Motorola SB5100 - SURFboard - 38 Mbps Cable Modem User manual

SURFboard Cable Modem
R
Quick Reference Guide
SURFboard Cable Modem
R
USB CPE MAC ID:ABDCEF012345
S/N: PPPPMMYJJJSSSSSCAABBCCCC
HFC MAC ID: ABCDEF012345
CUSTOMER S/N:BCDFGHJKLMNP
ETHERNET CABLE
USB
+12VDC
Your computer may vary from illustration
Do not connect both the Ethernet and
USB Cable to your PC. Use one or
the other depending on your
PC Configuration.
TM
TM
SURFboard
CableModem
SURFboard
CableModem
USB Drivers
Installation Assistant
User Guide
Uninstall USB Driver
Contact Information
USB Drivers
Installation Assistant
User Guide
Uninstall USB Driver
Contact Information
USB Drivers
User Guide
Uninstall USB Driver
Contact Information
Installation Assistant
USB Drivers
User Guide
Uninstall USB Driver
Contact Information
Installation Assistant
SB5100 Series SURFboard Cable Modem
Installation CD-ROM
®
SB5100 Series SURFboard Cable Modem
Installation CD-ROM
®
MOTOROLAand the Stylized M Logo are registered in the
USPatent & Trademark Office. All other product or
servicenames are the property of their respective owners.
2002©Motorola, Inc.
MOTOROLAand the Stylized M Logo are registered in the
USPatent & Trademark Office. All other product or
servicenames are the property of their respective owners.
2002©Motorola, Inc.
502238-001
502238-001
Insert the CD-ROM only if you are
going to make a USB connection
or to read the SB5100 User Guide.
11
66
3
44
55
22
Power adapter
may vary from illustration
Ethernet
OR
USB

This information is to help you quickly solve a problem. Before calling your service provider, try unplugging
and plugging in the cable modem power cord in the AC wall outlet to restart the cable modem.
Check that the power adapter is plugged in. Power adapter may vary from illustration.
Green POWER light
is OFF
Cannot receive or
send data
Try pressing the Standby button.
If you have cable TV, check that your TV is working and the picture is clear.
If you cannot receive your regular TV channels, your data service will not function.
Try pressing the Standby button if the Standby light is ON.
Check the coaxial cable at the cable modem and wall outlet. Hand-tighten if necessary.
Check that the USB or Ethernet cable is properly connected to the cable modem
and your computer.
Check the IP address by following the steps in “Verifying the IP Address in Windows®95, 98,
or Windows Me®”or “Verifying the IP Address in Windows®2000 or Windows XP™” in the
User Guide (on the CD-ROM). For non Windows users, you must have Adobe Acrobat Reader
installed before opening the User Guide. Call your cable provider if you need an IP address.
Check the lights on the front panel. Note the first light from top to bottom that
is off. This light indicates where the error occurred as described in
“Front-Panel Lights and Error Conditions” in the User Guide (on the CD-ROM).
Standby
Standby
501653-001
MGBI
Troubleshooting
SURFboard Cable Modem User Guide
Installation and Configuration Overview
Troubleshooting
Contact Us
Frequently Asked Questions
Before You Begin
Introduction
CableModem
R
SB5100
SURFboard®
CableModem
The Solution
The Problem
SURFboard Cable Modem
R