Motorola CPEI 150 series User manual

CPEi150
Series
motorola.com
68P09291A10-A
68P09291A10-A
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark
Office. All other product or service names are the property of their respective owners.
© Motorola, Inc., 2008.

68P09291A19-A i
APR 2008
Table
of
Contents
Contents
Chapter 1: Desktop CPEi150 User Guide Overview Information
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Chapter 2: Installation
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Chapter 3: Basic Configuration
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Chapter 4: Advanced Configuration
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Chapter 5: Configuring TCP/IP
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Chapter 6: Troubleshooting
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Chapter 7: Important Safety and Legal Information
Important Safety and Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Caring for the Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
CMM Disclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Copyrights and Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

ii 68P09291A19-A
APR 2008

68P09291A19-A 1-1
APR 2008
Chapter
1
Chapter 1: Desktop CPEi150 User Guide
Overview Information

1-2 68P09291A19-A
APR 2008
1 Desktop CPEi150 User Guide Overview Information
Overview
Thank you for purchasing the Motorola CPE Indoor (CPEi) 150 desktop device. The
Desktop CPE allows you to connect to the wireless world easily and seamlessly without
complicated installation and setup procedures.
The Desktop CPE device provides the user:
• Convenience — with easy plug and play functionality. Flexible connectivity.
Compact design.
• Performance — dual integrated antennas, optimized for rich indoor multipath
environments. Best in Class Radio Performance. Reliable indoor coverage. High
throughput.
• Control — remote management capability allows easy detection and authentication
once the unit is setup. Robust security.
Figure 1-1: CPEi150 Unit
This product is subject to change. Not all features described in this WiMAX CPEi150
User’s Guide are available on all models.

68P09291A19-A 1-3
APR 2008
Desktop CPEi150 User Guide Overview Information 1
For the most recent documentation, visit the Product Documentation page on
www.motorola.com.
Powerful Features in a Single Unit
The CPE device provides the following features:
• WiMAX Authentication
• WAN DHCP Client
•LANDHCPServer
•RouterFunctions
• Firewall Protection
•PortForwarding
Front of CPE
The CPE unit contains an LED indicator at the top of the unit. The LEDs provide the
status of the unit and signal strength for easy adjustment during setup.
Side Panel
The side panel of the unit contains the Ethernet Port, the Power Connection Port, and a
Ethernet Port LED.
Table 1-1 LED Indicator Interface
Item Description
Power Status The LEDs are:
• On - power to the CPE is on.
• Off - power to the CPE is off.
Initializing Status The center LED flashes when the CPE is
initializing.
Signal Strength • If all LEDs on the bar are lit, full signal
is being received.
• If all LEDs are off, the CPE is
unplugged.
• LEDs will display a chase pattern when
the device is attempting to locate and
connect to the network.
There is no reset button on this CPE unit. If you want to reset the CPE, pull
out the power cord and plug it in again.
NOTE

1-4 68P09291A19-A
APR 2008
1 Desktop CPEi150 User Guide Overview Information
Figure 1-2: CPEi150 Side Panel
Operating Information
Operating temperature for this unit is 0-40ºC (32-104ºF)
AC Power Rating for this unit is:
• 110 ~ 240 AC
Table 1-2 Port Descriptions
Side Panel Ports Description
Ethernet Ethernet Port
Power AC Power Connector
Ethernet LED The LED is:
• On - Ethernet Port is connected.
• Off - Ethernet Port is not connected.
• Blinking in 5-10 second intervals - the
Ethernet cable is not connected to the
computer.

68P09291A19-A 2-1
APR 2008
Chapter
2
Chapter 2: Installation

2-2 68P09291A19-A
APR 2008
2Installation
Overview
To connect the CPEi150, you need to review the following sections:
• What’s in the box?
•EasySetup
What’s in the Box?
Before you begin installation, check that you have received the following items with
your CPE:
Easy Setup
Perform the following tasks before attaching the power cord or powering up the unit:
• Rotate the base of the CPE to be in a perpendicular position.
•
Connect one end of the Ethernet cable to the Ethernet port of the CPE. Stand the
CPE vertically on a flat surface.
• Connect the other end of the same Ethernet cable to an Ethernet port on your PC or
laptop computer.
• Connect the power cord and the power adapter together.
• Plug the power adapter into an AC power outlet.
• The CPE will automatically turn on.
• Connect the power adapter to the power connector on the side of the unit.
Table 2-1 CPE Box Contents
Item Description
AC Adaptor Power Adaptor
Power Cord Power cord that connects the AC Adaptor
to the CPE
Ethernet Cable Cable to connect the Ethernet port on
your CPE to your PC or laptop computer
ethernet port
Quick Start Guide Guide to demonstrate the setup and basic
IP configuration
Do NOT mount the CPE unit horizontally and do NOT block the air
ventilation holes at the top of the unit.
NOTE

68P09291A19-A 2-3
APR 2008
Installation 2
Before You Begin Configuration
Some settings on your computer must be verified or changed to ensure that your
computer configuration can support the Desktop CPE.
• Call your service provider to confirm that your service provider has registered your
unit.
• Verify that the IP address and DNS settings are automatically generated in your
Local Area connection of your Internet Protocol (TCP/IP) properties. Refer to the
chapter titled “Configuring TCP/IP” for information on how to do this.
• Ensure you know which protocol you will need to enter in the Setup Wizard
procedure. This will either be EAP-TLS or EAP-TTLS. If EAP-TTLS is to be used,
your service provider will provide you a Username and Password.
User Interface Overview
A web based Graphical User Interface (GUI) is used to configure the features of the CPE.
Figure 2-1: Main Menu Sample