Morgan MVC-TC181SS User manual

USER MANUAL
3-in-1 Vacuum
Cl an r
M C-TC181SS
E-mail: [e-mail]
www.morgan.my
Market Expansion
Services by
www.dksh.com.my
facebook.com/morganappliances

SPECIFICATIONS
PARTS IDENDIFICATION
32
A
B
C
D
E
F
G
I
J
K
L
M
H
A. Motor Head
B. Switch
C. Float (prevents water from
entering motor when is full tank)
D. olyester filter
(removable for
liquid suction)
E. Hand Lock
F. Suction Inlet
G. Tank
H. Flexible Hose
I. Extension Wands
J. Ellipse Brush
K. Crevice Nozzle
L. Squeegee Nozzle
(for wet suction)
M. Master Nozzle
(for dry suction)
RATED OLTAGE / FREQUENCY 220-240 ~ 50/60Hz
RATED WATTAGE 1800 W
CAPACITY 32 L
C O N T E N T S
3
3
4
4
7
Parts Identification
Specifications
Important Safeguard
Operating Instructions
Troubleshooting

5
OPERATING INSTRUCTIONS
4
IMPORTANT SAFEGUARD
1. This appliance is strictly for indoor use only and not for commercial or industrial use.
2. Before using the appliance, ensure that the voltage indicated on the appliance
corresponds to the local rated voltage before connecting the appliance to the power
supply.
3. If the power cord is damaged, switch off immediately and have it replaced by the
manufacturer or authorized service technician.
4. Never suck up asbestos or asbestos dust or anything that is burning or smouldering.
5. Never suck up flammable substances and do not suck up ashes they are cold. Do not
use the appliance in rooms with explosive vapours (petrol, thinners. Solvents).
6. Never suck up inflammable or corrosive liquids such as petrol or other volatile
substances.
7. Avoid sucking up sharp object or objects can obstruct the hose.
8. Always use the appliance horizontally position. Never operate it on a slanted surface
or hang it upside down, otherwise the water may enter the motor to damage it.
9. Do not pull, lift or carry by the power cord. Do not use the cord as handle. Avoid
closing the motor head on the cord or yank the cord around or against sharp edges or
corners.
10. Do not use the appliance without the filter in place.
11. Never leave refuse in the dust box for long period of time.
12. Do not handle the power plug, switch or the appliance with wet hands.
13. Always remove the power plug from the power socket in the event of any malfunction,
and after use or before cleaning.
14. Do not positions the appliance or power cord on or near hot surfaces or near open
flames.
15. Keep the appliance out of children’s reach. This appliance should only be used by
adults.
OPERATING INSTRUCTIONS
ATTENTION
TO ENSURE THE EFFICIENT PERFORMANCE OF THE MACHINE, CLEAN THE
POLYESTER AND DRUM AFTER E ERY USE
THE VACUUM CLEANER DESIGN IS DESIGN FOR:
1. Dry vacuum suction of dust.
2. Wet vacuum suction of water based liquids.
3. Blow vacuuming can be useful for dusting out the garage or workshop.
DRY ACUUMING
1. Insert the cloth filter bag
in the tank.
2. Assemble the motor
head on the tank and
lock it manually.
3. Connect the flexible hose
to the Suction Inlet.
4. Connect the wand and
the extensions to other
side of the Flexible Hose.
5. Select & connect the
most suitable accessory.
6. Connect the power plug
to the power outlet and
switch on the power.
7. Uses of the Crevice Tool.
10. Uses of the Master Nozzle for carpet tool.
8. Uses of the Ellipse
Brush.
9. Uses of the Squeegee
Nozzle for floor cleaning.

76
OPERATING INSTRUCTIONS
If a problem occurs always switch off the unit immediately
1. MOTOR DOES NOT OPERATE
• Ensure unit is plugged in correctly to the power outlet and switched on.
2. SUCTION POWER IS REDUCED OR MOTOR OPERATE BUT SUCTION
POWER IS WEAK
• The maximum level of dust or water collection has reached the limit. ress the
ON/OFF button, disconnect the power cord from the power outlet and empty tank.
• Check and clear any blockages within the system or accessory.
• Ensure the filter is clean and not damaged in any way.
3. HEAT FROM APPLIANCE
• Heat generated from appliance is normal.
TROUBLESHOOTING
WET ACUUMING
BLOWING ACUUM
• Empty and clean the tank.
• Fill the hose directly into the exhaust opening.
1. Remove the cloth filter
bag.
2. Assemble the Motor
Head on the tank and
lock it manually.
3. Connect the flexible hose
to the Suction Inlet.
4. Connect the wand and
the extensions to other
side of the Flexible Hose.
5. Connect the Squeegee
Nozzle.
6. Connect the power plug
to the power outlet and
switch on the power.
7. Uses of the Squeegee Nozzle.