Motorola S9-HD - MOTOROKR - Headset User manual

Quick Start Guide
S9-HD
MOTOROKR
TM

1
welcome
The MOTO ROKR ™ S9-HD Wireless Stereo Headphones
take music to the next level, building on the
award-winning Motorola S9 headphones.
MOTO ROKR S9-HD headphones include:
• High definition sound —Powerful SRS WOW
HD surround sound delivers spatial audio and
improved bass for a rich music listening
experience.
• Stable comfort —Stylish, stable, and
lightweight, so your music moves with you
without weighing you down.
• Wireless control —Durable music and call
controls free your hands while working out.
Note: Before using your headphones for the first time,
be sure to review the important safety and legal
pamphlet and follow instructions. Periodically review this
information so you remember how to safely use your
headphones.
For more information about using your S9-HD
headphones, visit
www.motorola.com/S9-HD .

before you begin
2
before you begi n
Take a moment before you get started to familiarize
yourself with the components of your headphones.
[
Track
Back
Button
]
Track
Forward
Button
\
Play/Pause
Button
9
Volume
Button
Ï
Volume
Button
Ñ
Button
Indicator
Light
Charging
Port
(under Ò
flap)
Ö
(Power)
Button
Microphone Speakers

charge your headphones
3
charge your hea dphones
You’ll need to charge your headphone’s battery for a
minimum of 2 hours using the included charger.
Note: You cannot use the headphones while the battery
charges.
1 Lift up Ò rubber flap and plug the charger into the
charging port on your headphones, as shown.
The Charging indicator light turns red or yellow when
battery is charging. It may take up to 1 minute for the
indicator light to turn on. When the headphone’s
battery is fully charged, the indicator light turns green.
2 Disconnect the charger.
Note: Your battery is designed to last the life of your
product. It should only be removed by a recycling facility.
Any attempt to remove or replace your battery will
damage your headset.

turn it on & off
4
turn it on & off
To turn your headphones on , press and hold Ö button
for approximately 3-5 seconds until the indicator light
flashes blue.
To turn your headphones off , press and hold Ö button
for approximately 3-5 seconds until the indicator light
flashes red 3 times.
Ö
(Power)
Button

connect wirelessly
5
connect wi relessly
To listen to your music using a Bluetooth wireless
connection
, as well as make and receive handsfree
calls, you need to pair (link) your headphones with your
Bluetooth phone and/or music player.
1 Turn off any Bluetooth devices previously paired with
your headphones.
2 Turn on the Bluetooth feature on your Bluetooth
phone or music player.
3 Turn on your headphones.
The indicator light is steadily lit in blue to indicate the
headphones are in discoverable mode.
4 Place phone or music player in Bluetooth search
mode.
The phone or music player searches for your
headphones.
5 Select Motorola S9-HD from search results on your
phone or music player.
6 Select OK or Ye s to pair your headphones with your
phone or music player.
7 If prompted, enter 0000 for passkey.

connect wirelessly
6
When your headphones successfully pair and connect
with your phone or music player, the indicator light turns
blue and purple. Music playing from your connected
music source is heard on your headphones.
Notes:
• After successfully pairing your headphones
and Bluetooth device, you don’t need to repeat
these steps. For each use, ensure that your
headphones are turned ON and that your
device’s Bluetooth feature is ON.
• Some music devices will automatically attempt
to play music when the S9-HD re-connects to it.
• For more information on pairing, refer
to your music device manual, or visit
www.motorola.com/S9-HD .
• To stream music, you’ll need a device or adapter
that supports the Bluetooth Advanced Audio
Distribution Profile (A2DP). For help determining
whether your device is A2DP enabled, visit
www.motorola.com/phones/stereo or call
1-877-MOTOBLU.

control your tunes
7
contr ol your tunes
Playback controls on your headphones can be used when
listening to wireless music streaming from a
Bluetooth-enabled music player that also provides
remote control capabilities (AVRCP).
When remote control capabilities are not supported by
your music player, the S9-HD simply acts as headphones,
and music can be controlled from your music player.
Press [ —skip backward
to previous
track
Press ] —skip forward to next track
Press and hold ] —select SRS WOWHD audio mode
Press \ —play/pause music
Press and hold \ —stop music

crank it up
8
crank i t up
To adjust music volume , use the 9 (to increase) and Ï
(to decrease) buttons on your headphones.
You’ll hear a tone when maximum or minimum volume is
reached on your headphones.
Note: The volume setting on your music player may
impact volume on your headphones.
Press 9 —increase volume
Press Ï —decrease volume

handsfree calls
9
handsf ree call s
To make and receive calls using the headphones, you’ll
need to establish a Bluetooth handsfree (HFP)
connection with your phone (see “connect wirelessly”
on page 5 for details).
Use these controls and indicators on your headphones
when making and receiving handsfree calls.
\
Button
9
Button
Ï
Button
Ñ
Button
Indicator
Light

receive a call
10
receive a call
When there’s an incoming call, the indicator light flashes
quickly in blue on your headphones, and you hear a
ring
tone over your headphones. If music is playing when a
call is received, it is automatically paused.
Press Ñ —answer call
Press \ —reject call

while on a call
11
while on a call
When a call is active, the indicator light slowly pulses in
blue on your headphones.
Press Ñ —end call
Press \ —mute/unmute call
Press 9 —increase
call volume
Press Ï —decrease
call volume

while on a call
12
When there’s a second incoming call, the indicator light
flashes quickly in blue on your headphones and you hear
an alert.
Press Ñ —answer second call (first call is placed on hold)
Press \ —reject second incoming call

make a call
13
make a ca ll
Using the headphones to make a call, you can redial the
last dialed number or make a voice dial call (if your phone
supports this feature). When making a voice dial call, the
microphone on the headphones is enabled, and you hear
a prompt from your phone.
Press Ñ —make a voice dial call (you hear a
prompt fromyour phone)
Press and hold Ñ —redial last number

wear your headphones
14
wear your headphones
To wear your headphones, first use both hands to
gently rotate the headphones over your head as shown
below. Then place earhooks over your ears and insert
speakers into your ears for a snug fit.
When fitted properly, the back of your headphones
normally “float” over your neck like shown above.
Your S9-HD headphones come with multiple ear buds.
To replace buds , gently pull existing rubber buds from
the earphone speaker. Attach new buds by wrapping the
base of the bud around the speaker, aligning the notch in
the base of the ear cup with the plastic bump behind the
speaker.

headphones status
15
headphones st atus
indicator light
The indicator light displays current operating status of
headphones, including Bluetooth wireless connection(s)
status to your phone and/or music player.
Indicator Light Headphones Status
three blue flashes powering on (or enabling
indicator light)
steady blue pairing mode
blue with 10 purple
flashes
pairing successful
long blue flash standby (connected to a
device but not on a call or
streaming music)
quick blue flash incoming/outgoing call
long blue pulse connected on a call
long purple pulse connected call muted

headphones status
16
audio tones
The audio tones in your ear speakers provide current
operating status of headphones, including Bluetooth
wireless connection(s) status to your phone and/or music
player.
long green flash music streaming
long red flash idle (not connected to a
device)
quick red flash battery low
three red flashes powering off (or disabling
indicator light)
Audio Tone Headphones Status
double tone when
adjusting volume
maximum or minimum
volume reached
Indicator Light Headphones Status

headphones status
17
tones while adjusting
volume
increasing or decreasing
volume
high tone followed by
low tone (repeated
every 60 seconds)
low battery
no audio indications;
deteriorating audio
quality
out of range
ring tone incoming call
two ascending low
tones
pairing confirmation
two ascending
medium tones
mute enabled
two descending
medium tones
power off/mute disabled
series of ascending
tones
power on
Audio Tone Headphones Status

headphones status
18
three ascending high
tones
call connected
three descending
high tones
call ended/disconnected
low to high tone skip track forward
high to low tone skip track backward
single medium tone play music
single high tone stop music
Audio Tone Headphones Status