Motorola ME7258 Series User manual

User Guide
COLOUR DIGITAL
CORDLESS PHONE
Model ME7258 Series
Digital 1.8 GHz

Welcome
Congratulations on your purchase of a Motorola product!
Your Motorola Telephone at a glance:
1

Welcome
2
For product-related questions, please refer to the Warranty section.
Please retain your original dated sales receipt for your records. For warranty service
of
your Motorola Product, you will need to provide a copy of your dated sales receipt
to confirm warranty status.
Complies with the essential protective requirements and objectives of the EC’s R&TTE
Directive 1999/5/EC; EC Low Voltage Directive 72/23/EEC; EC EMC Directive 89/336/EEC
Copyright © 2007 Motorola, Inc.
All rights reserved. No part of this publication may be reproduced in any form or by
any means or used to make any derivative work (such as translation, transformation
or adaptation) without written permission from Motorola, Inc.
Motorola reserves the right to revise this publication and to make changes in content
from time to time without obligation on the part of Motorola to provide notification of
such revision or change. Motorola provides this guide without warranty of any kind,
either implied or expressed, including but not limited to, the implied warranties of
mer- chantability and fitness for a particular purpose. Motorola may make
improvements or changes in the product(s) described in this manual at anytime.
MOTOROLA, the Stylized M Logo, and PhoneWrap are registered in the U.S. Patent
and Trademark Office. All other product or service names are the property of their
respective owners.

Important Safety Instructions
Important Safety Instructions
Follow these safety precautions when using your cordless phone to reduce the risk of
fire, electric shock and injury to persons or property:
Reduce the risk of fire and shock by:
1. Keep all slits and openings of the phone unblocked. Do not set the phone on a
heating register or over a radiator. Ensure that proper ventilation is provided at
installation site.
2. Do not use while wet or while standing in water.
3. Do not use this product near water (for example, near a bath tub, kitchen sink, or
swimming pool).
4. Do not allow anything to rest on the power cord. Place the power cord so that it
not be walked on.
5. Never insert objects of any kind into the product slits as that may result in fire or
shock.
6. Unplug this product from the wall outlet before cleaning. Do not use liquid
or aerosol cleaners. Use a damp cloth for cleaning.
7. Do not disassemble this product. If service or repair work is required, contact the
Warranty Service phone number found in the back of this user's guide.
8. Do not overload wall outlets and extension cords.
9. Avoid using during an electrical storm. Use a surge protector to protect the
equipment.
10. Do not use this cordless phone to report a gas leak, especially if you are in the
vicinity of the gas leak.
the
will
cleaners
Unplug this cordless phone immediately from an outlet if :
The power cord or plug is damaged or frayed.
Liquid has been spilled into the product.
The product has been exposed to rain or water. Do not retrieve the handset or
until after you have unplugged the power and phone from the wall. Then
the unit by unplugged cords.
The product has been dropped or the cabinet has been damaged.
The product exhibits a distinct change in performance.
base
retrieve
3

Installation Guidelines
1. Read and understand all instructions and save them for future reference.
2. Follow all warnings and instructions marked on the product.
3. Do not install this product near a bath tub, sink or shower.
4. Operate this phone using only the power source that is indicated on the marking
label. If you are unsure of the power supply to your home, consult with your
or local power company.
5. Do not place this product on an unstable trolly, stand or table.This product may
causing serious damage to the product.
6. Adjust only those controls that are covered by the
operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive
work to restore the product to normal operation.
7.
Clean this product with a soft, damp cloth. Do not use chemicals or cleaning agents
to clean this phone.
8. Use only the power supply that came with this unit. Using other power supplied
may damage the unit.
9.
Because cordless phones operate on electricity, you should have at least one phone
in your home that isn't cordless, in case the power in your home goes off.
10. To avoid interference to nearby appliances, do not place the base of the cordless
phone on or near a TV, microwave oven, or VCR.
Technical Amendments
These Operating Instructions are issued for information purposes.
Their content is not subject of a contract.
All indicated data is merely nominal values. The described equipment and options
may differ depending on requirements which are specific to each country.
dealer
fall,
4

Installation
Package Contents Single Pack Twin Pack Triple Pack Quad Pack
Base station 1 1 1 1
Handset 1 2 3 4
Mains Adaptor 1 2 3 4
Telephone Line Cord 1 1 1 1
Rechargeable Batteries 2468
(type AAA rechargeable)
Charger Unit 0 1 2 3
User's Guide 1 1 1 1
Please check the contents of the package carefully. If something is missing
or has become damaged in transit, you should NOT use the telephone.
In such a case you should return to the dealer with your sales receipt or contact the
Motorola's distributor directly. (For details, please refer to the Warranty section.)
Note:Retain the packaging of your appliance to prevent it from being damaged should
you ever need to return it.
Setting up the Base Station and Charger Unit
Place the base station and charger unit in an easily accessible location near to a mains
power socket. Make sure that the location is stable and flat and that the surface is
non-slip. Make sure that all cables can be routed so as to prevent people tripping over
them. Furthermore, avoid placing the base station and charger unit too close to other
electronic appliances such as microwaves, PCs or HiFis, for example.
Do not expose the base station and charger unit to direct sunlight or allow them to
become wet.They should not be set up in rooms which are subject to
condensation or corrosive steam or a high concentration of dust (e.g. cellars,
garages or conservatories).
The room temperature must be between 0 c and 35 c.
Connecting the Base Station and Mains Adaptor
1. Thread the telephone cord and DC power cord
through the gap at the bottom between the base
and stand (as shown).
2. Insert the telephone line cord into the corresponding
socket on the base station.
3. Thread the two cords through the slot at the bottom
of the base.
4. Connect the mains power adaptor to the mains wall
socket and switch the power on.
5. Connect the telephone line cord to the telephone
socket.
The base station is now ready for use.
5

Note: The base station does not have a power switch.
Only use the mains adaptor supplied with your phone.
Connecting the Charger Unit
Plug the mains adaptor into the wall socket .
The charger unit is now ready to use.
Preparing the Handset(s)
Inserting and Charging the Batteries
Open the battery compartment, by pushing downwards on the cover.
Insert the 2 x AAA (600 mAh / 1.2V) Ni-MH re-chargeable
batteries supplied, observing the correct polarity.
If the batteries are inserted incorrectly
the handset will not operate and there is
also a possibility that the handset
may become damaged.
Push the battery cover back on until you hear it click into place.
Place the handset in the base station/charger unit to charge the batteries.
A confirmation beep and the charging indicator confirm that the handset is charging.
Note: Before first use, the batteries should be allowed to charge for at least 16 hours,
without interruption. If possible, only take the handset out of the base station when
charging is complete. This will help to guarantee optimum operation.
Note: To ensure no interruptions during the initial charging period, you may prefer to
connect the telephone line cord after charging so as not to be disturbed by any
incoming calls.
CAUTION : PLEASE DO NOT USE ALKALINE OR NON-
RECHARGEABLE BATTERIES. IT MAY CAUSE PERMANENT
DAMAGE TO THE UNIT. AND VOID THE WARRANTY.
Non rechargeable batteries can explode and cause injuries
and heavy damage on your environment.
LOW BATTERY WARNING
If the handset batteries are low and need charging you will hear a beep every 30
seconds and the icon will be displayed.
6

Attaching a Headset
Note: A headset is not included as standard.You can connect a headset to your
handset.
Lift the small rubber flap on the right side of the handset to reveal the headset
socket. Connect the jack plug into the jack socket.With a headset connected the
handset microphone and receiver
loudspeaker are switched off and all communication
is via the headset
earpiece and mouthpiece.
Technical data
Receiver impedance : 32ohm
Microphone impedance : 2.2K ohm
Receiver output power : 20mW
Plug : 2.5mm headset jack plug
Microphone sensitivity : -42dBV/pa
7

Telephone Features
Congratulations on your purchase of this high quality, cordless telephone set.
The set offers the following features:
Digital Enhanced Cordless
Telecommunication (DECT)
Colour display with icon driven menu
10 incoming call ringing melodies
Phone book for 100 names, each with 3
contact numbers
2 Wallpapers
Handsfree
Caller ID* function with 40 name/number
call log
Operation menu in multi-language
Walkie Talkie Function between Handsets +
20 Last number redial
Clock and alarm
Microphone mute
Low battery and out of range indicators
Keypad lock
GAP compatible - Operation of up to 6
handsets with ME7258 base, use ME7258
handset on up to 4 bases
Teleconference
Call forwarding/transfer
Internal, free communication
between handsets
Emergency call number
9 Speed dial numbers
Separate ringtones for internal/
external/group and page calls
5 Earpiece volume levels
5 Ringer volume levels and ringer mute
5 Base ringtones
Pre-fix dialling
Automatic call answering on/off
Key input tone on/off
Paging function from base station
to handset
Programmable number barring
Up to 100 hours standby
Up to 10 hours continuous talk time
DTMF and pulse dialling modes
+ More than one handset required.
* User must subscribe to service via network provider
DECT : Digitally Enhanced Cordless Telephone - Standard for cordless telephones.
GAP : Generic Access Profile - Standard for the Interoperation of handsets and base stations from other manufacturers.
+
+
+
Features
Phone book group function(6 groups)
2 Games - Snake and Guess Number
Keypad backlight
8

ControlButtons
9
Control Buttons (Handset)
Left Soft Key
Press from standby to view the menu.
Press to select and confirm display
items.
Use to mute/unmute the microphone.
Right Soft Key
Press from standby to access the
Phone Book.
Press to go back to the previous menu.
Press to delete an incorrect character
/digit.
Up Key
Use to scroll up through the menu
/display options.
Shortcut key to access Missed
Calls Log.
Down Key
Use to scroll down through the menu
/display items.
Shortcut key to access Received
Calls Log.
External Call Key
Use to make an external call.
Handsfree/Speaker Key
Use to activate/de-activate handsfree.
R edial/Flash (Recall) Key
Shortcut key to access
Dialled Calls Log.
Flash/Recall - used with some
network services.(e.g., access a
call waiting line)
INT Key
Press to make an intercom call.
Use to put an external call on hold.
*Key
Press to enter an asterisk.
Shortcut key to switch from
Pulse to DTMF dialing mode.
This is only temporary, will
revert back after the call has
ended.
Used to activate Message
Waiting Service in standby mode.
#/K eypad Lock Key
Press to enter a hash.
Shortcut key to lock/unlock the
keypad.
Charge LED
In-use / CID LED: Steady Flash:
OFF-hook / Unread miss call
MIN Key
Press the MIN button as often
as necessary until the required
minute is displayed.
HOUR Key
Press the HOUR button as often
as necessary.
Clock display
Page Key
Press to locate a missing
handset/page all handsets
registered to the base.
Adjust the handset volume.
Adjust the handset volume.
OFF Key
Use to end a call.
Press to return to standby mode.
Press and hold to switch the power
on/off.
Pause/Voice Message Key.
When storing a number, press and
hold to enter a pause.
Shortcut key to activate voice mail
in standby mode.
Control Buttons & Indicators (Base)