Motorola VIP1002E User manual

VIP1002E
Installation Guide

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
CAUTION:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
CAUTION:
Graphical symbols and supplemental warning markings are located on the back and bottom
of the terminal.
WARNING
TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
The lightning ash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Product identication and supply rating are provided on the label found
on the bottom of the unit.
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.•
Keep these instructions.•
Heed all warnings.•
Follow all instructions.•
Do not use this apparatus near water.•
Clean only with a dry cloth.•
Do not block any ventilation openings. Install according to the manufacturer’s•
instructions.
Do not install near any heat sources, such as radiators, heat registers, stoves, or•
other apparatus (including ampliers) that produce heat.
Protect the power cord from being walked on or pinched, particularly at plugs,•
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specied by the manufacturer.•
Unplug this apparatus during lightning storms or when unused for long periods of•
time.
Refer all servicing to qualied service personnel. Servicing is required when the •
apparatus has been damaged in any way, such as the power supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
VIP1002E Installation Guide iii

Follow these important safety guidelines when positioning and connecting your TV
receiver:
Do not block the slots and openings.•
Do not place anything on top of the TV receiver.•
Do not position the TV receiver in an enclosed space that would restrict airow •
around the unit.
Do not position the TV receiver near any external heat source that could raise•
the temperature around the unit. Do not place the terminal on top of another heat
producing electronic device.
Allow for adequate ventilation around the TV receiver to maintain normal operating •
temperature. Do not place it in a sealed enclosure without providing for adequate
airow.
Do not plug the AC power cord into a switched power outlet.•
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE. THE UNIT MUST NOT BE EXPOSED TO
DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, ON THE UNIT.
CAUTION: THIS PRODUCT WAS QUALIFIED UNDER TEST CONDITIONS
THAT INCLUDED THE USE OF THE SUPPLIED CABLES BETWEEN SYSTEMS
COMPONENTS. TO ENSURE REGULATORY AND SAFETY COMPLIANCE, USE ONLY
THE PROVIDED POWER AND INTERFACE CABLES AND INSTALL THEM PROPERLY.
CAUTION: DIFFERENT TYPES OF CORD SETS MAY BE USED FOR CONNECTIONS
TO THE MAIN SUPPLY CIRCUIT. USE ONLY A MAIN LINE CORD THAT COMPLIES
WITH ALL APPLICABLE PRODUCT SAFETY REQUIREMENTS OF THE COUNTRY OF
USE.
CAUTION: INSTALLATION OF THIS PRODUCT MUST BE IN ACCORDANCE WITH
NATIONAL WIRING CODES AND CONFORM TO LOCAL REGULATIONS.
CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER
THAN THAT CONTAINED IN THE INSTALLATION AND TROUBLESHOOTING
INSTRUCTIONS. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: CHANGES AND MODIFICATIONS NOT EXPRESSLY APPROVED BY
MOTOROLA FOR COMPLIANCE COULD VOID USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
iv VIP1002E Installation Guide

VIP1002E Installation Guide v
SAVE THESE INSTRUCTIONS
When you see this symbol on a Motorola product, do not
dispose of the product with residential or commercial waste.
Recycling your Motorola Equipment
Please do not dispose of this product with your residential
or commercial waste. Some countries or regions, such as
the European Union, have set up systems to collect and
recycle electrical and electronic waste items. Contact your
local authorities for information about practices established
for your region. If collection systems are not available, call
Motorola Customer Service for assistance.
Please visit http://www.motorola.com/recycle for instructions
on recycling.
The STB and power supply conform to RoHS directive 2002/95/EC.
Regulatory Information
This device conforms to the safety regulations EN 60950-1 and therefore the international
safety regulation IEC 60950-1.
International Declaration of Conformity
Declaration of Conformity
We Motorola, Inc.
6450 Sequence Drive
San Diego, CA 92121, U.S.A.
declare under our sole responsibility that the
IP Set-Top Box Model VIP1002E
to which this declaration relates is in conformity with one or more of the following
standards:
EMC Standards
EN55022 EN55024 CISPR-22 CISPR-24
EN61000-3-2 EN61000-3-3
Safety Standards
EN60950-1: 2006 IEC 60950-1:2005,
2nd Edition
following the provisions of the Directive(s) of the Council of the European Union:
EMC Directive
2004/108/EC
Low Voltage Directive
2006/95/EC
EU Directives
2002/96/EC
2002/95/EC

Covered under one or more U.S. patents:
4577216, 4631603, 4790016, 4819098, 5109417, 5142656, 5216503, 5230038, 5345408,
5376968, 5497112, 5517250, 5530400, 5566089, 5579348, 5638128, 7034849, 7020879,
7017074, 7015928, 7002602, 6983370, 6917913, 6901420, 6895452, 6892304, 6879330,
6870538, 6853385, 6850252, 6836514, 6823353, 6822654, 6819330, 6810459, 6809734,
6807317, 6798420, 6792523, 6757820, 6757439, 6757343, 6751725, 6744472, 6738793,
6738072, 6734864, 6731295, 6721837, 6704358, 6700588, 6693643, 6667701, 6643798,
6573905, 6573846, 6570579, 6563511, 6556193, 6542160, 6538657, 6529935, 6529685,
6519287, 6516376, 6470370, 6466671, 6456746, 6449394, 6446037, 6442599, 6434583,
6424381, 6418529, 6278387, 6275834, 6272497, 6266686, 6243803, 6237016, 6222944,
6202130, 6189064, 6151362, 6148391, 6148387, 6133960, 6980596, 6829014, 6791622,
6563876, 6556250, 6438140, 6385248, 6385242, 6377713, 6262770, 6249547, 6167089,
6122321, 6100932, 6025878, 5949795, 5886736, 5844615, 5835730, 5809538, 5790177,
5703887, 6664826, 6300964, 6125147, 6122653, 6115072, 6108633, 6094636, 6067099,
6064450, 6058408, 5991865, 5970461, 5959659, 5953691, 5940072, 5935240, 5933160,
5926647, 5923385, 5909559, 5898601, 5892966, 5889949, 5886732, 5881279, 5812791,
5801785, 5801719, 5790842, 5774206, 5768429, 5754457, 5754456, 5751883, 5748046,
5715176, 5712665, 5677969, 5644355, 5623423, 5521918, 5253053, 4546387
Software License
VIP1002E IPTV Set-top Box
Motorola, Inc., Connected Home Solutions Business (“Motorola”)
101 Tournament Drive
Horsham, PA 19044
IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE (“LICENSE”) CAREFULLY
BEFORE YOU USE ANY SOFTWARE, FIRMWARE, AND RELATED DOCUMENTATION
(“SOFTWARE”) PROVIDED WITH MOTOROLA’S IP VIDEO RECEIVER OR HOME
THEATER SYSTEM (EACH SHALL BE REFERRED TO IN THIS LICENSE AS A
“RECEIVER”). BY USING THE RECEIVER AND/OR USING ANY OF THE SOFTWARE,
YOU INDICATE YOUR ACCEPTANCE OF EACH OF THE TERMS OF THIS LICENSE.
UPON ACCEPTANCE, THIS LICENSE WILL BE A LEGALLY-BINDING AGREEMENT
BETWEEN YOU AND MOTOROLA. THE TERMS OF THIS LICENSE APPLY TO YOU AND
TO ANY SUBSEQUENT USER OF THIS SOFTWARE.
IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS LICENSE (I) DO NOT
USE THE SOFTWARE AND (II) RETURN THE RECEIVER AND THE SOFTWARE
(COLLECTIVELY, “PRODUCT”), INCLUDING ALL COMPONENTS, DOCUMENTATION,
AND ANY OTHER MATERIALS PROVIDED WITH THE PRODUCT, TO YOUR POINT OF
PURCHASE OR SERVICE PROVIDER, AS THE CASE MAY BE, FOR A FULL REFUND.
The Software includes associated media, any printed materials, and any “on-line” or
electronic documentation. Software provided by third parties may be subject to separate
end-user license agreements from the manufacturers of such Software. The Software is
never sold. Motorola licenses the Software to the original customer and to any subsequent
licensee for personal use only on the terms of this License. Motorola and its third party
licensors retain the ownership of the Software.
vi VIP1002E Installation Guide

VIP1002E Installation Guide vii
You may:
USE the Software only in connection with the operation of the Product.
TRANSFER the Software (including all component parts and printed materials)
permanently to another person, but only if the person agrees to accept all of the terms of
this License. If you transfer the Software, you must at the same time transfer the Product
and all copies of the Software (if applicable) to the same person or destroy any copies not
transferred.
TERMINATE this License by destroying the original and all copies of the Software (if
applicable) in whatever form.
You may not:
(1) Loan, distribute, rent, lease, give, sublicense, or otherwise transfer the Software, in
whole or in part, to any other person, except as permitted under the TRANSFER paragraph
above. (2) Copy or translate the User Guide included with the Software, other than for
personal use. (3) Copy, alter, translate, decompile, disassemble, or reverse engineer the
Software, including but not limited to modifying the Software to make it operate on non-
compatible hardware. (4) Remove, alter, or cause not to be displayed any copyright notices
or startup message contained in the Software programs or documentation. (5) Export the
Software or the Product components in violation of any United States export laws.
The Product is not designed or intended for use in on-line control of aircraft, air trafc,
aircraft navigation, or aircraft communications; or in design, construction, operation, or
maintenance of any nuclear facility. MOTOROLA AND ITS THIRD PARTY LICENSORS
DISCLAIM ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR SUCH USES.
YOU REPRESENT AND WARRANT THAT YOU SHALL NOT USE THE PRODUCT FOR
SUCH PURPOSES.
Title to this Software, including the ownership of all copyrights, mask work rights, patents,
trademarks, and all other intellectual property rights subsisting in the foregoing, and all
adaptations to and modications of the foregoing, shall at all times remain with Motorola
and its third party licensors. Motorola retains all rights not expressly licensed under this
License. The Software, including any images, graphics, photographs, animation, video,
audio, music, and text incorporated therein, is owned by Motorola or its third-party licensors
and is protected by United States copyright laws and international treaty provisions. Except
as otherwise expressly provided in this License, the copying, reproduction, distribution,
or preparation of derivative works of the Software, any portion of the Product, or the
documentation is strictly prohibited by such laws and treaty provisions. Nothing in this
License constitutes a waiver of Motorola’s rights under United States copyright law.
This License and your rights regarding any matter it addresses are governed by the laws of
the Commonwealth of Pennsylvania, without reference to conict of laws principles. THIS
LICENSE SHALL TERMINATE AUTOMATICALLY if you fail to comply with the terms of this
License.
Motorola is not responsible for any third party software that is provided as a bundled
application, or otherwise, with the Software or that is downloaded to, or otherwise installed
on, the Product.

U.S. GOVERNMENT RESTRICTED RIGHTS
The Product and documentation is provided with RESTRICTED RIGHTS. The use,
duplication, or disclosure by the Government is subject to restrictions as set forth in
subdivision (c)(1)(ii) of The Rights in Technical Data and Computer Software clause at
52.227 7013. The contractor/manufacturer is Motorola, Inc., Connected Home Solutions,
101 Tournament Drive, Horsham, PA 19044.
This product is protected by certain intellectual property rights of Microsoft Corporation. Use
or distribution of such technology outside of this product is prohibited without a license from
Microsoft Corporation or an authorized Microsoft Corporation subsidiary.
________________________________________________________________________
Copyright © 2010 Motorola, Inc.
All rights reserved. No part of this publication may be reproduced in any form or by any
means or used to make any derivative work (such as translation, transformation, or
adaptation) without written permission from Motorola, Inc.
Motorola reserves the right to revise this publication and to make changes in content from
time to time without obligation on the part of Motorola to provide notication of such revision
or change. Motorola provides this guide without warranty of any kind, either implied or
expressed, including but not limited to the implied warranties of merchantability and tness
for a particular purpose. Motorola may make improvements or changes in the product(s)
described in this manual at any time.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Ofce.
Dolby Digital manufactured under license from Dolby Laboratories Licensing Corporation.
Dolby, ProLogic, and the double D symbol are registered trademarks of Dolby Laboratories.
This device incorporates a copyright protection technology that is protected by U.S. patents
and other intellectual property rights. Use of the copyright protection technology is granted
by Macrovision for home and other limited pay per view uses only, unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited. Rovi is a
protected trademark of Rovi Corp. HDMI, the HDMI logo and High Denition Multimedia
Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other product
or service names are the property of their respective owners.
viii VIP1002E Installation Guide

VIP1002E Installation Guide ix
Introduction...............................................1
Front Panel ............................................1
Rear Panel.............................................2
Operation ................................................3
Turning Power On and Off.................................3
Changing Channels......................................3
Adjusting the Volume .....................................3
Program Guide .........................................3
Connecting the VIP Set-top ..................................4
Video Connections ......................................4
Audio Connections.......................................5
Connecting the Motorola VIP1002E Set-top......................5
Connecting to an HDTV...................................5
Connecting Audio to an A/V Receiver . . . . . . . . . . . . . . . . . . . . . . . . 6
Connecting to an SDTV...................................7
Connecting to an SDTV and Stereo VCR . . . . . . . . . . . . . . . . . . . . . 8
Connecting to an A/V Receiver, SDTV, and VCR ...............9
Recording Your Connections ................................10
Troubleshooting ..........................................11
Contents

Introduction
1 VIP1002E Installation Guide
Key Item Function
1 Power/Link
LED Indicator
Lights green to indicate a normal operating state. Lights
yellow to indicate that software is being downloaded to
the VIP1002E set-top box.
Note that a continuously-ashing red or yellow LED
indicates an error state; try rebooting the set-top box.
Congratulations on choosing the Motorola VIP1002E set-top! Motorola set-tops represent
the latest in home entertainment. It starts with your VIP1002E set-top. Motorola IPTV
enables you to enjoy television like never before.
After installation, you can simply sit back and enjoy the service! If you decide in the future to
add other devices to your current conguration, such as a home theater receiver, HDTV, or
a stereo TV, you can refer to this manual for instructions to make the connections.
Your Motorola VIP1002E set-top has outputs to many types of audio and video devices.
Your service provider will make the optimal connection to your television at initial installation
of your service, or you can make them yourself by following the simple diagrams provided
in this guide.
Front Panel
The following illustration shows the front panel of the VIP1002E.
Figure 1: Front Panel

VIP1002E Installation Guide 2
Figure 2: Rear Panel
Key Item Function
1 Power Connector for the DC power adapter.
2 Reset Reboots the VIP1002E, and resets all functions to the
original factory settings. Use only when directed by service
provider personnel.
3 Video Out SCART video output to a TV, VCR, or other device.
4 HDMI Connects to a high-denition TV or home theater receiver
with an HDMI input (for a DVI input use an HDMI-to-DVI
adapter).
5 USB USB 2.0 connector.
6 Digital
Audio
Digital S/PDIF audio connection.
7 Ethernet RJ-45 network connection for digital signal from your
service provider.
Note: There are two Ethernet LEDs, one for Link and one
for Activity. The Link LED illuminates when an Ethernet
cable is plugged into the VIP1002E set-top box and the
Ethernet network is up. The Activity LED blinks whenever
trafc is transmitted or received on the Ethernet interface.
Rear Panel
The following illustration shows the rear panel of the VIP1002E.

Operation
3 VIP1002E Installation Guide
Turning Power On and Off
To power up the VIP1002E set-top, connect the DC adapter cable to the set-top, and then
connect the power adapter to the AC inlet. Do not connect the power supply unit to the AC
source rst and then to the set-top.
Changing Channels
To change channels:
Press the up or down buttons on the remote control to step through the channel•
selection.
Enter the number of the channel you wish to view using the number keys on the•
remote control.
Adjusting the Volume
To adjust the volume or mute:
Press• VOLUME + or – on the remote control. Note that when you adjust the volume,
the volume scale is displayed on the screen.
Press• MUTE on the remote control to turn the sound off and on again.

Connecting the VIP Set-top
VIP1002E Installation Guide 4
This section explains how to connect the VIP1002E to your home entertainment system.
Instructions and diagrams are included for connections to the following:
High-Denition TV (HDTV)•
Home Theater Receiver–Audio•
Standard-Denition TV (SDTV)•
Standard-Denition TV and Stereo VCR•
Standard-Denition TV, Stereo VCR, and A/V Receiver•
NOTE: Before you move or change components on your entertainment system, disconnect
power from the TV receiver.
Video Connections
The Motorola VIP1002E set-top offers the following video outputs:
High-Denition TV (HDMI)•
Standard-Denition TV (SCART)•
To determine the available inputs on your TV, check the manual supplied with the TV or on
the TV itself. Use the following guidelines to determine the best video connection for your
system:
Connector Audio / Video Description
HDMI Audio and Video HDMI offers higher video quality than component
video. If your HDTV has an HDMI input, use the
HDMI connector.
If your HDTV has a DVI input, you can use
an HDMI-to-DVI converter cable to connect to
the VIP1002E HDMI connector. Use a cable
with an HDMI connector on one end and a
DVI connector on the other end. We do not
recommend using an HDMI-to-DVI or DVI-to-
HDMI adapter.
SCART Audio and Video For Standard-Denition TV, use the SCART
connector on the VIP1002E.

5 VIP1002E Installation Guide
Audio Connections
Depending on its capabilities, to connect your television or home theater receiver for audio,
use the digital output to deliver S/PDIF Dolby audio. In most cases, it offers better quality,
including support for Dolby Digital 5.1 surround sound.
NOTE: The cabling diagrams show sample audio/video (A/V) connections to a home
theater receiver where the home theater receiver functions as an A/V router. When
connecting to a home theater receiver, refer to its installation manual for information about
the baseband or S/PDIF inputs.
Connecting the Motorola VIP1002E Set-top
The following pages contain conguration diagrams designed to help you connect your
VIP1002E set-top. Identify the diagram that most closely matches your set up. After making
the indicated connections, you will soon be enjoying the latest in home entertainment with
IPTV.
Before you move or change components, disconnect the power cord from your VIP1002E
set-top and other components.
Connecting to an HDTV
Connect the HDTV using the HDMI connector. If your HDTV has a DVI input, you can use
an HDMI-to-DVI converter to connect to the VIP1002E HDMI connector. To connect the
audio, refer to the following section.
IMPORTANT: The very best audio and video connection for an HDMI TV is from the HDMI
output on the VIP1002E set-top. If you have an HDTV with DVI input, then you should
purchase an HDMI-to-DVI adapter to connect between your DVI TV and the HDMI output
on the VIP1002E set-top. No audio is present on this adapter, so you must connect the
Optical (S/PDIF) or L- and R- AUDIO outputs on the VIP1002E set-top to audio inputs on
your DVI TV.

VIP1002E Installation Guide 6
Figure 3: Audio Connection
Connecting Audio to an A/V Receiver
If your home theater receiver supports it, use the coaxial S/PDIF output. The following
illustration shows a VIP1002E audio connection.

7 VIP1002E Installation Guide
Connecting to an SDTV
The following illustration shows a VIP1002E SDTV connection.
To determine the best connection, see Video Connections on page 4.
NOTE: This video connection method does not support HD video. For more information,
see “Connecting to an HDTV” on page 5.
Figure 4: SDTV Connection

VIP1002E Installation Guide 8
Connecting to an SDTV and Stereo VCR
The following illustration shows VIP1002E SDTV and stereo VCR connections.
Figure 5: SDTV and Stereo VCR Connection
NOTE: This video connection method does not support HD video. For more information,
see “Connecting to an HDTV” on page 5.

9 VIP1002E Installation Guide
Connecting to an A/V Receiver, SDTV, and VCR
The following illustration shows VIP1002E A/V receiver, SDTV, and VCR connections.
NOTE: This video connection method does not support HD video. For more information,
see “Connecting to an HDTV” on page 5.
Figure 6: A/V Receiver, SDTV, and VCR Connection

VIP1002E Installation Guide 10
Recording Your Connections
Use the following diagram to record the connections between your home entertainment
components. You can also use this diagram to reconnect your system if you move the
equipment or add new equipment.
Figure 7: A/V Receiver, SDTV, and VCR Connection
NOTE: Before connecting or changing cable connections, disconnect the power from
the television receiver. Do not place another component or object on top of the television
receiver.

11 VIP1002E Installation Guide
Troubleshooting
Before calling Tech Support, review this troubleshooting guide. If the suggestions do not
help you quickly solve a problem, please contact your service provider.
Problem Possible Solutions
The VIP1002E set-
top will not power on.
Verify that the AC power cord is connected to the VIP1002E
set-top and an AC outlet. Unplug the VIP1002E set-top
from the outlet, plug it back in, and recycle the power.
The VIP1002E set-top should not be connected to any
switched outlet on another device, such as a VCR or home
theater receiver that provides switched AC power. Verify
that AC power is present on the AC outlet with a lamp or
another appliance.
The remote control
does not work.
Verify that the television is on.
Verify that there are no obstructions between the remote
control and the VIP1002E set-top. Aim the remote control
directly at the VIP1002E set-top front panel, not the
television or VCR.
The angle between the remote control and the VIP1002E
set-top may be too large. Stand in front of the VIP1002E
set-top and not too far to either side.
Press and release operation keys one at a time, rmly and
deliberately.
Check the batteries in the remote control. Install new
batteries if needed.
There is no audio
when viewing TV
channels.
Verify that the Mute button on the remote control has
not been pressed. Press MUTE on the remote control to
restore sound.
Verify that the VIP1002E set-top audio output is connected
to the television or home theater receiver.
If the VIP1002E set-top audio output is connected to the
TV, verify that the Mute button on the TV has not been
pressed.
If the VIP1002E set-top audio output is connected to a
home theater receiver, verify that the home theater receiver
is set to the appropriate input source and its Mute button
has not been pressed.
Verify that you have the correct cables for the audio ports
and that the home theater receiver is properly switched.
Verify that the audio cables are rmly connected between
the VIP1002E set-top and the audio playback device (TV,
home theater receiver, etc.).