Motorola BLINK1 User manual

USER’S GUIDE
BLINK1 / MBP2000BU / MSC3
BABY MONITOR
USER’S GUIDE
The features described in user's guide are subject to
modifications without prior notice.

This User's Guide provides you with all the information you need
to get the most from your product.
Before you can use the baby monitor, we recommend you insert
and fully charge the battery in the parent unit, so that it continues
to work if you disconnect it from the power supply to carry it to
another location. Please read the Safety Instructions on page 6
before you install the units.
Got everything?
• 1 x Baby Camera Unit
• 1 x Power adaptor for the Baby Camera Unit
Welcome...
to your new Motorola Baby Monitor!
Thank you for purchasing the BLINK1/MBP2000BU/MSC3. Now
you can see and hear your baby sleeping in another room or you
can monitor your older children in their playroom.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide
a copy of your dated sales receipt to confirm warranty status.
Registration is not required for warranty coverage.
For product related questions, please call:
US and Canada 1-888-331-3383
UK 0845 218 0890
On the Web: www.motorola.com

1. Photo Sensor (Night Vision
Mode)
2. Camera Lens
3. Infared LEDs
4. Power LED
5. Microphone
6. Speaker
7. ON/OFF Switch
8. Power Adapter Connector
9. Antenna
10. Temperature Sensor
11. Pair Key
Important guidelines for installing your Baby Monitor
• To use your Video Monitor Baby and Parent Unit together, you must
be able to establish a radio link between them, and the range will be
affected by environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet,
metallic doors or reinforced concrete between the Baby and Parent
Unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like
walls, or by radio or electrical equipment, such as TVs, computers,
cordless or mobile phones, fluorescent lights or dimmer switches.
• Use of other 2.4GHz products, such as wireless networks (WiFi
routers), Bluetooth®systems, or microwave ovens, may cause
interference with this product, so keep the baby monitor away at least
5ft (1m) from these types of products, or turn them off if they appear to
be causing interference.
• If the signal is weak, try moving the Parent and/or the Baby Unit to
different positions in the rooms.
Overview of Your Baby Unit
19
11
10
8
23
6
5
4
7

Table of contents 5
ENGLISH
Table of contents
1. SafetyInstructions..................................................................... 6
2. GettingStart................................................................................ 8
3. OperationMode.......................................................................... 9
4. DirectModeMonitoring.......................................................... 12
5. SetupTheCameraInRouterMode........................................ 16
6. MoreFunctionOfBabyMonitor.............................................. 28
7. DisposalOfTheDevice............................................................ 36
8. Cleaning.................................................................................... 37
9. GeneralInformation................................................................. 39

6 Safety Instructions
1. Safety Instructions
WARNING
This baby monitor is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as described in the User's
Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Keep this user's guide for future reference.
• Do not place the baby unit or cables in the cot / crib or within reach of
the baby (the unit should be at least 3 feet away).
• Keep the cords out of reach of children.
• Do not cover the baby monitor with a towel or blanket.
WARNING:
STRANGULATION HAZARD - Keep the adapter cord out of
baby's reach.
NEVER place camera or cords within the cot / crib.
Secure the cord some distance away from baby's reach.
Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
CAMERA SET UP & USE:
●Determine a location for the CAMERA that will provide the best
view of your baby in his cot / crib.
●Place the CAMERA on a flat surface, such as a dresser, bureau,
or shelf.
●NEVER place camera or cords within cot / crib.
●Secure the cord to the wall to keep cord away from the baby's reach.

Safety Instructions 7
ENGLISH
• Never use extension cords with power adapters. Only use the power
adapters provided.
• Test this monitor and all its functions so that you are familiar with it
prior to actual use.
• Do not use the baby monitor near water.
• Do not install the baby monitor near a heat source.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and
battery pack.
• Do not touch the plug contacts with sharp or metal objects.

8 Getting Started
2. Getting Started
2.1 Baby Unit Power Supply
1. Connect the small plug of the power adapter to the baby unit and the
other end to the electrical outlet.
NOTE
Only use the enclosed power adapter (5.9V DC / 1000mA).
2. Slide the ON/OFF switch to the ON position. The power LED will
light up in green.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.

9
ENLISH
Operation Mode
3.OperationMode
There are three operation modes how the Baby Monitor connected to
and viewed by the Parent Unit.
3.1 LocalMonitoringinDirectConnectMode:
• Auto and Direct connection between Parent and Baby camera unit for
in-house monitoring without the connection to WiFi Router.
• Easy Setup.

10 Operation Mode
3.2 LocalMonitoringinRouterMode:
• Parent and Camera unit are connected via WiFi Router so Parent unit
can access both Camera and Internet at the same time.

11
ENLISH
Operation Mode
3.3 RemoteMonitoringinRouterMode:
• With the IP and Server Control, the user can view the video picture
anywhere from Smartphone (iPhone and Android Phone), Tablet and
PC.

12 Direct Mode Monitoring
4.DirectModeMonitoring
4.1 TurnONthecamerawiththeslideswitch.
The Green LED on the camera front panel will be turned on and start to
blink after 45 sec. After 90 sec, it turns into the Direct Mode and waits
for the Parent handset unit to connect. Then the Green LED will blink
every 2 sec. Duration of blink is 200ms.
If the Camera is already set to Router mode in the past, it needs to reset
to Direct Mode by press-and-hold the RESET button on the bottom
cabinet for 10 seconds until you hear the double beep conrmation tone.
4.2 TurnontheMBP2000Parentunit.IntheHome
 Screen,selecttheAppsBabyMonitor.

13
ENLISH
Direct Mode Monitoring
4.3 ThenyouwillseetheLogin/Registerscreen 
 here.
4.4 Thenyouwillviewalistofcamerawhichis 
 alreadysetinDIRECTmodeandwaitfor 
 connection.
The camera name consists of “Moto-Cam-xxxxxx” where “xxxxxx” is
low 6 nibbles of the MAC address assigned for each camera unit at
the factory. The 2nd line “00:0e:a3:07:0a:08” is the MAC address of the
Camera. This display of MAC address will be removed in nal software.

14 Direct Mode Monitoring
If you cannot see any Camera in the list, press [Back] key back to
Welcome screen and select [Direct Connect] again. Please note the
[ReScan] button doesn’t work at the current software.
If still not found, please check if the Camera is already in Direct Mode
by the Green LED status. If not, reset the Camera to Direct Mode by
press-and-hold the RESET button on the bottom cabinet for 10 seconds
until you hear the double beep conrmation tone. 
4.5 SelecttheCameraandthenyouwillbeprompt
 toentertheCameraPassword.
******

15
ENLISH
Direct Mode Monitoring
4.6 Fortheproductionunit,eachcamerawill 
 bepresetwithanuniquepasswordandwritten
 inthestickeratthebottomcabinet.Inthe 
 currentdevelopmentsoftware,thecamera 
 isnotsetanypasswordsoyoucouldenter 
 anythinglongerthan4characters.Thenselect
 [Next]tocontinue.
4.7 ThenyoushouldseetheCameravideoinafew
 seconds.

16 Setup The Camera In Router Mode
5.SetuptheCameraInRouterMode
In order to have the Internet access and Remote monitoring function, the
user requests to setup the Account and Camera in the Server developed
by Binatone.
5.1 InHomeScreen,selecttheAppsBabyMonitor.
5.2 ThenyouwillseetheWelcomescreenifitis 
 rsttimesetuptheCamera.

17
ENLISH
Setup The Camera In Router Mode
5.3 Ifyoudon’twanttoSetuptheCameratoRouter 
 forLocalandRemotemonitoring,youcould 
 select[DirectConnect]toviewtheCamera 
 video(PleaserefertoSECTION1:DIRECTMODE
 MONITORING).Ifyouwanttocontinuethesetup,
 select[StartSetup],thenthelogin/registerscreen
 isshown.

18 Setup The Camera In Router Mode
5.4 Forthenewuser,youneedtoSelect[Create 
 Account].Otherwiseyoucouldloginthesever 
 withexistingusernamefromStep9.
If the Parent Handset unit hasn’t yet connected to any WiFi Router, it
will prompt the list of available Wireless Network for connection. If it is
already connected to any WiFi network, it will jump to Step 5.8.
5.5 EntertheSecuritykeyoftheselectedWiFi 
 networktomaketheconnection.

19
ENLISH
Setup The Camera In Router Mode
5.6 EntertheUserNamewiththeexistingemail 
 addressandpassword.
5.7 ThenyouwillreceiveanemailwithActivation 
 keyontheusernameemailaddress.Enterthe
 Activationkey.
After pressing [Next] button, you will get the login success in Step 10.

20 Setup The Camera In Router Mode
5.8 PleaseenterUserNameandPasswordandthen
 select[Login]
5.9 Afterloginsuccess,youwillseethe  
 followingscreen,

21
ENLISH
Setup The Camera In Router Mode
5.10 Select[AddCamera]toaddanewCamerato 
 thisAccount.ThenyouwillseeCameraSetup
 screentoremindyoutosettheCamerain 
 DirectModeasdescribedinStep2.
5.11 Select[Next]toviewthelistofcamerareadyto
 add.
Remark : If you cannot see any Camera from the list, select [ReScan] again