mothercare Shaker User manual

a t h o m e
IMPORTANT. RETAIN FOR
FUTURE REFERENCE -
READ CAREFULLY
‘Shaker’ Style Single Bed
User Guide
Your Child's Safety
Is Your Responsibility
If you have a problem with this product or require replacement parts,
please contact your nearest Mothercare store or telephone the
Mothercare Customer Care Line on
01923 210 210
Alternatively write to:
Mothercare Customer Care
Cherry Tree Road
Watford
Herts. WD2 5SH
Made in England

2. Putting the Bed Together1. Checklist
8 Long Bolts
8 Barrel Nuts
1. 2.
1 head
end
1 set mattress slats
2 Mattress Rails
4 screws
Attach the
mattress rails to
the two ends,
using the 8 long
bolts and barrel
nuts, as shown.
Spread the slats out
evenly between the
mattress rails, and using
the screws, fix through the
4 pre-drilled holes. Initial
pressure may be required
for them to 'bite'.
Periodically check all fittings to ensure that none have come loose.
The bed must be set up on an even and stable surface.
Clean your bed by wiping with a damp cloth & drying with a soft cloth.
Never clean with abrasives, chemical cleaners or household polishes.
Keep away from direct sources of heat, such as electric, gas or coal fires.
Take care when handling or moving the bed. Careless handling can damage wooden furniture.
Bouncing on, or using this bed other than for its intended purpose, could cause damage to the
structure or serious injury to your child.
MATTRESS SIZE: The recommended mattress to be used with this bed should measure 190cm x 74cm (6'3" x 2'6")
3. Care and Safety
1 foot
end