Motorola MOTO SURROUND Instruction sheet

en-US
read me

en Your wireless earbuds 1
Your wireless earbuds
Wear
Power
Status Light
Volume
& Track
Control
+
_
/
Calls, Voice
& Music
/
Calls, Voice
& Music

2Step 1: Charge up & power on en
Step 1: Charge up & power on
Note: Before use, charge until the status light turns
green.
(Wall charger
not included.)
Charge up.
Power on.
Press and hold
Power

en Step 2: Pair your earbuds 3
Step 2: Pair your earbuds
Pair with Motorola Connect
Note: You can use this app on most devices with
Android 4.3 or later. If your device is not compatible
with Motorola Connect, follow the steps in “Pair with
Bluetooth™” on page 4.
1Download the free Motorola Connect app from
Google Play™.
2Turn on your wireless earbuds.
3Open Motorola Connect, touch +, and select Moto
Surround from the list of devices.
Tip: You can also use Motorola Connect to check
your battery, see the last known location where you
connected, or get more help.

4Step 2: Pair your earbuds en
Pair with Bluetooth™
Pair without the Motorola Connect app.
1Turn on Bluetooth on yourdevice.
2Turn on yourwireless earbuds.
3On your device, go to the
Bluetooth menu to pair & connect.
Enter 0000 if prompted.
4When the device and earbuds
connect, you’ll hear a tone.
Light is
solid blue.
Light blinks
blue.

en Calls, Voice & Music Control 5
Calls, Voice & Music Control
The buttons at the ends of your earbuds perform the
same functions. Press either button to control calls,
voice commands, and music.
Note: Voice control may not work on some devices
or in all languages.
Note: Some features are phone/network dependent.
Volume down
Or press & hold to
restart a track or
play the last track.
Volume up
Or press & hold to
play the next track.
+
Music Play/Pause
Answer/End Calls
Start Voice Command
Music Play/Pause
Answer/End Calls
Start Voice Command

6Calls, Voice & Music Control en
Music
play/pause press
volume down/up press
next/previous track press and hold
Note: Depends on your
phone’s music controls.
change EQ settings press at the
same time to go to the next
sound profile
Calls
answer/end call press
mute during call press
reject a call press and hold
or
+
or
+
or
+
and
or
+
and
+
or

en Calls, Voice & Music Control 7
Voice
To issue a voice
command press and hold , then say a command
or

8Advanced en
Advanced
Status Lights
Pairing mode blinking blue
Connected steady blue
Low battery blinking red
Charging steady red
Full charge steady green
Charge level check steady green for two
seconds
Power off fading in/out blue