Motic SWIFTLINE SM100 Series User manual

SM100 Series Instruction Manual
WWW.MOTIC.COM
MOTIC HONG KONG LIMITED

2
MOTIC SWIFTLINE SM100 SERIES STEREO MICROSCOPE
The Motic Swiftline SM100 Series stereo microscope is a full size,
well-balanced, stereoscopic instrument producing an erect, three-
dimensional image with a large, comfortable field of view.
The SM100 Series incorporates features to enhance and provide
maximum versatility for classroom and professional use. It is built to
rigid optical and mechanical standards; the result of continuing
progress from Motic Swiftline to provide a durable, modern
instrument that meets today’s stringent requirements.

3
SM100 CORDED SERIES STEREO MICROSCOPE
SPECIFICATIONS
Model Number
SM101
SM102
SM105
Objectives
1X, 3X
2X, 4X
1X –3X ZOOM
Eyepieces
N-WF10X/20
N-WF10X/20
N-WF10X/20
Total
Magnification/
Field of View
10X / 20mm
30X / 6.5mm
10X / 10mm
40X / 5mm
10X / 20mm
20X / 10mm
30X / 6.5mm
Working
Distance
77mm
77mm
77mm
Max Specimen
Height
36mm
36mm
36mm
SM100
Illuminator
(incident &
transmitted)
Turret variable
6 x .06W LED,
Top variable
.5W, Bottom
.5W LED.
Corded Stand
Turret variable
6 x .06W LED,
Top variable
.5W, Bottom
.5W LED.
Corded Stand
Turret variable
6 x .06W LED,
Top variable
.5W, Bottom
.5W LED.
Corded Stand
SM100 CORDLESS SERIES STEREO MICROSCOPE
SPECIFICATIONS
Model Number
SM101-C
SM102-C
SM105-C
Objectives
1X, 3X
2X, 4X
1X –3X ZOOM
Eyepieces
N-WF10X/20
N-WF10X/20
N-WF10X/20
Total
Magnification/
Field of View
10X / 20mm
30X / 6.5mm
10X / 10mm
40X / 5mm
10X / 20mm
20X / 10mm
30X / 6.5mm
Working
Distance
77mm
77mm
77mm
Max Specimen
Height
36mm
36mm
36mm
SM100
Illuminator
(incident &
transmitted)
Turret variable
6 x .06W LED,
Top variable
.5W, Bottom
.5W LED.
Corded Stand
Turret variable
6 x .06W LED,
Top variable
.5W, Bottom
.5W LED.
Corded Stand
Turret variable
6 x .06W LED,
Top variable
.5W, Bottom
.5W LED.
Corded Stand

4
Head
Focusing
Control Knob
Turret
Stage Clips
Stage Plate
(SM105-C Pictured)
Diopter
Adjustment
Bottom
Illuminator
Top Turret &
Angled
Illuminators
Illuminator Dimmer
Control
Illuminator On/Off
Switches
Eyepiece
Eyepiece tube
Diopter Adjustment
Power
Switch
Stand
Cord Holder
Magnification
Knob
USB Port

5
COMPONENTS OF THE STEREO MICROSCOPE
BOTTOM ILLUMINATOR –This is the light source mounted in the base to
provide trans-illumination.
DIOPTER ADJUSTMENT –Located on the left eyepiece tube of the
SM100 Series. This adjustment is used to fine focus the optics to
compensate for visual differences between the user’s eyes.
EYEPIECE –The upper optical element that further magnifies the
primary image of the specimen and brings the light rays in focus at the
eyepoint.
EYEPIECE TUBE –This is the part of the head that holds the eyepieces
in place. Set screws in the eyepiece tubes can be used to lock the
eyepieces in place.
STAGE CLIP –Used to hold specimen in place.
FOCUSING CONTROL KNOB –The focusing control knobs located on
either side of the stand are used to raise or lower the head to bring the
specimen into focus. The control knobs incorporate a slip clutch system
which prevents the head from traveling past both ends of the focusing
range. When the focusing limit is reached, the clutch system begins to
slip to prevent gear damage.
HEAD –The 360˚ rotatable component that contains all of the optical
elements of the stereo microscope including the eyepieces, refracting
mirrors and objective lenses. The head of the SM100 series is designed
to allow users to adjust the interpupillary distance of the eyepieces for
proper viewing.
CAMERA PORT - the top portion of the microscope (M3600 series) is
equipped with an optional camera port. This port allows the end user
to attach a digital camera (such the Moticam 2, X, X2, or BTW8 Tablet),
with the purchase of the optional C-Mount camera lens (MA15604). Ask
your microscope dealer for details. To remove the cap, a 1.5mm hex
wrench is will be required (not provided).
ILLUMINATOR DIMMER CONTROL –The intensity of the top (incident
light) LEDs or bottom (trans-illumination) LED can be adjusted to the
preferred brightness (0 through 10) by using the dimmer control located
on the side of the base.

6
ILLUMINATOR ON/OFF SWITCHES –A tri-illumination system is
incorporated into the stand. The illumination system is controlled by
top (incident light) and bottom (trans-illumination) on/off switches
located at the base of the stand. The incident illuminator is used for
opaque specimens, while the trans-illuminator effectively illuminates
the internal structure of transparent specimens. Translucent
specimens may be seen in greater detail if both illuminators are used
simultaneously.
MAGNIFICATION KNOB –Used to change the SM100 series
magnification settings.
STAGE PLATE –Frosted glass, black and white stage plates are
provided with the microscope stand. The frosted glass stage plate
allows light from the bottom illuminator to pass through. The black
and white stage plates can be used for additional contrast to the
specimen that is being viewed.
STAND –Used to support the stereo microscope head. The height is
adjustable which allows the head to change its focusing range. The
stand also contains the top and bottom Illuminators.
TOP ANGLED ILLUMINATOR –The top .5W LED light source is fixed at
a 45˚ angle.
TOP TURRET ILLUMINATOR –The top 6 x .06W LED light source is
fixed in a downward in a vertical position to provide maximum
illumination of the specimen.
TURRET –The round barrel that houses the objective lenses. The
SM100 Series has magnifications that can be changed by rotating the
black turret magnification knob to a different set of objective
lenses.
USB Port –This port supplies 5VDC 500Ma for optional accessories.
This port can be used to charge MP3 device or add-on USB lighting.
DO NOT USE TO CONNECT USB CAMERA –FOR LOW VOLTAGE
DEVICES ONLY.
OPERATING YOUR SM100 SERIES STEREO MICROSCOPE
1. Place the specimen onto the stage plate and select the type
of illumination. If the specimen is transparent, turn on the bottom
illumination. If the specimen is opaque, turn on the top illuminator.
2. The magnification knob is located on the right hand side of
the microscope head. The knob is clearly marked with the optical
magnification setting. To change magnifications, rotate the black
magnification knob in one direction or in the opposite, as far as it
will turn. This will place one pair of objectives in alignment for

7
viewing. The power that is in use is marked on the black
magnification knob. Please start with the highest objective setting.
3. Look through the eyepieces and rotate the focus control knob to
focus the specimen in the field of view.
4. Grasp the eyepiece tubes and move them either closer together or
farther apart, to change the interpupillary distance to obtain a clear
image. Note, if two separate images are observed, the eyepiece
tubes are too far apart and should be moved together. If two
overlapping images are seen, the eyepiece tubes are too close
together and should be moved apart.
5. Close your left eye and adjust the focus controls so the image is
in sharp focus, while viewing with the right eye only.
6. Close your right eye and while viewing with the left eye
only, adjust the diopter ring on the left eyetube to bring the image
of the specimen into sharp focus. The optical system is now
adjusted to your particular vision.
7. Rotate the black magnification knob to lowest magnification. Only
minor refocusing using the focusing control knob should be required.
Your microscope is now parfocalled.
SERVICE AND CLEANING
Use and store your instrument in a dry environment. When not being
used, microscopes should be stored with dust covers in place and
illuminators turned off. Avoid direct sunlight, high temperatures,
moisture, smoke, and fungus. Your Swift stereo microscope is
designed to function satisfactorily with only ordinary maintenance.
The instrument should be periodically serviced by a qualified,
authorized service technician, who will clean, re-lubricate and
perform routine adjustments. Eyepieces should be cleaned as often
as necessary to allow unobstructed viewing. Clean the eyepieces by
brushing away dust particles using a soft camel hair brush or with air
pressure, then moistening the lens by breathing onto it. Wipe the
lens carefully with quality lens tissue. If dirt or other foreign matter
still remains, it may be necessary to use water or optical cleaner
(eyeglass or camera lens). Note: the lens tissue should be moistened,
not saturated, for cleaning, after which the lens should be dried
using a quality lens tissue. Painted surfaces should be cleaned with
soapy water or mild non-abrasive cleaners and a soft cloth. Do not
use solvents on painted surfaces.
Unauthorized personnel should never disassemble lens assemblies or
other precision components.

8
BULB REPLACEMENT
Unplug the stereo microscope from the electrical outlet and
remove specimens from the stage before you attempt to replace
an LED.
To prolong the life of the LED, you should always turn off the unit
when not in use.
The extra long life LED incidental (top) illuminator bulbs (Swift
MA14780 & MA14781) can be replaced by removing the five retaining
screws holding on the Illumination plate (See Fig 1.). This will
require the use of a short handle screw driver. They can then be
unclipped and replaced (See Fig 2.).
The transmitted (bottom) illumination bulb is Swift MA14782 3.5V
150mA LED Bulb. The bottom bulb may be replaced by carefully
laying your stereoscope on its side and using a Phillips screw driver
remove the four screws securing the rubber feet and base plate to
illuminator base. Remove four 3mm Phillips head screws securing
lamp housing to lamp bracket (See Fig 3.); then remove lamp
housing. Carefully unplug LED lamp connector. Replace LED lamp
assembly and then, reverse the above process.
*Picture in Fig 1 is SM105 series –SM101 and SM102 series do not
have covers*
Fig 1. Fig 2.
Fig 3.

9
TENSION CONTROL OF FOCUSING MOVEMENT
The focus tension is easily adjusted by using the adjustment wrench.
This wrench fits the tension collar found on the focusing controls,
between the knob and upright support. A clockwise turn of this collar
moves it toward the upright support and increases tension, while a
counter clockwise turn moves the collar toward the knob and decreases
tension (see illustration).
ADDING A DIGITAL CAMERA TO TOP CAMERA PORT
The top port of your SM105-T microscope allows the attachment of
a digital camera, such as the Moticam. The purchase of an optional
C-mount camera lens is necessary for the conversion (MA15604). DO
NOT PLUG INTO USB PORT OF MICROSCOPE
1. First take your Moticam camera and remove the dust cap
from the bottom of the camera, being careful not to
introduce dust.
2. Then take the MA15604 C-mount lens and attach it to the
Moticam camera. Then set to the side.
3. Remove the top camera port cover of the microscope, by
loosening the three 1.5mm hex screws. 1.5mm hex
wrench purchased separately.
4. Take the Moticam with attached C-Mount and slide down
into the open top camera port.
5. Tighten the three 1.5mm hex screws back around the C-
mount to secure it in place.
6. Then follow the camera instructions.

10
COMMON PROBLEMS IN MICROSCOPY
If you have a problem, you may be able to correct it yourself. Here
are a few common problems and easy solutions you may want to try
before calling for service.
CAUTION –Never disassemble mechanical or optical components.
This servicing should only be done by an authorized Swift technician.
The Limited Lifetime Warranty will be null and void if the
mechanical or optical components are disassembled by a non-Swift
dealer.
A. PROBLEM –The illuminator light does not come on
CORRECTION –
1. Make sure the microscope is plugged into a functional
electrical socket.
2. Make sure the bottom illuminator dimmer control is set above
“0”
3. The bulb may need to be replaced. See “Bulb replacement”
on page 8.
B. PROBLEM –Unable to bring specimen into focus.
CORRECTION –
1. Eye lens of the eyepiece is partially unscrewed. Remove the
eyepiece and screw the two sections together.
2. The black turret knob may need to be fully rotated to align
the objective lenses into the correct position.
3. The specimen may not be centered properly on the stage and
needs to be re-positioned to be in the optical path.
C. PROBLEM –Image of the specimen goes out of the focus all by
itself.
CORRECTION - Use the tension control collar to tighten the
focusing mechanism found on the focusing spindle.
D. PROBLEM –Focusing knobs turn with difficulty even with tension-
collar loosened.
CORRECTION –Microscope should be disassembled, cleaned and
re-lubricated by a qualified, authorized technician.

11
PARTS and ACCESSORIES
MA10589 N-WF10X/20 (single)
MA10590 N-WF10X/20 adjustable Diopter (single)
MA14780 3.5V 150mA LED Bulb (Top illuminator)
MA14781 3.5V 150mA LED Bulb (Arm illuminator)
MA14782 3.5V 150mA LED Bulb (Bottom illuminator)
MA14281 Power supply converter (100-240VAC in, 4.5VDC 1a out)
MA15604 C-Mount Adapter
MA19029 Rubber Eyeshields, pair
MA2620B Black Stage Plate
MA2620W White Stage Plate
MA2621 Frosted Stage Plate
MA533 Dustcover

12
Motic Hong Kong Limited (HONG KONG)
Unit 2002, L20, TowerTwo, Enterprise Square Five, 38 Wang Chiu Road, Kowloon Bay,
Kowloon, Hong Kong Tel:[phone] Fax: [phone]
Motic Instruments Inc. (CANADA)
130-4611 Viking Way
Richmond, B.C. V6V 2K9
Canada Tel: [phone]
Fax: [phone]
Motic Deutschland GmbH (GERMANY)
Christian-Kremp-Strasse 11, D-
35578 Wetzlar, Germany Tel:
49-6441-210 010 Fax: 49-6441-
210 0122
Motic Europe (SPAIN)
C.LesCorts 12, Pol. Ind. Les Corts. 08349 Cabrera de
Mar, Barcelona, Spain Tel: [phone] Fax 34-93-
756 6287
Motic Hong Kong Limited Copyright © 2010-2017. All Rights Reserved.
Design Change : The manufacturer reserves the right to make changes in instrument design
in accordance with scientific and mechanical progress, without notice and without
obligation.

13