Motorola HELLOMOTO SLVR L7 Operation instructions

motorola SLVR with iTunes®
Install Memory Card
Open the memory card
cover.
1
Press the card in until it
clicks into place, then close
the card cover.
2

motorola SLVR with iTunes®
Scroll to Settings,
then press the center
navigation key
2
View Storage Information
Press the Menu key.
1
Scroll to Phone Status,
then press the center
navigation key
3
Scroll to Storage Devices,
then press the center
navigation key
4
Select the desired device,
then press Details.
Tip: Press the Menu key to
format or rename the
memory card.
5

motorola SLVR with iTunes®
Scroll to Multimedia,
then press the center
navigation key
2
View Multimedia
Press the Menu key.
1
Scroll to Sounds, Pictures,
or Videos, then press the
center navigation key.
Here we’ll show you how to
view your pictures.
3
Select a picture and
press View.
Tip: To switch to the
pictures in phone memory,
scroll down to the bottom
of the screen and select
Phone Memory or press
the Menu key and select
Phone Memory.
4

motorola SLVR with iTunes®
Press the Menu key.
1
Transfer Multimedia
Scroll to Settings,
then press the center
navigation key.
2
Scroll to Connection,
then press the center
navigation key.
3
Scroll to USB Settings,
then press the center
navigation key.
4
If the connection is not
already set to Memory
Card, scroll right to
change it.
5
Connect one end of the
Motorola Original
Enhanced USB cable to
your phone and the other
end to a USB port on your
computer.
6
Find where your phone’s memory card
displays as a Removable Disk icon.
On a PC, this is the My Computer window.
On a Mac, it’s on the desktop.
Double click the Removable Disk icon.
7
Drag and drop files between your
computer and the folders on the
memory card use the following folders.
mobile/picture - pictures, wallpaper,
screen savers
mobile/video - video clips
mobile/audio - MP3 files
8
Select USB Mass Storage Device
and OK. Then disconnect the cable.
10
On your phone, scroll
right to set the USB
connection back to
Data/Fax.
11
Before disconnecting the cable:
On a PC, double click the Safely
Remove Hardware icon at the bottom
of your computer screen. Select USB
Mass Storage Device and Stop.
On a Mac, drag the Removable Disk
icon to the trash.
9

motorola SLVR with iTunes®
Take and Send a Picture
Press the Menu key.
Tip: Your phone may have
Camera as the left soft key.
If it does, just press
Camera to go directly to
the camera.
1
Scroll to Multimedia,
then press the center
navigation key.
2
Press the center
navigation key.
3
To view or change where
your pictures will be stored,
press the Menu key and
select Phone Memory or
Memory Card.
4
Scroll up or down to zoom
in or out.
Scroll right or left to make
the picture lighter or darker.
5
Press Capture or the center
navigation key.
6
Enter a message, or just press
Send To to send the picture
without a message.
9
Select the desired option,
then press the center
navigation key.
Here we’ll show you how
to send a picture in a
message.
8
Press Send.
12
Press Store.
7
Select one or more names from
your phonebook. Scroll to the
name, then press the center
navigation key so a checkmark
appears next to the name.
10
Select the name again to
remove it from the message. It
is removed when a checkmark
no longer appears.
11

motorola SLVR with iTunes®
Record a Video
Press the Menu key.
1
Scroll to Multimedia,
then press the center
navigation key.
2
Scroll to Videos,
then press the center
navigation key.
3
To view or change where
your videos will be stored,
press the Menu key and
select Phone Memory or
Memory Card.
4
Scroll up or down to zoom
in or out.
Tip: To view or change
more video options, press
the Menu key and select
Videos Setup.
5
To start recording,
press Capture.
To stop recording,
press Stop.
6
Press Store.
7
Select the desired option,
then press the center
navigation key.
Here we’ll just store the
video.
8

motorola SLVR with iTunes®
Press the Menu key,
then select
Settings
Connection
USB Settings
1
Transfer Music
Scroll right to change
Default Connection to
Memory Card.
2
Connect one end of the
Motorola Original
Enhanced USB cable to
your phone and the other
end to a USB port on your
computer.
4
On your computer, open the
iTunes desktop application.
3
Wait for the phone icon
to appear in the Source
list. This may take up to
one minute.
5
To manually transfer songs, drag
and drop them to the phone icon in
the Source list.
-or-
To transfer a random selection of
songs, select your phone in the
Source list and then click Autofill.
Songs are transferred according to
your settings in the iTunes desktop
application.
Note: Transfer times depend on
the size of the song. It may take
45 seconds (or longer) to transfer a
4MB song.
6
When the transfer is complete,
you will see a message in the
iTunes desktop application and
the Do Not Disconnect message
on the phone disappears.
Click the Eject button next to the
phone icon in the desktop
application and remove the cable.
Do not disconnect the cable until
the transfer is complete.
7

motorola SLVR with iTunes®
Select Songs, then scroll
right. Select a song and
press Play.
Tip: To play all songs in a
list, select Playlist, Artists,
Albums,or Songs then
scroll right. Select All and
press Play.
2
Play Songs
Press the iTunes key.
1
Scroll up or down to adjust
the volume.
Scroll left or right to play
the previous or next song.
Press and hold the left
or right navigation key to
rewind or fast forward the
current song.
3
Use the wired stereo
headset to listen to
music. You cannot listen to
music using a Bluetooth®
headset or while a
Bluetooth headset is
connected to your phone
(turn the headset power
off).
4

motorola SLVR with iTunes®
Add PTT Contact
Press the PTT key.
1
Press the center navigation
key twice.
Tip: To view or change PTT
settings, select PTT Menu >
PTT Settings > Personalize.
2
Enter the name,
then press OK.
3
Enter the number,
then press OK.
4
Press Done.
5

motorola SLVR with iTunes®
Make PTT Call
Press and hold the PTT
key on the side of the
phone. Begin to talk
after the phone emits a
chirping sound.
When you are finished
talking, release the PTT
key.
2
Each time you want to talk,
press the PTT key and talk
after you hear the tone.
Release the PTT key when
you are finished.
Note: Only one person at a
time can talk
3
The connection ends
when no one speaks for 20
seconds or when you press
the End key.
Note: The time interval for
ending the connection may
be different. Contact your
service provider for more
information
4
To send a PTT alert instead
of a standard PTT call,
press the Alert key after
selecting the contact.
The contact’s phone rings
or vibrates, and the
contact can speak first.
If the contact does not
respond, the call ends.
5
Press the PTT key and
select a contact.
-or-
Enter a PTT subscriber’s
phone number.
2

motorola SLVR with iTunes®
Pair Link Headset
Press the Menu key.
1
Scroll to Connection,
then press the center
navigation key.
3
Press the center
navigation key.
4
Scroll to Power, then scroll
right to turn your phone’s
Bluetooth® feature on.
Tip: To extend battery life,
turn Bluetooth power off
when not in use.
6Scroll to Handsfree,
then press the center
navigation key.
9
Press the center
navigation key.
10
Press the center
navigation key.
11
Press Yes.
12
Enter the passkey 0000,
then press Ok.
When pairing is
successful, the light on
the headset changes from
steadily lit to flashing.
13
To confirm your phone and
headset are successfully
paired and operating
properly, put the headset
on and make a call. If your
phone and headset are
successfully paired, you
will hear ringing.
14
Scroll to Settings,
then press the center
navigation key.
2
Press and hold the Call
button on the headset until
the light turns on and
remains steadily lit.
If the light is flashing or does
not remain steadily lit, make
sure the headset is fully
charged and repeat this step.
If you are using a headset
with a folding microphone,
quickly unfold the microphone
so it is fully extended. The
light should remain steadily lit.
7
Scroll to Setup,
then press the center
navigation key.
5
Press Back.
8

motorola SLVR with iTunes®
Autoconnect Headset
Press the Menu key.
1
Scroll to Settings,
then press the center
navigation key.
2
Scroll to Connection,
then press the center
navigation key.
3
Scroll to Device History,
then press the center
navigation key.
5
Scroll to the headset name,
then press the center
navigation key.
6
Press Done.
8
To use your headset, turn
the headset power on (on
headsets with a folding
microphone, unfold the
microphone so it is fully
extended). Your phone will
automatically connect to
the headset.
To disconnect your phone
from the headset, turn the
headset power off (on
headsets with a folding
microphone, close the
microphone).
9
Press the center
navigation key.
4
Scroll to Access,then
scroll right to change
Access setting to
Automatic.
7