Mosaic FSMVPT 2067 Owner's manual

Fleur De Lis Swing
FSMVPT 2067
Customer Service: [phone], 7: am to 12: am Everyday CST
Live Chat @ Academy.com: 24/7
Made in China
Please keep this instruction manual for future reference
Assembly Instructions
& User’s Manual
Brand Logo

Table of Contents
Page 1 of 7
Note: Before beginning assembly of prod ct, make s re
all parts are present. Compare parts with package content
list and hardware contents above. If any part is missing or
damaged do not attempt to assemble the nit. Contact
c stomer service for replacement parts.
Warnings………………………………………………………………..…2
Tools and Parts…………………………………………………………...2
Assembly Instr ctions…………………………………………………....4
Care and Maintenance……………………………………………...……6
Warranty Information………………………………………....................7

Warnings
Page 2 of 7
This prod ct req ires ad lt assembly. Keep screws and parts away from children.
Please read this man al before assembly or se.
Do not tighten n ts or screws ntil assembly is complete.
Before assembly, check the package contents caref lly to ens re that all part are incl ded.
For missing or replacement parts, contact c stomer service at [phone].
SKU#: 102634258 Style#: FSMVPT2067
NOTE: Mo nting hardware not incl ded
Hardware req ired to hang swing is not incl ded and is the sole responsibility of the
p rchaser, the man fact rer ass mes no responsibility for improper mo nting hardware
being sed.
1 M6 Wrench
2 M10 Wrench
3 Allen Wrench
Tools Required (Included)
Parts List
A Left Arm 1
B Right Arm 1
C Seat 1
D Back 1

Hardware
E M6 x 70mm Bolt 2
F M6 x 50mm Bolt 4
G M10 x 53mm Bolt 2
H M10 x 73mm Bolt 2
I M6 N t 6
J M10 N t 4
K N t Cap 6
L M6 Washer 6
M M10 Washer 4
Q Chain ( incl ding clips) 2
Page 3 of 7

Assembly Instructions
Step 1:
Attach swing back (D) to left arm (A)
and right arm (B) at position 1 & 2,
sing bolt 2X(H), M10 washer 2X(M)
and M10 n t 2X(J).
Attach the swing back (D) to left arm (A)
and right arm (B) at position 3 & 4,
sing bolt (E), M6 washer (L) and M6
n t (I).
Hand tighten only.
Step 2:
Attach seat (C) to left arm (A) and right
arm (B) at position 1 & 2, sing bolts
2X(F), M6 washers 4X(L), M6 n ts
4X(I).
Hand tighten only.
Page 4 of 7

Assembly Instructions
Step 3:
Attach bolts 2X(G), M10 washers
2X(M) and M10 N ts 2X(J) to the left
arm (A) and right arm (B) as shown.
Hand tighten only.
Step 4:
Make s re the swing stands level and
straight (90) on the floor.
Tighten all n ts and bolts sing
wrench(N & O) and Allen wrench (P).
Cover all M6 n ts by n t caps 6X(K).
Attach chain clip 4X(Q) to left arm (A)
and right arm (B) as shown.
The swing is now ready to be h ng.
Cons lt yo r local hardware store for
proper hanging hardware.
Page 5 of 7

Care and Maintenance
Page 6 of 7
This swing sho ld be cleaned on a reg lar basis to promote safe se and prolong prod ct life.
To clean, wipe the frame with a smooth damp cloth and air dry.
Do not se abrasive cleaners as they may damage or scratch the s rface paint.
Do not leave this prod ct in harsh weather conditions for extended periods.
For extended prod ct life, the swing sho ld be stored indoors or covered d ring prolonged periods
of non- se.
Storing in a dry location will help prevent r st.

Warranty Information
Page 7 of 7
The appliance has been man fact red nder the highest
standards of q ality and workmanship. We warrant to the
original cons mer p rchaser that all aspects of this prod ct will
be free of defects in material and workmanship for one year
from the date of p rchase. A replacement for any defective
part will be s pplied free of charge for installation by the
cons mer. Defects or damage ca sed by the se of other then
gen ine parts are not covered by this warranty. This warranty
shall be effective from the date of p rchase as shown in the
p rchaser receipt.
This warranty is valid for the original cons mer p rchaser only
and excl des ind strial, commercial or b siness se of the
prod ct, prod ct damage d e to shipment or fail re which
res lts from alteration, prod ct ab se, or prod ct mis se,
whether performed by a contractor , service company , or
cons mer. We will not be responsible for labor charges and/or
damage inc rred in installation, repair or replacement nor for
incidental or conseq ential damage.