Motionics BlueDial Flat User manual

Bluetooth Digital Indicator
BlueDial Flat User Guide
Important Notes
Description
NOT
Do NOT open the device. Opening causes permanent damage and voids the
warranty.
Change coin battery when low battery icon shows on indicator display to avoid
false readings
ABS/Preset Button – Short press - switch dial indicator between absolute
measurement mode and relative measurement mode
Unit Button – select reading in inch/mm
Status LED
– Blue LED Flashing – Bluetooth transmitter on, waiting to be connected
– Blue LED Solid – Bluetooth transmitter connected
– Blue LED o – Bluetooth transmitter o
Dial Battery – insert CR2032 battery
1
2
3
1
4
5
!
4
5
– Short press when dial is o - turn on dial indicatorZero/On Button
– Short press when dial is on - zero dial reading
– Long press when dial is on - turn o dial indicator
– Long press - set preset value
1
32

BlueDial Flat 1X
CR2032 Battery1X
User Guide 1X
Included in the box
Compatible Software
Quick Start
Short press Zero/ON button to turn on BlueDial Flat.
Make sure blue LED is ashing.
Once paired, BlueDial Flat readings show in the software.
Motionics, LLC www.motionics.com [email protected]
8500 Shoal Creek Blvd Building 4 Suite 209, Austin, TX, 78757
© 2020 Motionics, LLC. All rights reserved. Made in the U.S.A
iOS: MultiGage Reader
Android: Multigage Reader
iOS app can be directly downloaded from the App Store for FREE.
Android app can be directly downloaded from the Google Play Store for FREE.
Insert CR2032 coin battery into dial indicator if it’s a rst-time use.
Run one of the apps, then tap + button to enter pairing page.
Wait for the software to nish scanning nearby devices, then select
BlueDialFTxxxx to connect.
To turn o BlueDial Flat, long press the Zero/ON button.
Bluetooth transmitter goes to sleep after 3 minutes if there is no connection.
To wake up the Bluetooth transmitter, turn BlueDial Flat o for at least 5 seconds
and then turn it back on.