MOSA Weld NEW MAGIC WELD User manual

1SM 07.1
SERVICE MANUAL
SM 07.1
Codice
Code
1
Edizione
Edition
DATE•Motosaldatrici
•Engine driven welders
ENGINE DRIVEN WELDER SERVICE MANUAL
WITH ELECTRONIC REGULATION OF WELDING PROCESSES
AND CHOPPER BRIDGE
(engine troubleshooting and technical data dedicated to
HONDA GX 200/270 – YANMAR L70N) 06/2015
NEW MAGIC WELD
MAGIC WELD 200
MAGIC WELD YD/YDE

2
INDEX
1 INTRODUCTION
2 ELECTRICAL DIAGRAMS
2.1 - Diagram for magic weld.
2.2 - Diagram for magic weld 200.
2.3 - Diagram for magic weld YD-YDE.
3 MAINTENANCE
3.1 - Maintenance schedule for machines with Honda GX 200-270.
3.2 - Disassembly procedures for normal maintenance.
3.3 - Maintenance schedule for machines with Yanmar L70N.
3.4 - Disassembly procedures for normal maintenance.
4 TROUBLE- SHOOTING
4.1 - Trouble shooting Engine.
4.1.1 - Trouble shooting only for engine Honda GX 200/270.
4.1.2 - Trouble shooting only for engine Yanmar L70N.
4.2 - Trouble shooting Welding.
4.3 - Trouble shooting Wending and auxliary.
5 TECHNICAL DATA
5.1 - Technical data for Magic Weld.
5.2 - Technical data for Magic Weld 200.
5.3 - Technical data for Magic Weld 200 YD-YDE.
Service Manual MAGIC WELD
SM 07.1

3
1 INTRODUCTION
Service Manual MAGIC WELD
This service manual covers products assembled by MOSA – Division of BCS S.p.A.
The information contained within this manual is the exclusive property of MOSA – Division of BCS S.p.A.
As such, no reproduction or replication in whole or in part is prohibited without the written permission of
MOSA – Division of BCS S.p.A.
This manual was written by the manufacturer to provide technical and operational requirements for the only
authorized service centers to carry out assembly, disassembly, revision, replacement, set-up and
adjustments, of its products.
Before anyone will perform a service work on MOSA products, make sure the operator will read carefully the
service manual.
For more information on the engine, alternator, and accessories refer to the user's manual of the
manufacturer that comes with the product.
Time spent reading this information will help prevent risks to health and safety and financial damage.
Written information is accompanied by illustrations to facilitate the understanding of each phase of the
operating steps.
SM 07.1

4
2 ELECTRICAL DIAGRAM
Service Manual MAGIC WELD
SM 07.1

5
Service Manual MAGIC WELD
SM 07.1

6
Service Manual MAGIC WELD
SM 07.1

7
2 ELECTRICAL DIAGRAMS
Service Manual MAGIC WELD
2.1 – Diagram for magic weld.
SM 07.1

8
Service Manual MAGIC WELD
SM 07.1

9
Service Manual MAGIC WELD
2 ELECTRICAL DIAGRAMS
2.2 – Diagram for magic weld 200.
SM 07.1

10
Service Manual MAGIC WELD
SM 07.1

11
Service Manual MAGIC WELD
2 ELECTRICAL DIAGRAMS
2.3 – Diagram for magic weld YD-YDE.
SM 07.1

12
Service Manual MAGIC WELD
SM 07.1

13
Service Manual MAGIC WELD
3 MAINTENANCE
3.1 - Maintenance schedule for machines with engine Honda GX 200 – 270.
SM 07.1

14
3.2.1. Oil level check
Service Manual MAGIC WELD
3.2 Disassembly procedures for normal maintenance GX 200-270.
SM 07.1

15
3.2.2. Oil change.
Service Manual MAGIC WELD
SM 07.1

16
3.2.3. Air cleaner.
Service Manual MAGIC WELD
SM 07.1

17
Service Manual MAGIC WELD
3.2.4. Spark plug.
SM 07.1

18
Service Manual MAGIC WELD
3.3 - Maintenance schedule for machines with engine Yanmar L70N.
SM 07.1

19
3.4 -Disassembly procedures for normal maintenance L70N.
Service Manual MAGIC WELD
3.4.1 – Air cleaner.
SM 07.1

20
3.4.2 – Oil filter.
Service Manual MAGIC WELD
SM 07.1