Morphy Richards MRFHT16 User manual

INSTRUCTION MANUAL
Model: MRFHT16
Read these instructions carefully before
using this appliance for the rst time.
STORE THESE INSTRUCTIONS CAREFULLY
Heated Throw (Overblanket)
For product hints and tips plus more join us at
facebook.com/MorphyRichardsAUS instagram.com/morphyrichardsau
www.morphyrichards.com.au

2
Model: MRFHT16
Colour: Cream
Rated Voltage: 220-240V~ 50/60Hz
Rated Power: 160W
Heat Settings: 6
Safety Auto Off: 3 hours
Overheat Protection: Yes
Cord Length: 2.4m
Detachable Controls: Yes
Machine Washable: Yes
Blanket Dimensions: 180 x 130cm
Blanket Material: Micro Flannel Fleece
SPECIFICATIONS
• For greater precision, always refer to the rating label placed on the product.

3
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
CAUSE INJURY AND/OR DAMAGE AND MAY INVALIDATE
YOUR WARRANTY.
The use of any electrical appliance requires the following
common sense safety rules.
• Before connecting and switching on the heated throw, ensure
that the voltage indicated on the rating label corresponds to
the mains voltage in your home.
• Do not plug into a powerboard, double adaptor or the like.
The power plug must be inserted directly into the wall power
socket.
• Read the instructions carefully, in conjunction with the
illustrations, before using for the first time.
• If the cord of this heated throw is damaged, unplug and
discontinue use of the product then contact the manufacturer.
• If the supply cord or controller is damaged, it must be
completely replaced by a special cord assembly available
from the manufacturer or its service agent.
• Check that your heated throw is not damaged before
switching it on.
• Always unfold or unroll before switching on.
• Failure to observe these instructions will result in overheating.
This will activate the overheat safeguard system, thus leaving
the heated throw inoperative.
• Misuse of this heated throw will invalidate your warranty.
IMPORTANT!!
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY
AND RETAINED FOR FUTURE REFERENCE.
Also note the information presented on the appliance

4
• When storing the heated throw, allow it to cool down before
folding. Fold neatly but not tightly (or rolled) without sharp
bends in the heating elements and store where no other heavy
objects will be placed upon it.
• The heated throw should not be used on an adjustable bed or
chair. However, if the heated throw is used on an adjustable
bed or chair, check that the heated throw and cord do not
become trapped or rucked (creased or bunched up), for
example, in hinges.
• The heated throw is not to be used by very young children
(0-3 years). Children under the age of three are not to use this
appliance due to their inability to react to overheating.
• The heated throw is not to be used by young children over
the age of three unless the controls have been preset by a
parent or guardian, or unless the child has been adequately
instructed on how to operate the controls safely.
• This heated throw is not intended for use by persons
(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
• This heated throw must not be used by persons insensitive
to heat and other very vulnerable persons who are unable to
react to overheating.
• This heated throw is not intended for use by young children or
infirm persons without adequate supervision.
• Children should be supervised to ensure that they do not play
with the appliance.
• Heated throws are intended for human use only. Not for
animals and pets.
• Do not allow pets or animals to lie or chew on this product or
on the electrical cords etc.
• Prolonged application at the highest heat setting can result in
skin burns.
IMPORTANT SAFETY INSTRUCTIONS

5
• Do not use the heated throw rucked (creased) or folded.
• Keep the controller away from an open window.
• Keep the controller away from external heat sources. ie. a
heater, fire places etc.
• Do not use pins as these may damage the electric wiring.
• The flexible supply cord and switch must, as far as
practicable, be kept outside of the heated throw.
DO NOT COVER THE CONTROLLER.
• Do not switch the power on if the heated throw is wet or in a
folded or creased state.
• Switch off at the power outlet and remove the plug from the
mains when the heated throw is not in use.
• Do not leave heavy objects on the heated throw, e.g. folded
blankets, suitcases etc. when the heated throw is switched on
as this will trigger the overheat temperature device and render
the heaed throw PERMANENTLY inoperable. This may also
invalidate the warranty.
• Do not dry clean this heated throw. Cleaning liquid may have
a damaging effect on the insulation covering of the heating
element. Follow washing directions located on the heated
throw rating label. (Foot end of the blanket) and in this
Instruction Manual.
• Do not use in bed. This heated throw is not to be used as an
under or over blanket while in bed.
• This heated throw is not to be used in bed or while asleep.
• For additional protection, it is strongly recommend that the
use of a residual current device (RCD) with a tripping current
not exceeding 30mA be used on the circuit supplying this
product. If you are unsure if your home has this device, please
contact your nearest Electrical Contractor.
• WARNING: This appliance is NOT to be used with extension
leads and/or power boards.
IMPORTANT SAFETY INSTRUCTIONS

6
• Always treat electrical appliances with the upmost care. Do
not use this product in any other fashion or for any other
purpose other than stated in these instructions.
• If any abnormality or defect in operation is observed,
discontinue its use immediately and consult the distributor
regarding its examination and/or repair.
• The heated throw should be examined frequently for signs of
wear or damage, either of the blanket, controller or flexible
cord. If wear is visible or if any abnormality or defect in
operation in the heated throw is observed, discontinue use
immediately and consult a qualified and registered person for
service.
• It is recommended that your heated throw is inspected by a
qualified and registered person after 3 years of use.
• This heated throw is for domestic use only. It is not intended
for use in hospitals or the like.
• Only use the controllers supplied with this blanket.
IMPORTANT SAFETY INSTRUCTIONS
DO NOT use when folded or creased
DO NOT pierce with needles
Not to be used by very young children (0-3 years)

7
BEFORE FIRST USE
Turn off the power and remove the plug from the power source
• To fit the controller simply hold the socket on the heated
throw with one hand and push the controller plug all the way
until it clicks in. There are grooves to use as a guide.
• To remove the controller, hold the corner of the heated throw
and pull the controller plug directly out. Do not pull the
controller cable.
• Do not fold, roll or kink the cable. Allow the cable to hang
freely.
• Ensure the cable is not pulled so tight that it bends hard at the
heated throw connector end.
• Remove all packaging parts before initial operation.
• When the heated throw is used for the first time, it can smell
of plastic, but this disappears after a short time.
• Use the appliance as a heated throw blanket only. This
appliance is only for warming human bodies.
• The best results are expected when the blanket is placed onto
a body before switching it ON. Do not place the switch under
a cover.
• Pre-heating time takes about 10-30 minutes depending on
ambient room temperature.
CONNECTING THE CONTROLLER

USING THE CONTROLLER
IMPORTANT: Only use the heated throw with detachable
controller model BLV-C24.
Do not use any other controller for this blanket.
Heat Settings:
• 1-2 = Low heat 28-31°C (suitable for continuous use)
• 3-4 = Medium heat 34-37°C
• 5-6 = High heat 40-43°C (recommended for preheating only)
• Press the Power button to turn the blanket on.
• To increase the required heat setting, simple press the “+”
until you see the desired heat setting on the LED display.
• To decrease the required heat setting, simple press the “-”
until you see the desired heat setting on the LED display.
• Press the Power button on the controller to turn off the
blanket.
• TURN OFF AND UNPLUG THE HEATED THROW WHEN NOT
IN USE.
• Keep the controller away from external heat sources. i.e.
heater, fireplace etc.
When using the heated throw, some people may be susceptible to
a tingling sensation when alone or when touching someone else
using the blanket.
This ‘tingling’ feeling is known as an ‘electric field effect’ and is
occasionally known to happen across all makes and brands of
blankets. It is caused by the current flowing through the element
creating an Electromagnetic Field (EMF). Some people are more
susceptible to feeling this EMF tingling sensation than others. This
is no cause for concern and is in no way an electric shock.
ELECTRICAL FIELD EFFECT

9
• Place the heated throw flat ensuring that it does not overhang
anywhere. Avoid placing the heated throw where it can
become folded or crumpled. The heated throw may only be
switched on when it is flat and unfurled. It is recommended to
preheat it for 10-30 minutes.
• Once the heated throw has been placed correctly in position,
connect the controller supply plug to a suitable power outlet.
Press the power button ON. Select the desired heat setting on
the controller. The LED display on the controller indicates that
the blanket is ON.
• Only operate the heated throw with the supplied controller.
• CAUTION: The electronic components inside the controller
may lead to a slight warming of the controller when the
product is on. Therefore the controller must not be covered or
placed on top of the blanket when it is in operation.
• NOTE: Do not plug into a powerboard, double adaptor or the
like. The power plug must be inserted directly into the wall
power socket.
IMPORTANT: DO NOT COVER THE CONTROLLERS AT ANY
TIME.
• Keep the controller away from external heat sources. i.e.
heaters, fireplaces etc.
HEATED THROW PLACEMENT

10
Auto Off
• This controller is fitted with a 3 hour count down auto OFF
timer, which starts to countdown from when your heat setting
has been selected, and will switch off after 3 hours.
• Note: Once a heat setting has been selected and the
controller is powered ON, the countdown timer will not be
affected by adjusting the heat level.
• The timer will only be reset to 3 hours by pressing the Power
button OFF and then turning back ON.
• When the controller has timed out, the element will turn off.
Press the Power button back on to reset.
Preheat
• At normal ambient temperature you should allow at least 10-
30 minutes on heat setting “5-6” to preheat.
• You may use the heated throw sooner, while it’s still warming
up, however DO NOT leave the blanket on setting “5-6” while
on your body.
• Note: A cold room that has not been used for some time may
require a greater length of time to preheat.
Overheat Protection
• The heated throw is fitted with numerous overheat safeguard
systems. This offers protection against overheating or damage
to the elements by disengaging the power to the elements
before overheating hazards occur.
• Should there ever be a problem with the heating element
in the heated throw, it will automatically close down the
operation and the heated throw will turn off.
• The controller must not be covered. The controller has built in
protection, so that if the controller overheats, or the heating
element is damaged, it will automatically close down the
operation permanently.
OPERATION

11
• If overheating occurs, the heated throw is permanently
damaged and cannot be used again. A replacement will be
needed.
• NOTE: Keep the controller away from external heat sources.
i.e. heater, fireplace etc.
OPERATION
CLEANING & CARE
• This heated throw must be washed on the hand wash cycle
only (MAX 40°C). Never use hot water as the blanket may
shrink and will void the warranty.
• Before washing, first disconnect the plug connection and
remove the plug from the heated throw. We recommend that
the heated throw is washed separately. Ensure the controllers
do not get wet at any time.
• Use a mild detergent with dosage according to the
manufacturer’s instructions.
• Please note that excessive washing will wear out the heated
throw blanket. For this reason, it should only be washed a
maximum of 5 times throughout its entire life.
• Only use the heated throw when it is completely dry.
IMPORTANT: NEVER SWITCH ON THE HEATED THROW TO
DRY IT!

12
Treatment For Localised Soiling
• The area affected should be sponged gently using a natural
wool detergent or mild soap flakes dissolved in lukewarm
water (40°C Max), followed by two consecutive spongings
using clean, soap-free lukewarm water.
• Lightly compress the treated area between two towels to
absorb excess water.
• Do not wring or spin dry the heated throw.
• Refer to the section “Drying” for drying instructions.
• The connections to the blanket must be kept free of moisture.
Hand Washing (Recommended)
• Place the heated throw in lukewarm (40°C Max) water
(bathtub or large laundry tub is ideal) mixed with either a
natural wool detergent or with mild soap flakes.
• Soak the heated throw for approximately five minutes, and
then gently squeeze the soapy water through.
• Rinse the heated throw thoroughly with clean lukewarm water
until no more suds are visible and allow water to drain off.
• Refer to the section “Drying” for drying instructions.
• With normal use it is recommended that you hand wash your
heated throw once a year.
• Do not wring or spin dry the heated throw.
Machine Washing
• Place the heated throw in the washing machine with either a
natural wool detergent or with mild soap flakes.
• Set your machine to the Hand Wash/Delicate/Gentle cycle
(without Spin dry) and set the water temperature to warm
(40°C Max). Do NOT wash with HOT water.
• When the cycle has finished, allow water to drain off. Refer to
the section “Drying” for drying instructions.
CLEANING & CARE

13
• Do not wring the heated throw. Do not spin dry.
Drying
• Spread the blanket out on a clean surface (e.g. a large table)
to dry in a shady area.
• Your heated throw can also be dried on a clothes line
provided the blanket is not creased or folded.
• Ensure pegs are not used on the element areas of the heated
throw if hanging on the line.
• Note: The heated throw must be thoroughly dried including
controller sockets before being re-fitted to your bed.
• Do not wring the blanket. Do not spin dry.
Storage
• When not in use, store the heated throw by allowing it to cool
down before folding. Fold neatly (or rolled) but not tightly
without sharp bends in the heating elements and store where
no other heavy objects will be placed upon it.
• Store in a dry place where it cannot be damaged.
CLEANING & CARE

14
WARRANTY
Please refer to the warranty card in the box for warranty information.
For any troubleshooting advice, please contact the relative Customer
Care Centre below.
Glen Dimplex Australia Pty Ltd Glen Dimplex New Zealand Ltd
8 Lakeview Drive, 38 Harris Road, East Tamaki,
Scoresby 3179, Victoria Auckland 2013
Australia New Zealand
Ph: 1300 556 816 Ph: 0800 666 2824
MAINTENANCE
If the unit fails to operate efficiently, is broken or other problems
arise, unplug and do not operate.
Ask for advice by calling your local after sales service agent or
the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824
(NZ).

15
NOTES

Glen Dimplex Australia Pty Ltd
8 Lakeview Drive
Scoresby VIC 3179
Phone: [phone]
Email: [email protected]
Web: www.morphyrichards.com.au
Recycling: Do not dispose of electrical appliances
as unsorted municipal waste. Use separate
collection facilities. Contact your local government
for information regarding the collection systems
available. If electrical appliances are disposed
of in landfills or dumps, hazardous substances
can leak into the ground water, polluting the food
chain and damaging health and wellbeing.
© Glen Dimplex Australia. All rights reserved. Material contained in this publication may not be reproduced in
whole or in part, without prior permission in writing of Glen Dimplex Australia.
MRFHT16_IM_v2