Lock) twice to enter
the command mode, and press below key. After
operation, press "ESC key to exit command mode.
Switch to "Local only" mode.
Switch to "Share" mode.
Our KVM Extender provides 2 ways to adjust video
quality: Manually or Automatically. The user can
process the adjustment by hot key as follow.
Press: hot key (default: Scroll Lock) twice of Remote to
enter the command mode, and press below key to select
video jadjustment function. Then press f or i key to adjust
the ysjlue. When finished, press "ESC" key to end adjust.
N
D
Adjust video quality Automatically.
Adjust video Gain.
Adjust video Equalization.
Set video and hot key to Default.
NOTE: All the video parameters have 32 levels to adjust.
You can also press & hold f or | to continually adjust
video,j and if you adjust it to the last level then there will
be a long" beep sound.
Troubleshooting
1. If the Power LED of Remote is not on, please make
sure power adapter is connected to Remote.
2. If no video signal is displayed on the monitor.
(1) Please check all of VGA cable and CATS cable
is loosened or disconnected.
(2) 3-in-1 cable was not attached to PC during boot
up process.
(3) Power adapter is not connected.
3. If Video signal is foggy or un-clear, please check VGA
connector, or low the VGA resolution for long cable. It
is highly recommended to use "optimal CATS cable
length" to get the best video quality and not to waste
unnecessary CATS cable.
4. For the PC without PS/2 connector, please apply
PS/2-to-USB adapter to Local.
-5-
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-6-