Motorola MBP11 User manual

User’s Guide
Digital Audio Baby Monitor
Model: MBP11
The features described in this User’s Guide are subject to modifications without prior notice.

Welcome...
to your new Motorola Digital Audio Baby Monitor!
Thank you for purchasing the MBP11. Now you can hear your baby sleeping
in another room.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide a copy
of your dated sales receipt to confirm warranty status. Registration is not
required for warranty coverage.
For product related questions, please call:
This User's Guide provides you with all the information you need to get the
most from your product.
Before you can use the Digital Audio Baby Monitor, we recommend you
insert and fully charge the battery in the parent unit, so that it continues to
work if you disconnect it from the mains power to carry it to another
location. Please read the Safety Instructions on page 6 before you install
the units.
Got everything?
• 1 x Parent Unit
• 1 x Baby Unit
• 1 x Rechargeable Ni-MH battery pack for the Parent Unit
• 1 x Power adapter for the Parent Unit
• 1 x Power adapter for the Baby Unit
[phone] in Europe
Email: [email protected]

Overview of the Parent Unit
1. Sound Level Indicators
3 GREEN and 2 RED LEDs indicate the
audio level being picked up by the
microphone of the baby unit. The more
LEDs that light up, the louder the sound
is.
If no LED lights up, the sound level in the
baby's room is below the threshold for
the parent unit.
The LEDs are also used when adjusting
the speaker volume setting on the parent
unit, with more LEDs indicating a louder
setting, from 0 to 5.
2. Link Indicator
On when the parent unit is powered on
and linked to the baby unit.
Flashes when the parent unit is out of
range of the baby unit.
3. Power
Press and hold to power on/off the
parent unit.
4. Volume +
Press to increase the speaker volume.
5. Volume -
Press to decrease the speaker volume.
6. Charging Indicator
On steadily when the mains power
adapter is connected.
Flashes when low battery is detected
during battery operation mode.
5
6
4
2
1
3

Overview of Your Baby Unit
1. Power Indicator
On when the baby unit is switched on.
2. Power
Press and hold to power on/off the baby unit.
1
2
Important guidelines for installing your Digital Audio Baby Monitor
• To use your baby unit and parent unit together, you must be able to establish
a radio link between them, and the range will be affected by environmental
conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic
doors or reinforced concrete, between the baby and parent unit may block
the radio signal.
• The signal strength may also be reduced by other solid structures, like walls,
or by radio or electrical equipment, such as TV's, computers, cordless or
mobile phones, fluorescent lights or dimmer switches.
• If the signal is poor, try moving the parent and/or the baby unit to different
positions in the rooms.

Table of contents 5
ENGLISH
Table of contents
1. Safety Instructions..................................................................................... 6
2. Getting Started.......................................................................................... 8
2.1 Baby unit power supply...............................................................................8
2.2 Parent unit battery installation.....................................................................9
2.3 Belt clip on parent unit and baby unit .......................................................10
3. Using Your Digital Audio Baby Monitor.................................................. 11
3.1 Power on/off the parent unit.....................................................................11
3.2 Power on/off the baby unit .......................................................................11
3.3 Adjust speaker volume..............................................................................11
4. Disposal Of The Device (Environment).................................................. 12
5. Cleaning .................................................................................................. 13
6. Troubleshooting ...................................................................................... 14
7. General Information ................................................................................ 16

6Safety Instructions
1. Safety Instructions
This Digital Audio Baby Monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the
User's Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Determine a location for the Digital Audio Baby Monitor that will provide the
best audio reception of your baby in his cot.
• Place the Digital Audio Baby Monitor on a flat surface, such as a dresser,
bureau, or shelf.
• NEVER place the Digital Audio Baby Monitor or its cord within the cot.
• Secure the cord to the wall to keep cord away from the baby's reach.
• Adult assembly is required. Keep small parts away from children when
assembling.
WARNING:
STRANGULATION HAZARD - Keep the Unit and adapter cords more than
1 meter from the cot and out of baby’s reach.
NEVER place Digital Audio Baby Monitor or cords within the cot.
SECURE the cords more than 1 metre away from baby’s reach.
Never use extension cords with AC Adapters. Only use the AC Adapters
provided.
CAMERA SET UP & USE:
●Determine a location for the BABY UNIT that will provide the best view
of your baby in his/her cot.
●Place the BABY UNIT on a flat surface, such as a dresser, bureau, or
shelf or mount the Unit to a wall securely using the keyhole slots under
the stand.
●NEVER place the baby unit or cords within the cot.
●Do not place the Baby Unit or cords in the cot or within reach of the
baby (the unit and cords should be more than 1 meter away).

Safety Instructions 7
ENGLISH
• This product is not a toy. Don't allow children to play with it.
• This Digital Audio Baby Monitor is not a substitute for responsible adult
supervision.
• Keep this User's Guide for future reference.
• Do not cover the Digital Audio Baby Monitor with a towel or blanket.
• Never use extension cords with power adapters. Only use the power
adapters provided.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the Digital Audio Baby Monitor near water.
• Do not install the Digital Audio Baby Monitor near a heat source.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and battery
pack.
• Only insert a battery pack of the same type.
• Do not touch the plug contacts with sharp or metal objects.
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions. Use only a battery pack with rating: 2.4V
400mAh.
Batteries should not be exposed to excessive heat such as bright sunshine or fire.

8Getting Started
2. Getting Started
2.1 Baby unit power supply
1. Insert the small plug of the power adapter into the socket on the side of the
baby unit.
2. Connect the other end of the power adapter to the mains socket.
NOTE
Only use the provided power adapter.
DC JACK
DC PLUG

Getting Started 9
ENGLISH
2.2 Parent unit battery installation
The parent unit comes with a battery pack. Charge the battery in the parent unit
before you use it for the first time or when the parent unit indicates that the
battery is low.
1. Turn the belt clip so that it is in the hanging position.
2. Slide off the battery compartment cover.
3. Insert the wired plug of the supplied battery pack into the small socket as
shown above, and fit the battery pack into the compartment.
4. Replace the battery compartment cover.
5. Insert the small plug of the power adapter into the socket on the side of the
parent unit.
6. Connect the other end of the power adapter to the mains socket.
7. The Charging Indicator comes on.
NOTE
Only use the provided power adapter.
Battery JACK
Battery PLUG

10 Getting Started
2.3 Belt clip on parent unit and baby unit
1. The parent and baby units both have a clip at the back for hanging or
standing the unit.
2. In the normal state, you can use the clip to hang the unit on a belt or other
location. (Note: you should not hang the baby unit on or too near to the
baby.)