Motionics BlueDial User manual

Bluetooth Digital Indicator
BlueDial - User Guide
Description
NOT
Do NOT open the device. Opening causes permanent damage and voids the
warranty.
BlueDial transmitter & digital indicator should be both on before pairing.
BlueDial operates on two separate batteries:
1) Rechargeable built-in Li-Po battery for the Bluetooth transmitter
2) Coin SR44 or LR44 battery for the digital dial
Origin Button – press to zero dial reading; this can also be done in the App
Unit Button – select reading in inch/mm
SPC Output – SPC data output port
Dial Battery – insert coin battery SR44 or LR44 for digital dial
Status LED
– Bluetooth transmitter is on
– BlueDial is in charge
– BlueDial is fully charged
Micro USB Port – connect to USB cable to charge BlueDial
1
2
3
4
1 6
5
6
7
8
Important Notes
!
45
7
8
6
32
1
Product Page

BlueDial 1X
USB Charging Cable 1X
USB Power Adapter 1X
User Guide 1X
Included in the box
Quick Start
Plug in USB Bluetooth dongle if using Windows PC.
Run the software, tap Scan/+ button to enter pairing page.
BlueDialXXX
to connect.
Connection may take a few seconds, once paired, BlueDial reading shows
in the software.
Turn on BOTH
Dial indicator Bluetooth transmitter
!
1 6
Motionics, LLC www.motionics.com [email protected]
© 2023 Motionics, LLC All Rights Reserved. Made in the U.S.A.
iOS: MultiGage Reader (download for FREE from the App Store)
Android: MultiGage Reader (download for FREE from the Play Store)
Windows: MultiGage Reader (BLE dongle required, download for FREE from
www.motionics.com Go to Resources > Download > Software)
MultiGage Reader App
iPhone/iPad MultiGage Reader APP Android
Compatible Software