Motionics BDLT-302 User manual

Bluetooth Dial Indicator Lite
BDLT-302 - User Guide
Important Notes
!
NOT
Do NOT open the device. Opening causes permanent damage and voids the
warranty.
BlueDial-LT transmitter & digital indicator should be both on before pairing.
BlueDial-LT operates on two separate batteries:
1) Rechargeable built-in Li-Po battery for the Bluetooth transmitter
2) CR2032 battery for the digital dial
The indicator face is not rotatable. Avoid rotating the dial face.
Description
9
10
11
Origin Button – press to zero dial reading; this can also be done in the App
Unit Button – select reading in inch/mm
Zero/ABS Button – change absolute/increment mode for the dial
Preset Button – preset dial data
Tol Button – make the dial work in tolerance mode
Direction Button – change measurement direction
Dial Battery – insert coin battery CR2032 for the digital dial
Status LED
– Bluetooth transmitter is on
– BlueDial-LT is in charge
– BlueDial-LT is fully charged
Micro USB Port – connect to USB cable to charge BlueDial-LT
1
2
3
4
5
6
8
9
10
7
11
1
2
3
4
5
67
8
Product Page

Included in the box
Quick Start
BDLT-302 1X
USB Charging Cable 1X
USB Power Adapter 1X
User Guide 1X
Insert CR2032 battery to dial indicator if it’s a rst time use.
Turn on BOTH the dial indicator and the Bluetooth transmitter.
Plug in USB Bluetooth dongle if using Windows PC.
Run the software, tap Scan/+ button to enter pairing page.
BlueDialLTXXX
to connect.
Connection may take a few seconds, once paired, BlueDial-LT reading shows
in the software.
iOS: MultiGage Reader (download for FREE from the App Store)
Android: MultiGage Reader (download for FREE from the Play Store)
Windows: MultiGage Reader (BLE dongle required, download for FREE from
www.motionics.com Go to Resources > Download > Software)
MultiGage Reader App
iPhone/iPad MultiGage Reader APP Android
Compatible Software
Motionics, LLC www.motionics.com [email protected]
© 2023 Motionics, LLC All Rights Reserved. Made in the U.S.A.