Motorola S305 - MOTOROKR - Headset User manual

Getting Started Guide
S305
MOTOROKR
TM

2
welcome
The MOTO ROKR ™ S305 Wireless Headphones deliver a
satisfying listening experience in a sleek design. Perfect
for streaming music from your music phone, MP3 player,
or computer.
• Goodbye wires —Move freely with wireless
control of your music and calls using intuitive
push buttons on your headphones.
• Chill out in comfort —Your headphone’s
comfortable behind-the-neck style makes it your
ideal partner for total music immersion.
•Stayconnected —Communicate hands-free with
the built-in microphone.
Caution: Before using your headphones for the first
time, please read the important legal and safety booklet
provided with your headphones.

your headphones
3
your headphones
Power Button/
Indicator Light (Í)
ChargingPort Microphone
Volume Buttons ( )
Tr ack Back
Button (Ô)
Tr ack Forward
Button (Õ)
Call Button (
)
Play/Pause/Mute Button (\)
9 Ï

charge it
4
charge it
You’ll need to charge your headphone’s battery before
using it. Plug the charger into the charging port on your
headphones (as shown below) and a wall outlet.
The indicator light is red while the battery is charging.
When the battery is fully charged, the indicator light
turns green.
Note: Your battery is designed to last the life of your
headphones. It should only be removed by a recycling
facility. Any attempt to remove or replace your battery
will damage your headphones.

connect wirelessly
5
connect wirelessl y
pair & connect
Once charged, get your headphones paired and
connected to your Bluetooth phone and/or music player.
1 Turn off any Bluetooth devices previously paired
(linked) with your headphones.
2 Turn on the Bluetooth feature on your phone or
music player.
3 Turn on your headphones by pressing and holding
the
Ö button until the indicator light turns green.
The indicator light flashes in red and green to
indicate the headphones are in discoverable mode.
4 Set your phone or music player to search for
Bluetooth devices.
5 Select Motorola S305 from the search results on
your phone or music player.
6 Select OK or Ye s to pair your headphones with your
phone or music player.
7 If prompted, enter 0000 for the passkey.

connect wirelessly
6
The indicator light rapidly flashes green every 3 seconds
when complete. For connect status:
reconnect
After initially pairing and connecting your phone and/or
music player and headphones, you don’t need to do
it again.
For daily use, make sure your headphones are turned
ON, and your phone and/or music player’s Bluetooth
feature is ON. Your headphones and phone/music player
will connect automatically!
Number
of Flashes Indicates
1 connected for calls and music
2 connected for music only
3 connected for calls only
4 not connected—repeat pair & connect
steps on page 5

connect wirelessly
7
test your connections
To confirm connection to your phone and/or music player:
make handsfree calls
1 Place the headphones over your ears (see “wear
your headphones” on page 8 for help).
2 Dial the number you want to call and press CALL/
SEND
key on your phone.
If your phone and headphones are successfully
connected, you hear ringing on your headphones.
play music
1 Place the headphones over your ears (see “wear
your headphones” on page 8 for help).
2 Play music on your phone or music player.
If your music source and headphones are successfully
connected, you hear music on your headphones.

wear your headphones
8
wear your headphones
Use both hands to gently rotate the headphones over
your head, then place the earhooks and speakers over
your ears for a snug fit as shown.
Once in place, the back of your headphones “float” over
your neck.

wear your headphones
9
If your headphones become flattened or bent (such as
when stored in a backpack), twist the speakers in the
direction as shown to restore to original shape.

turn it on & off
10
turn it on & off
Press and hold the Ö button until the indicator light turns
green and you hear a tone sequence.
Note: Your headphones will not turn on while charging.
Note: If your headphones are idle for 5 minutes, they
automatically turn off to conserve battery charge.

control your tunes
11
control your tunes
Playback controls on your headphones can be used when
listening to music from a Bluetooth-enabled music player
that also provides remote control capabilities (AVRCP).
If remote music control is not supported by your music
player, music should be controlled from your music
player.
Note: With some music players, previous track must be
pressed twice to go back to the previous song. Refer to
your music player’s manual for specific control features.
Press Å —play/pause music
Press and hold Å —stop music
Press à —previous track
Press and hold à —rewind
Press Ä —next track
Press and hold Ä —fast-forward

crank it up
12
crank it up
Press 9 and Ï to adjust volume on your headphones.
You’ll hear a tone when pressing 9 and Ï , and two tones
when reaching maximum or minimum volume on your
headphones.
Note: The volume setting on your music player may also
affect volume on your headphones.
Press Ï —decrease volume
Press 9 —increase volume

calls
13
calls
call control
Use these controls and indicator on your headphones
when making and receiving handsfree calls.
Notes:
• Some features are phone/network dependent.
• Your headphones support Handsfree and
Headset profiles. Accessing call functions
depends upon which profile your phone
supports. See your phone’s user’s guide for more
information.
Volume Buttons
Indicator
Light
Reject
Button
(Ã)
Call Button
Mute Button (Å)
(9)
(Ï)( )
Reject
Button
(Ä)

calls
14
receive calls
When you receive a call, the indicator light flashes green
rapidly on your headphones, and you hear a ringtone over
your headphones. If music is playing, the music pauses
or mutes, depending on your music player and
connection setup.
Press —answer call
Press (Ãor Ä) —reject call

calls
15
on a call
When a call is active, the indicator light flashes green
continuously on your headphones.
Press —end call
Press Å —mute/unmute call
(reminder tone is heard during mute)

calls
16
If you receive a second call, the indicator light flashes
green rapidly on your headphones, and you hear an alert.
On most phones, if you end the second call using your
phone or headphones, the call on hold instantly resumes.
If the other person ends the call, the original call remains
on hold until you resume the call, either by pressing the
button on your headphones or by using the phone to
resume the call.
Press —answer second call (first call is placed on hold),
end second call (first call resumes), or
resume first call on hold (when second caller hangs up)
Press (Ãor Ä) —reject second incoming call

calls
17
make a call
To make a call, you can redial the last dialed number or
make a voice dial call (if your phone supports this
feature).
Press —make a voice dial call (you hear a
prompt fromyour phone)
Press and hold —redial last number (you hear a tone when
successful)

status indicators
18
status i ndicators
indication status
green flash (for one
second)
powering on/off
green/red flashes pairing mode
one green flash
(every three seconds)
standby (both handsfree and
streaming music connection)
two green flashes
(every three seconds)
standby (streaming music
connection only)
three green flashes
(every three seconds)
standby (handsfree
connection only)
four green flashes
(every three seconds)
idle (not connected to a
device)
quick green flashes
(continuous)
incoming/outgoing call
green flashes
(continuous)
connected on a call
long green pulse music streaming

status indicators
19
Note:
The indicator light turns off after 3 minutes of
inactivity. An incoming call, button press, or streaming
music will turn the indicator light back on.
Note: Red flashing indicates a low battery on your
headphones.

tips & tricks
20
tips & tricks
connect to two devices
To connect to a phone and music device at the same
time:
1 Pair and connect to your phone first (see page 5).
2 Turn off your phone and your headphones.
3 Turn your headphones back on.
The Bluetooth indicator flashes red and green to
indicate the headphones are in discoverable mode.
4 Set your music player to search for Bluetooth
devices.
5 Select Motorola S305 from the search results on
your music player.
6 Select OK or Ye s to pair your headphones with your
music player. If prompted, enter
0000 for the
passkey
7 Turn off your headphones.
8 Turn your phone back on, and make sure the
Bluetooth feature is turned on in both the phone
and music device.