Motionics WiMER1 User manual

Wireless Measurement Read
WiMER1 - User Guide
Important Notes
!
NOT
Do NOT open the device. Opening causes permanent damage and voids
the warranty.
Description
10-Pin Connector – connects to Mitutoyo Digimatic data cable
Tri-Color LED
– Device is on
– Device is in charge
– Device is fully charged
USB Port – connects to USB cable to charge
Trigger Connector – 2.5 mm audio port, connects to trigger switch
1
2
3
4
5
1
2
3
4
5
Product Page

Included in the box
Quick Start
WiMER1 Base 1X
Trigger Switch 1X
USB Charging Cable 1X
USB Power Adapter 1X
User Guide 1X
Turn on WiMER1 and connect to Mitutoyo instruments.
Plug in USB Bluetooth dongle if using Windows PC.
Run one of the aforementioned apps/software.
In the main page, tap o bring up a new pairing page.
WiMERXXX
to connect.
Connection may take a few seconds, once paired, instrument reading shows in
the software.
Scan/+ button t
iOS: MultiGage Reader (download for FREE from the App Store)
Android: MultiGage Reader (download for FREE from the Play Store)
Windows: MultiGage Reader (BLE dongle required, download for FREE from
www.motionics.com Go to Resources > Download > Software)
MultiGage Reader App
iPhone/iPad MultiGage Reader APP Android
Compatible Software
Motionics, LLC www.motionics.com [email protected]
© 2023 Motionics, LLC All Rights Reserved. Made in the U.S.A.