Monoprice 39306 User manual

Installation Guide
P/N 39306
Above Fireplace Pull-Down Full-Motion Articulating
TV Wall Mount with Soundbar Mount- For TVs 55in to 80in,
Max Weight 132lbs, VESA®Patterns Up to 800x500,
Rotating , Height Adjustable

AA.
X 4
X 1
X 1
X 1
X 1
X 2
X4
CC.
EE.
HH.
BB.
DD.
X 2
GG.
X 1
II.
X 1
FF.
INCLUDED HARDWARE
F: M8 x 35 mm
x4
E: M8 x 20 mm
x4
D: M6 x30 mm
x4
B: M5 x 30 mm
x4
C: M6 x 15 mm
x4
A: M5 x 15 mm
x4
H: M5 / M6
x9
I: 5 mm
x8
J: 13 mm
x4
G: M8 x 50 mm
x4
L: M8
x6
K: M8 x 70mm
x6
M: Concrete Anchor
x6
N: M8 x 60 mm
x4
O: M6 x 15 mm
x2 x2
P: M6
x5
mm52x4M:S6M:Q
x2
R: M6 x 8 mm
x8
T: M5 x 8 mm
x4
X: 5 mm
W: M6 Y: 8 mm Z: 8 mm 8ft Premium
HDMI Cable
Carpenter’s
Level
U: Cable Ties V: Arm Lock Pin
2

REQUIRED TOOLS (Not Included)
SAFETY WARNINGS AND GUIDELINES
You will need the following tools for installation
Stud Finder Pencil Protective Eyewear
Socket Wrench Thermometer1/2" SocketPhillips Screwdriver
Drill 1/4" Drill Bit
Please read this entire manual before using this device, paying extra attention to these safety warn-
ings and guidelines. Please keep this manual in a safe place for future reference.
• Do not exceed the rated weight limit. Doing so can cause the mount to fail, resulting in equipment
damage and/or severe personal injury.
• Ensure that the structure to which this mount will be installed is capable of supporting at least four
times the total weight of the mount and any connected displays.
• Use the supplied mounting screws. Tighten the screws using the appropriate tool, but take care
not to over-tighten them.
• This device is intended for indoor use only.
• This device contains small parts that could pose a choking hazard to small children. Keep this
device and its spare parts out of reach of children.
• Inspect the installation at least once every three months to ensure that it is secure and safe to use.
• Please take an inventory of the package contents to ensure you have all the items shown in the
Parts List. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
3

Mount your television conveniently above your fireplace using this Mount. It is capable of
supporting televisions with VESA®patterns from 100x100 and 800x500 and weighing 55-132 lbs
(25-60kg). The mount allows you to keep your TV safely up and out of the way when not in use,
then it can be pulled down to eye level for comfortable viewing.
Additional Features Include:
• Adjustable sides to accommodate displays from 55"-80" at 55-132 lbs
•VESA®compatibility (100x100 - 800x500)
• Full Motion mount that allows for ±30° swivel, ±5° rotation and +10°/-5° tilt adjustment
• The Mount pulls down for comfortable viewing and lays flat to save space when not in use
• Designed to mount above fireplace mantels
INSTALLATION AND OPERATION
• Use a thermometer to assess the temperature above the fireplace. The temperature at the
front of the fireplace mantel must never exceed 100 degree F. Additionally, if the wall is warm
to touch it is not suitable for installation.
• For installation to wooden studs, ensure that the studs are spaced no more than 24inches
apart and the dry wall is no more than 5/8" thick. The studs should be symmetrically
positioned or the installation will not be symmetrical to the fireplace mantel.
• The fireplace mantel must extend no more than 24" (60.9 cm) from the surface of the wall
FEATURES
Mantel must NOT
extend more than
24" from the wall
≤24"
STUDS
100°F Max
4

INSTALLATION
size
Less than 8” Wallboard height +5”
8”~11” Wallboard height +9”
11”~13” Wallboard height +11”
13”~16” Wallboard height +14”
Space height
4. This mount is intended for flat screen televisions (LCD, LED, Plasma) only. The
mounted television should be between 55 ~ 80" and weigh between 55~132 lbs.
5. The vertical space above the mantel must be greater
than the height of the wallboard .The required vertical
space depends on how far the mantel extends out
from the wall.
Use a tape measure to determine the center point of the mantel. Mark the centerline with a
pencil or tape.
Use a stud finder to locate the two studs on the wall and measure the distance between the
two.
5
Mantel
Extends

To determine the height distance
from the , reference step 5
on page 5.
Be sure to drill into the center of
the wood stud.
6

Insert Concrete Anchor (M)
To determine the height distance
from the mantel, reference step 5
on page 5.
7

3
4
5
5mm
N
Q
H
8

6
7
BRICK
OR
CONCRETE M
KL
KL
WOOD
9

8
9
10
Lock the arm
V
A - G
H
I - J
or
O
P
5mm
10

11
11
12
a.
W/O Soundbar
With Soundbar
R
R
b.
11

13
14
15
Please adjust the Handle distance
to the height of the sound
Q
H
12

16
17
18
T
HH
13

19
Keep the TV’s height
in this angle.
Adjusting the force value
in this state is the easiest.
Release
Adjustable the bracket’s constant force
Attention: The weight of the TV set in the weighing range
“ + ” :Increase the constant force
A: The TV sets can stay at any height.
B: Turn to “ - ” until the bracket is free hovering.
C: Turn to “ + ” until the bracket is free hovering.
“ - ” :Reduce the constant force
90°
14

19 -2
19 -3
B: The TV sets up
Adjust until free hovering
Turn to “ ”
8mm
C: The TV sets down
Z
+
15

19 -4
20
21
8mm Z
+
Adjust until free hovering
Turn to “ ”
Level adjustment
±5°
a. b.
Height adjustment 9.1"
9.1"
16

22
23
Tilt adjustment
-5 ~ +10°
Swivel ±30°
(TOP VIEW)
(SIDE VIEW)
17

24
25
26
wire
cable
Cable ties
Cable Ties
Pull in the cover plates
4.7(Min)
28.7(Max)
20.1(Max)
UP
Down
+10°/-5°
4.7
UP
Down
3.9
220
13.6
26.8
16
24
Ø3.5
3.9
3.9
7.9
8.3(Min)~16.9(Max)
3.5
Ø0.3
±5°
7.9(Min)~32.7(Max)
33.9(Max)
Ø0.3
±30°
Units: Inches
18