Mosquito Magnet INDEPENDENCE User manual

INDEPENDENCE
Operation Manual
Advanced Mosquito Defense Systems
For Outdoor Use Only
1440-630

Welcome
Congratulations on your purchase of Mosquito Magnet® . Now you can begin to enjoy your outdoor living space again.
Mosquito Magnet
®
is the #1 mosquito trap in North America. Backed by 18 years of research and independent
testing, Mosquito Magnet
®
is scientically proven to effectively reduce mosquitoes & other biting insects from
your yard.
Mosquito Magnet
®
is easy to use. The link www.mosquitomagnet.com/videos, provides key information for
getting started. In this manual, you’ll learn everything you need to know about how it works, optimal trap
placement, maintenance, storage and warranty information. The keys to success are trap placement, utilization
of the correct attractant for your area and routine maintenance. For optimal catch rate, you’ll need to change the
propane tank and attractant every 21 days.
Our Customer Care line is available to answer all your questions regarding your new purchase.
Please feel free to contact us…
Customer Care: 1-800-953-5737
Visit us online at www.mosquitomagnet.com for additional information regarding Mosquito Magnet
®
tips,
testimonials, and additional product offerings.
Woodstream® Corporation
69 North Locust Street
Lititz, PA 17543
1-800-953-5737
www.mosquitomagnet.com
The Mosquito Magnet® traps are covered by one or
more of the following patents:
USA Nos. 5,813,166; 6,145,243; 6,286,249; 6,817,140;
6,840,005; 6,848,466; 6,892,492; 7,074,830; 7,243,458;
7,281,351; 7,293,387; 7,536,824; 7,614,180; 7,752,803;
7,987,631; 8,067,469; 8,051,601 and 8,141,291
Other patents pending
Made in China
1
FOR YOUR SAFETY
If you smell gas:
1. Shut off the gas to the appliance.
2. Extinguish any open ame.
3. Open lid.
4. If odor continues, immediately call your
gas supplier or your re department.
FOR YOUR SAFETY
1. Do not store or use gasoline or other
ammable vapors and liquids in the
vicinity of this or any other appliance.
2. An LP cylinder not connected for use
shall not be stored in the vicinity of this
or any other appliance.

Contents
2
Welcome/Contents 1-2
Safety Instructions 3-4
Principal Parts 5
Assembly Instructions 6
Set-Up 7-9
Bug Bag Installation
Charging Instructions
Trap Placement
Propane Tank Installation
Octenol Attractant Installation
Instructions 10
Starting Instructions
Shut Down Instructions
When Not In Use
End of Season Storage
For Best Results
Maintenance 11
Maintenance
Propane Tank Changing Tips
Maintenance Schedule
Troubleshooting 12
Limited Warrenty 13
Questions or Comments
Please contact Woodstream®Corporation if you
have any questions or experience any problems
with your Mosquito Magnet®:
1-800-953-5737
Woodstream®Corporation
69 North Locust Street
Lititz, PA 17543
www.mosquitomagnet.com
Patented Counterow Technology™
How the Mosquito Magnet
®
Works
Mosquitoes and other biting insects use the long-range
attractant carbon dioxide (CO2) to locate people. Once in
close proximity, mosquitoes use short-range attractants
such as scents emitted from the skin, to determine which
person they are going to bite. The Mosquito Magnet
®
mimics a human by converting propane to CO2, with its
patented catalytic conversion technology, in combination
with a short-range attractant.
Attracted by the CO2and short-range attractant,
mosquitoes and other biting insects are drawn to
the Mosquito Magnet
®
. When they reach the trap,
the insects are vacuumed into a bug bag by our
patented Counterow Technology™, where they
dehydrate and die within 24 hours.
The Mosquito Magnet
®
is silent, odorless and runs 24/7.
When properly placed in your yard, the trap begins
working immediately. Noticeable results can be
achieved in 7 to 10 days. To greatly reduce your biting
insect population, allow 4 weeks. Leave the Mosquito
Magnet
®
out all summer long, to control the mosquito
population in your yard.
Only biting insects are targeted including mosquitoes,
no-see-ums, black ies and midges. Benecial insects
such as butteries, bees or moths are not targeted.
Model No.:
Serial No.:
Type of Gas:
Manifold Pressure:
Minimum Gas
Supply Pressure:
Input Rating:
Minimum Clearances:
Independence™
Propane
100 – 110 psi
11.0 in. WC
759 Btu/Hr.
20 – 24”

3
Safety Instructions
Please read and follow all safety
instructions and warnings.
Children and adults should be alerted to
the hazards of high surface temperatures
and should stay away to avoid burns or
clothing ignition.
Note: Some or all of the following required safety
instructions for propane powered devices may
apply to your trap. Allow trap to cool for 5 minutes
before re-starting.
Warning: Improper installation, adjustment,
alteration, service or maintenance can cause injury
or property damage. Read the installation, operating
and maintenance instructions thoroughly before
installing or servicing the trap.
Caution: The gas pressure regulator provided with this
appliance must be used. This regulator is set for an outlet
pressure of 11.0 in. Water Column. The minimum inlet gas
supply pressure is 11.0 in. Water Column from regulator.
• This unit is not intended to be installed in or on recreational
vehicles and/or boats.
• The gas supply must be turned off at the LP-Gas supply
cylinder when this appliance is not in use.
• The installation must conform with local codes or, in the
absence of local codes, with the National Fuel Gas Code,
ANSI Z223. 1-1998 for US and with the CAN1-B149 for Canada.
• To test for a gas leak, place soapy water around the
connector, regulator, and gas hose assembly. If bubbles
appear, there is a gas leak.
• Inspect the hose before each use of the unit. If it is evident there
is excessive abrasion or wear, or the hose is cut, it must be
replaced prior to the unit being put into operation. The
replacement hose shall be that specied by the manufacturer.
• The trap is equipped with an internal spark ignition device. Failure
to follow starting procedure will result in the trap not starting.
• Installation and repair should be done by a qualied service
person (nd service centers on www.mosquitomagnet.com).
The heater should be inspected before use and at least
annually by a qualied service person. More frequent
cleaning may be required as necessary. It is imperative that
the control compartment, burners, and circulating air
passageways of the heater be kept clean.
Young children should be carefully
supervised when they are in the
area of the heater. Keep out of
reach of children.
Clothing or other ammable materials
should not be hung from the heater,
or placed on or near the heater.

4
Safety Instructions
• Maintain adequate clearances of 20”–24” around air
openings into the combustion chamber, clearances from
combustible material, provisions for accessibility and for
combustion and ventilating air supply. Keep the trap area
clear and free from combustible materials, gasoline, and
other ammable vapors and liquids. The appliance is not
to be used in locations where ammable vapor or
explosive dust is likely to exist.
• Do not obstruct the ow of combustion and ventilation air.
• Keep the ventilating openings of the cylinder enclosure
free and clear from debris.
• Clean the trap with a water damp cloth, if necessary.
• A maximum of a 20 lb. LP-Gas cylinder shall be used.
• The LP-Gas cylinder must be provided with a shut-off
valve terminating in an LP-Gas supply cylinder valve
outlet specied for Connection No. 510 in the Standard for
Compressed Gas Cylinder Valve Outlet and Inlet
Connections, ANSI/CGA-V-1-1977.
• The LP-Gas cylinder supply system must be arranged for
vapor withdrawal and the cylinder must include a collar to
protect the cylinder valve.
• The LP-Gas cylinder used shall be constructed and marked
in accordance with the specications for LP-Gas cylinders
of the U.S. Department of Transportation (DOT) or The
National Standard of Canada CAN/CSA-B339.
• The trap shall be used outdoors only in a well ventilated
space and shall not be used in a building, garage, or any
other enclosed area.
• The LP-Gas cylinder must be disconnected and removed
from the appliance, if the appliance is stored indoors.
• LP-Gas cylinders must be stored outdoors in a well-
ventilated area out of reach of children.
• Disconnected cylinders must have threaded valve plugs
tightly installed and must not be stored in a building, garage,
or any other enclosed area.
• The pressure regulator and hose assembly supplied with
this appliance must be used for connection to the LP-Gas
cylinder. Replacement pressure regulators and hose
assemblies must be specied by the manufacturer.
• Avoid improper use of extension cords. Keep connections
away from moisture and avoid damage to the cord.
• If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualied
person in order to avoid hazard.
Please contact Customer Care
if you have any questions at:
1-800-953-5737
or visit www.mosquitomagnet.com
Warning: SHOCK! An electric shock hazard
may exist if water from a garden hose is directed at
the Mosquito Magnet®. Route the power cord in the
safest possible manner to avoid personal injury.

add regulator hose
5
Principle Parts
Self-Contained
Independence™
Parts Included
Regulator Hose (1)
Bug Bag
Mosquito Magnet Octenol
Biting Insect Attractant
EPA Reg. No. 72563-1 (Short-Range Attractant)
Power Head (1)
Trumpet (1)
Support Pole (1)
Base Support (1)
4 “C” Batteries
“C” Size Batteries recommended:
- Micropower
- Panasonic Extreme Power
- Duracell Ultra
- Energizer Ultra +

6
Assembly Instructions
Step 1
Place base upside down on a at surface, unfold
U-shaped support leg until it locks in place.
Step 4
Open battery door in the rear of the trap.
Step 2
Turn base and leg assembly right-side-up and place
support pole into cavity on base.
Step 3
Place trap power head onto pole. Press down rmly
with two hands to secure.
Assembled trap should have the front of power
head/trumpet placed farthest from the wheels in the
same direction as base U-shaped legs.
Step 5
Place four (4) “C” batteries in the battery cage.
Insert battery cage connector in the power
receptacle until it latches, then insert the battery
cage in the opening.
Step 6
Close battery door when complete (snaps into place).
Trap Assembly:

7
Set-Up
Bug Bag Installation:
Reach in the bug bag and fully open the drawstring entrance
before installing. This will help optimize the airow which will
enhance the performance of your trap.
Lift clear plastic lid and lock plastic holding bracket of bug bag
into front of compartment. Close plastic lid when nished.
Note: Fabric loops hook over plastic posts allowing bug bag to
expand to its highest capacity.
Trap Placement
1. Determine the direction of the prevailing wind.
Check local weather patterns if you are unsure.
2. Stand in the center of the area you are trying to protect
and look toward the prevailing wind.
3. Proper placement of the trap will be 30 – 40 feet
in front of you, within 5-6 feet of ground cover (i.e. bushes,
owerbeds, tree line, marshbed). Ensure that trap is not
directly against any blockades such as buildings, fences, etc.
4. It is recommended that the trap be placed in the shade.
5. Do not place trap directly above a water source
(sprinklers, hose, etc.).
6. Trap must be placed on level ground to avoid tipping
or uneven propane distribution.
7. For optimal trap placement in your yard, refer to the
instructional video at www.mosquitomagnet.com/videos to
build your own yard diagram for correct trap placement.
Bug bag locks into front of compartment

8
Set-Up
Propane Tank Installation
1. After trap is placed in its ideal location, place propane
tank onto the molded cradle.
2. Make sure propane tank is fully closed. Attach
propane regulator hose to propane tank. Secure
tightly by hand. Do not use tools.
3. Turn propane on by slowly turning valve counter-clockwise.
Take care not to turn too quickly to avoid engagement of
safety valve.
D O NOT MOVE TRAP WITH TANK ATTACHED!
TANK MUST BE DISCONNECTED FROM REGULATOR
BEFORE TRAP IS RELOCATED TO AVOID DAMAGE TO
REGULATOR AND/OR TRAP. BE ADVISED, DAMAGE
CAUSED FROM FAILURE TO COMPLY WITH THIS
INSTRUCTION IS NOT COVERED UNDER WARRANTY.
Step 1 - Propane Tank Placement
Step 2 - Attach Regulator
Step 3 - Slowly Open Valve

9
Octenol Attractant Installation
1. Locate Mosquito Magnet®Octenol Biting Insect Attractant. Remove
mosquito attractant packet from bag. Carefully peal back foil cover
2. Locate the octenol carrier compartment inside the plume tube.
Turn cap counter-clockwise about 1/8 turn. Remove end cap.
3. Place the open packet of mosquito attractant into the
carrier compartment.
4. Replace end cap on carrier compartment. Be sure to align
cap’s “feet” with grooves inside carrier compartment. Secure
cap by turning clockwise until it clicks (about 1/8 turn).
Precautionary Statements
Hazards to Humans and Domestic Animals.
Caution: Harmful if swallowed. Avoid contact of skin, eyes or mouth
with the evaporation holes. Wash hands before eating, drinking,
chewing gum, using tobacco or using bathroom facilities.
First Aid
If swallowed
• Call poison control center or doctor immediately for treatment advice.
• Have person sip a glass of water if able to swallow.
• Do not induce vomiting unless told to do so by the poison control
center or doctor.
• Do not give anything by mouth to an unconscious person.
If on skin or clothing
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15-20 minutes.
• Call a poison control center or doctor for treatment advice.
If in eyes
• Hold eye open and rinse slowly and gently with water for 15-20 minutes.
• Remove contact lenses, if present, after the rst 5 minutes, then
continue rinsing eye.
• Call a poison control center or doctor for treatment advice.
If inhaled
• Move person to fresh air.
• If person is not breathing, call 911 or an ambulance, then give
articial respiration, preferably by mouth-to-mouth, if possible.
• Call a poison control center or doctor for treatment advice.
Have the product container or label with you when calling a poison
control center or doctor, or going for treatment.
Environmental Hazards: Do not apply directly to water. Do not
contaminate water when disposing of equipment washwaters or rinsate.
Directions for Use
It is a violation of federal law to use this product in a manner
inconsistent with its labeling.
Replace cartridge every 21 days* (Note: After 21 days of use, cartridge appears
the same; however, it will no longer be effective as the octenol will have been released.)
*Based on release rate studies conducted at a constant ambient air temperature
of 80˚ F for 21 days. Octenol release from this product will be more rapid at
higher ambient air temperature.
Storage & Disposal
Do not contaminate water, food or feed by storage or disposal.
Storage: Store unopened attractant cartridge in a cool, dry place.
Discard outer plastic bag in trash.
Disposal: Do not reuse attractant cartridge. Dispose of used
attractant cartridge in the trash.
Step 1
Step 2
Step 3
Step 4
Set-Up