Morphy Richards Cordless hand blender User manual

5www.morphyrichards.com
cubes with the blender using a
plunging action until the ice
cubes are fine ice.
Top tips
• When processing foods with
strong colour (eg. carrots) the
plastic parts of the appliance
may become discoloured. Wipe
with cooking oil to clean any
discoloured parts.
• For blending, select a slow
speed for soft ingredients,
increase the speed to produce
the consistency required.
• Select a high speed for
blending hard ingredients.
• When blending, start the
process by plunging the
blender into the ingredients.
This will ensure all the
ingredients are pulled into the
blade to be processed.
Continue this movement until
the mixture is to the desired
consistency.
• Do not lift the blender head out
of the mixture as splashing may
occur.
Cleaning
WARNING: Always unplug
the unit from the mains
before cleaning.
WARNING: Handle the
blades with care as they are
sharp.
Clean the main housing with a
damp cloth and dry all the
parts thoroughly.
WARNING: Never immerse
main housing in water or
any other liquid.
Trouble shooting
Check the plug is in the socket
and the switch is in the ‘on’
position.
Is the plug itself or the socket
faulty? Check this by plugging
in another appliance.
•Appliance gets very hot.
Blender has been used
continuously for too long.
Leave the appliance to cool.
• Appliance not working.
The removable blender leg has
not been fitted correctly.
Detach the attachment and
replace as described in
‘Assembling the blender leg’.
Wall mounting
bracket
The hand blender can be wall
mounted for convenient
storage C.
Do not mount the storage
bracket/unit over or near any
portion of a heating or cooking
appliance or sink or basin.
WARNING: Always ensure
you are not drilling into the
wall adjacent to any
electrical wires or pipes
such as water or gas.
1Find a suitable position on the
wall or cupboard where the
blender is to be positioned.
2Mark the fixing points through
the bracket.
3If you are fixing to a solid brick
or block wall use a suitable size
masonary drill and drill to a
depth of 25mm.
4If fixing to a wood or cupboard
surface, drill a 2mm pilot hole
or use a bradawl.
Dedicated helpline
If you have any difficulty with
your appliance, do not hesitate
to call. We are more likely to be
able to help than the store from
where you bought it.
Please have the following
information ready to enable our
staff to deal with your enquiry
quickly:
• Name of the product
• Model number as shown on the
underside of the appliance or
rating plate
• Serial number
UK Helpline 0870 060 2609
Replacement Parts 0870 167 6640
Ireland Helpline 1800 409119
1
C
48959 Rev1 25/5/06 13:35 Page 1

www.morphyrichards.com
6
YOUR FIVE YEAR
GUARANTEE
Available on registration
This 5 year
guarantee is only
valid when registered
directly with Morphy
Richards. If you do not
register your product it is
guaranteed for 2 years.
To validate your 5 year
guarantee, telephone our
consumer helpline.
Once you have registered
your product you will
receive written
confirmation from Morphy
Richards, please retain this
information.
Please refer to your 2 year
guarantee for more details.
YOUR TWO YEAR
GUARANTEE
It is important to
retain the retailers
receipt as proof of
purchase. Staple your
receipt to this back cover
for future reference.
Please quote the following
information if the product
develops a fault. These
numbers can be found on
the base of the product.
Model no. Serial no.
All Morphy Richards
products are individually
tested before leaving the
factory. In the unlikely
event of any appliance
proving to be faulty within
28 days of purchase it
should be returned to the
place of purchase for it to
be replaced.
If the fault develops after
28 days and within the
guaratee period from the
original purchase date, you
should contact the Helpline
number quoting Model
number and Serial number
on the product, or write to
Morphy Richards at the
address shown. You will be
asked to return the product
(in secure, adequate
packaging) to the address
below along with a copy of
proof of purchase.
Subject to the exclusions
set out below (see
Exclusions) the faulty
appliance will then be
repaired or replaced and
dispatched usually within 7
working days of receipt.
If for any reason this item
is replaced during the
guarantee period, the
guarantee on the new item
will be calculated from
original purchase date.
Therefore it is vital to retain
your original till receipt or
invoice to indicate the date
of initial purchase.
To qualify for the guarantee
the appliance must have
been used according to
the instructions supplied.
EXCLUSIONS
Morphy Richards shall not
be liable to replace or
repair the goods under the
terms of the guarantee
where:
1The fault has been caused
or is attributable to
accidental use, misuse,
negligent use or used
contrary to the
manufacturers
recommendations or where
the fault has been caused
by power surges or
damage caused in transit.
2The appliance has been
used on a voltage supply
other than that stamped on
the product.
3Repairs have been
attempted by persons
other than our service staff
(or authorised dealer).
4Where the appliance has
been used for hire
purposes or non domestic
use.
5Morphy Richards are not
liable to carry out any type
of servicing work, under
the guarantee.
This guarantee does not
confer any rights other
than those expressly set
out above and does not
cover any claims for
consequential loss or
damage. This guarantee is
offered as an additional
benefit and does not affect
your statutory rights as a
consumer.
• This guarantee is valid in
the UK and Ireland only.
Morphy Richards products are intended for household use only.
Morphy Richards has a policy of continuous improvement in product quality and
design. The company, therefore reserves the right to change the specification of its
models at any time.
The After Sales Division
Morphy Richards Ltd
Mexborough, South Yorkshire,
England, S64 8AJ
Helpline (Office hours)
UK 0870 060 2609
Republic of Ireland 1800 409119
FP48959MUK Rev 1 05/06
For electrical products sold within the
European Community. At the end of the
electrical products useful life it should
not be disposed of with household
waste. Please recycle where facilities
exist. Check with your Local Authority or
retailer for recycling advice in your
country.
48959 Rev1 25/5/06 13:35 Page 2

HHaannddbblleennddeerr
Please read and keep these instructions
Getting the best from your new
appliance...
SSaaffeettyy
Take care when handling blades they are very sharp.
OOppeerraattiioonn
The hand blender is designed for intermittent use. Do not use
non stop for more than 1 minute at a time. Allow to cool down
for a minimum of 5 minutes before further use.
www.morphyrichards.com
For replacement parts, help with using your Morphy Richards products,
problems and lots more, contact us by phone or through our website.
UK Helpline: 0870 060 2609
Replacement parts: 0870 167 6640
Ireland 1800 409119
To register for your 5 year guarantee ring the Helpline
numbers below.
Please have the following information available:
Serial number: and model number: 48959
(see page 6 for guarantee details)
48959 Rev1 25/5/06 13:35 Page 3

www.morphyrichards.com
2www.morphyrichards.com
CONTENTS
Important safety instructions 3
Electrical requirements 3
Features 4
Unpacking your hand blender 4
Assembling the blender leg 4
Using the hand blender 4
Using for Ice crushing 4
Top tips 5
Cleaning 5
Trouble shooting 5
Wall mounting bracket 5
Dedicated helpline 5
Your guarantee 6
48959 Rev1 25/5/06 13:35 Page 4

www.morphyrichards.com
3
IMPORTANT
SAFETY
INSTRUCTIONS
The use of any electrical
appliance requires the
following of basic common
sense safety rules.
Primarily there is danger of
injury or death and
secondly the danger of
damage to the appliance.
These are indicated in the
text by the following two
conventions:
WARNING: Danger to
the person!
IMPORTANT: Damage to
the appliance!
In addition we offer the
following essential safety
advice.
Location
• Remove all packaging and
retain for future reference.
• Ensure the appliance is
used on a firm, flat surface.
• Do not use the appliance
outdoors or in a bathroom.
• Do not place the appliance
on a highly polished
wooden surface as
damage may occur to the
surface.
• Do not place the appliance
on or near a hot surface
such as a hot plate or
radiant rings or near a
naked flame.
• Do not let the mains lead
overhang the edge of the
table or work-top, or touch
hot surfaces.
Children
• Children do not understand
the dangers associated
with operating electrical
appliances. Never allow
children to use this
appliance.
Personal safety
• Avoid touching moving
parts. Keep hands, hair,
clothing as well as spatula
and other utensils away
from chopper blades
during operation, to
prevent personal injury
and/or damage to the
appliance.
•WARNING: To protect
against risk of
electric shock NEVER
immerse the
appliance body in
water or in any other
liquid and always
ensure the electrical
connections are kept
dry.
Other safety
considerations
• Always disconnect the
blender from the supply. If
it is left unattended and
before assembling,
dissembling or cleaning.
• Never pull on the cord to
unplug the appliance.
• Do not operate any
appliance with a damaged
cord or plug or after the
appliance malfunctions or
has been damaged in any
manner.
• The power cord cannot be
replaced. Contact Morphy
Richards for advice.
• The use of attachments or
tools not recommended or
sold by Morphy Richards
may cause fire, electric
shock or injury.
• Do not use the appliance
for other than its intended
use.
Product specific
safety
• WARNING: The
blender blades are
very sharp. Handle
with care when using
and cleaning.
ELECTRICAL
REQUIREMENTS
Check that the voltage on
the rating plate of your
appliance corresponds
with your house electricity
supply which must be A.C.
(Alternating Current).
If the socket outlets in your
home are not suitable for
the plug supplied with this
appliance, the plug should
be removed and the
appropriate one fitted.
WARNING: The plug
removed from the
mains lead, if
severed, must be
destroyed as a plug
with bared flexible
cord is hazardous if
engaged into a live
socket outlet.
Should the fuse in the
13amp plug require
replacement, a 3 amp
BS1362 fuse must be
fitted.
This appliance does not
need to be earthed, as it is
a double insulated product.
48959 Rev1 25/5/06 13:35 Page 5

¤
‹
›‡
·
‚
fi
⁄
fl
4www.morphyrichards.com
Assembling the
blender leg
Insert by pushing the blender
leg into the blender body, until it
clicks into place.
To remove the blender leg press
the release button.
Using the hand
blender
WARNING: Make sure that
the hand blender is
switched off and unplugged
from the mains.
1Clean the blender leg before
using it for the first time with a
damp cloth.
2Insert the blender leg into the
main housing and click into
place A.
3The hand blender can now be
plugged in and is ready to use.
4Place the blender leg into the
food to blend, select the
required speed for your food on
the speed control, then press
the on/off button B.
Release the on/off to stop
blending.
5After use, unplug the blender
and remove the blender leg by
pressing the release button and
pull gently away.
6Give the blender leg a rinse with
cold water. If the main body has
been splashed just give it a
wipe with a damp cloth.
WARNING: Your hand
blender is designed for
intermittent use. Do not use
non-stop for more than 1
minute. Allow to cool down
for a minimum of 5 minutes
before further use.
Using for Ice
crushing
The blender leg is fitted with a
special blade suitable for
crushing ice. It can be used to
crush ice cubes to produce fine
ice for cocktails, cold drinks
etc.
1Place a maximum of 4 ice
cubes in the plastic measuring
beaker.
2Press firmly down on the ice
Your hand blender is designed to help you prepare
everything from soups to chocolate mousse and
crush ice quickly.
The hand blender can be used with the measuring
jug or a saucepan.
A
B
Features
⁄Blender leg
¤Release button
‹Blender body
›Turbo switch
fiOn/off switch
flSpeed control
‡Wall mounting bracket
· Wall mounting screw and
wall plug x2
‚Measuring jug with storage
lid
Unpacking your hand
blender
WARNING: Carefully unpack
your hand blender, blades
are very sharp.
Wash all parts, with the
exception of the blender body,
before first use. See cleaning
instructions page 5.
48959 Rev1 25/5/06 13:35 Page 6