Motorola CLS1110 User manual

1
@6864110W15@
6864110W15-A
031092o
Models CLS1110 and CLS1410
SERIES TWO-WAY RADIO
User's Guide
6864110w15o.book Page 1 Wednesday, March 19, 2003 6:17 PM

2
6864110w15o.book Page 2 Wednesday, March 19, 2003 6:17 PM

Contents
1
Introduction....................................2
FCC Licensing Information.......... 4
Safety and General Information .. 6
Radio Controls.............................13
Getting Started.............................14
Installing the Swivel Belt
Holster ....................................14
Installing the Batteries................15
Charging the Battery..................16
Turning Your Radio On and Off.19
Adjusting the Volume.................20
Reading the Display...................20
Talking and Receiving.................21
Basic Radio Operation...............21
Signal Strength and
Channel Busy Indicators.........21
Talk Range.................................22
Handsfree Use (VOX)
(CLS1410 only).......................22
Locking the Keypad ...................23
Monitoring a Channel.................24
Scanning (CLS1410 Only).........24
Programming Mode.....................26
Factory Default Settings.............27
Entering Programming Mode.....28
Cloning Radio Settings...............32
Advanced Features......................33
Troubleshooting .........................35
Use and Care................................38
Frequencies and Bandwidths.....39
Spirit GT Series Programming ...45
Warranty .......................................46
6864110w15oTOC.fm Page 1 Wednesday, March 19, 2003 6:32 PM

Introduction
2
Introduction
Thank you for purchasing a Motorola _Series Radio. Your radio is a product of
Motorola’s 70 plus years of experience as a world leader in designing and
manufacturing communications equipment. The _Series radios provide cost-
effective communications for businesses such as retail stores, restaurants, hotels,
and schools. Motorola professional two-way radios are the perfect communications
solution for all of today’s fast-paced industries.
Please read this guide carefully so you know how to properly operate the radio
before use.
Package Contents
•_Series Radio
• Swivel Belt Holster
• Lithium Ion Battery
• Drop-In Charger with Transformer
• User's Guide
• Accessory Brochure
•WarrantyCard
6864110w15o.book Page 2 Wednesday, March 19, 2003 6:17 PM

Introduction
3
For product-related questions, please call:
1-800-448-6686 in the USA
1-888-390-6456 TTY (Text Telephone)
On the Web:
www.motorola.com/radios/professional
ATTENTION
Before using this product, read the RF energy awareness information and operating
instructions in the Safety and General Information section of this guide to ensure
compliance with RF energy exposure limits.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or
service names are the property of their respective owners.
© Motorola, Inc. 2003.
6864110w15o.book Page 3 Wednesday, March 19, 2003 6:17 PM

FCC Licensing Information
4
FCC Licensing Information
_ Series professional two-way radios operate on radio frequencies that are regulated by the Federal
Communications Commission (FCC). In order to transmit on these frequencies, you are required to have a
license issued by the FCC.
Application is made available on FCC Forms 601, schedules D and H, and remittance form 159. If ordering the
forms by mail, phone, or from the FCC website, please request document number
000601 , which includes all
forms and instructions. If using the FCC Fax-on-Demand system, use the 7-digit order numbers listed below.
To obtain the required forms, please use the following contact information:
Before filling out your application, you must decide which frequency(ies) you can operate on. See Frequencies
and Bandwidths on page 39. For questions on determining your radio frequency, please call Motorola Product
Services at 1-800-448-6686.
Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the FCC
to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments should
Faxed
contact the Fax-On-Demand
system at:
Mailed
call the FCC forms hotline
at:
By Phone or Web
or for questions
regarding FCC license
contact the FCC at:
1-202-418-0177 1-800-418-FORM
1-800-418-3676
1-888-CALL-FCC
1-888-225-5322
or: http://www.fcc.gov
Request forms 3060001,
3060003, and 3060006 Request document 000601 Request document 000601
6864110w15o.book Page 4 Wednesday, March 19, 2003 6:17 PM

FCC Licensing Information
5
be made only by or under the supervision of a person certified as technically qualified to perform transmitter
maintenance and repairs in the private land mobile and fixed services as certified by an organization
representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor,
etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules.
Note: Use of this radio outside the country where it was intended to be distributed is subject to government
regulations and may be prohibited.
6864110w15o.book Page 5 Wednesday, March 19, 2003 6:17 PM

Safety and General Information
6
Safety and General Information
Important Information on Safe and Efficient Operation.
Read This Information Before Using Your Radio.
The information provided in this document supersedes the general safety information contained in user guides
published prior to December 1, 2002.
Transmit and Receive Procedure
Your two-way radio contains a transmitter and a receiver. To control your exposure and ensure compliance with
the occupational/controlled environment exposure limits, always adhere to the following procedure:
• Transmit no more than 50% of the time.
• To transmit (talk), press the Push to Talk (PTT) button.
• To receive calls, release the PTT button.
Transmitting 50% of the time, or less, is important because the radio generates measurable RF energy exposure
only when transmitting (in terms of measuring standards compliance).
Exposure to Radio Frequency Energy
Your Motorola radio is designed to comply with the following national and international standards and guidelines
regarding exposure of human beings to radio frequency electromagnetic energy:
• United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-
part J
• American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95.
1-1992
6864110w15o.book Page 6 Wednesday, March 19, 2003 6:17 PM

Safety and General Information
7
• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio Frequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz, 1999
• Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human
Exposure) Standard 2001 (applicable to wireless phones only)
• ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2002) “additional requirements for SMR,
cellular, and PCS product certification.”
To assure optimal radio performance and make sure human exposure to radio frequency electromagnetic energy
is within the guidelines set forth in the above standards, always adhere to the following procedures.
Portable Radio Operation and EME Exposure
Antenna Care
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or
attachments could damage the radio and may violate FCC regulations.
DO NOT hold the antenna when the radio is “IN USE.” Holding the antenna affects the effective range.
Two-Way Radio Operation
When using your radio as a traditional two-way radio, hold the radio in a vertical position
with the microphone 1 to 2 inches (2.5 to 5 cm) away from the lips
.
6864110w15o.book Page 7 Wednesday, March 19, 2003 6:17 PM

Safety and General Information
8
Body-Worn Operation
To maintain compliance with FCC/Health Canada RF exposure guidelines, if you wear a radio on your body
when transmitting, always place the radio in
a Motorola-supplied or approved clip, holder, holster, case, or body
harness for this product. Use of non-Motorola-approved accessories may exceed FCC/Health Canada RF
exposure guidelines. If you do not use one of the Motorola-supplied or approved body-worn accessories, and
are not using the radio held in the normal use position,
ensure the radio and its antenna are at least 1 inch
(2.5 cm) from your body when transmitting
.
Data Operation
If applicable, when using any data feature of the radio with or without an accessory cable, position the radio
and its antenna at least 1 inch (2.5 cm) from the body
.
Approved Accessories
For a list of approved Motorola accessories visit our website at www.motorola.com .
Electromagnetic Interference/Compatibility
Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately
shielded, designed, or otherwise configured for electromagnetic compatibility.
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where
posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive
to external RF energy.
6864110w15o.book Page 8 Wednesday, March 19, 2003 6:17 PM

Safety and General Information
9
Aircraft
When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in
accordance with applicable regulations per airline crew instructions.
Medical Devices - Pacemakers
The Advanced Medical Technology Association recommends that a minimum separation of 6 inches (15 cm) be
maintained between a handheld wireless radio and a pacemaker. These recommendations are consistent with
the independent research by, and recommendations of the U.S. Food and Drug Administration.
Persons with pacemakers should:
• ALWAYS keep the radio more than six inches (15 cm) from their pacemaker when the radio is turned ON.
• Not carry the radio in the breast pocket.
• Use the ear opposite the pacemaker to minimize the potential for interference.
• Turn the radio OFF immediately if you have any reason to suspect that interference is taking place.
Medical Devices - Hearing Aids
Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may
want to consult your hearing aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determine if it is
adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.
6864110w15o.book Page 9 Wednesday, March 19, 2003 6:17 PM

Safety and General Information
10
Safety and General Use While Driving
Check the laws and regulations on the use of radios in the area where you drive. Always obey them. When using
your radio while driving, please:
• Give full attention to driving and to the road.
• Use hands-free operation, if available.
• Pull off the road and park before making or answering a call if driving conditions so require.
Operational Warnings
For Vehicles with an Air Bag
Do not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with
great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be
propelled with great force and cause serious injury to occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your radio prior to entering any area with a potentially explosive atmosphere, unless it is a radio type
especially qualified for use in such areas as “Intrinsically Safe.” Do not remove, install, or charge batteries in
such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury
or even death.
Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below
decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles,
such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your
vehicle engine. Areas with potentially explosive atmospheres are often but not always posted.
6864110w15o.book Page 10 Wednesday, March 19, 2003 6:17 PM

Safety and General Information
11
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting
caps, in a blasting area, or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.
Operational Cautions
Antennas
Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with
your skin, a minor burn can result.
Batteries
All batteries can cause property damage and/or bodily injury such as burns if a conductive material such as
jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical
circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when
placing it inside a pocket, purse, or other container with metal objects.
Battery Charger Safety Instructions
Save these Instructions
1. Do not expose the charger to rain or snow.
2. Do not operate or disassemble the charger if it has received a sharp blow, or has been dropped or damaged
in any way.
3. Never alter the AC cord or plug provided with the unit. If the plug will not fit the outlet, have the proper outlet
installed by a qualified electrician. An improper condition can result in a risk of electric shock.
6864110w15o.book Page 11 Wednesday, March 19, 2003 6:17 PM

Safety and General Information
12
4. To reduce the risk of damage to the cord or plug, pull the plug rather than the cord when disconnecting the
charger from the AC receptacle.
5. To reduce the risk of electric shock, unplug the charger from the outlet before attempting any maintenance
or cleaning.
6. Use of an attachment not recommended or sold by Motorola may result in a risk of fire, electric shock, or
personal injury.
7. Make sure the cord is located so it will not be stepped on, tripped over, or subjected to damage or stress.
8. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord
could result in a risk of fire and/or electric shock. If an extension cord must be used, make sure that:
• The pins on the plug of the extension cord are the same number, size, and shape as those on the plug of
the charger.
• The extension cord is properly wired and in good electrical condition.
• The cord size is 18 AWG for lengths up to 100 feet, and 16 AWG for lengths up to 150 feet.
9. The supply cord of this charger cannot be replaced. If the cord is damaged, call Motorola Product Services
at 1-800-448-6686 in the USA or 1-888-390-6456 TTY (Text Telephone).
6864110w15o.book Page 12 Wednesday, March 19, 2003 6:17 PM

Radio Controls
13
Radio Controls
020976o
Use Pto:
Turn radio on/off
Adjust radio volume
Use Bto:
Transmit call tone
Use Push to Talk to:
Talk
Exit a menu
Use Sto:
Lock the keypad
Scroll through menus
Use Tto:
Monitor the frequency
Scan channels (CLS1410 only)
Microphone
Accessory Jack
Speaker
Use [and ]to:
Change channels
(CLS1410 only)
Change menu settings
6864110w15o.book Page 13 Wednesday, March 19, 2003 6:17 PM

Getting Started
14
Getting Started
Installing the Swivel Belt Holster
1. Slide the bottom of the radio into the holster until it snaps
into place.
2. To remove, push the tab on the holster and pull the radio
away from the holster.
Note: In case of loss, please contact your point-of-sale or
call 1-800-448-6686 to request replacement part
number HCLN4013.
031
0
56532 Swivel
Belt Holster
6864110w15o.book Page 14 Wednesday, March 19, 2003 6:17 PM

Getting Started
15
Installing the Batteries
Your radio uses a rechargeable Lithium Ion (Li Ion) battery or 3 AAA alkaline batteries
with the 56564 AAA Battery Tray (not included with all models).
Li Ion Battery
1. If the battery door is already in place, push down on the
recess on the door and slide it off the radio.
2. Insert the battery, printed arrows first, into the battery
compartment and press down to secure firmly in place.
3. Slide and snap the battery door into place.
AAA Alkaline Batteries
1. If the battery door is already in place, push down on the
recess on the door and slide it off the radio.
2. Insert 3 AAA batteries into the battery tray as shown by
the markings inside the tray.
3. Insert the battery tray into the battery compartment and press down to secure
firmly in place.
4. Slide and snap the battery door into place.
5. Press Suntil Aor nflashes (this menu does not appear if using a Motorola
Li Ion battery).
6. Press [or ]to select Afor alkaline batteries, or nfor rechargeable AAA cells.
6864110w15o.book Page 15 Wednesday, March 19, 2003 6:17 PM

Getting Started
16
Charging the Battery
Use only the charger supplied with the radio, or other _Series power
accessories. For optimum battery life, do not charge the battery for prolonged periods
after it is fully charged. Charging the battery over the weekend is acceptable.
Using the Drop-in Charger
1. Place the charger on a flat surface.
2. Insert the plug of the power cord into the jack
on the charger.
3. Plug the cord into an AC outlet.
4. Turn the radio off. If the radio is on while
charging, it will take longer to fully charge.
5. Insert the radio (with battery installed) into
the front charging pocket.
Note: The radio will fit in the charger with the
holster on.
The drop-in charger will also sequentially charge a spare SNN5571 Li Ion battery.
The spare battery will not begin to charge until the radio battery is fully charged. Both
batteries will charge in approximately
2–6 hours.
6864110w15o.book Page 16 Wednesday, March 19, 2003 6:17 PM

Getting Started
17
Using the 56531 Multi-Unit Charger
The Multi-Unit Charger (MUC) allows drop-in charging of up to 6 radios or batteries.
Batteries can be charged inside the radios or removed and placed in the MUC
separately. Each of the 6 charging pockets can hold a radio or battery, but not both.
1. Place the charger on a flat surface.
2. Insert the power cord plug into the jack on the MUC.
3. Plug the cord into an AC outlet.
4. Turn the radio off.
5. Insert the radio or battery into the charging pocket.
Radio charging pocket
Battery charging pocket
6864110w15o.book Page 17 Wednesday, March 19, 2003 6:17 PM

Getting Started
18
Charging Status LEDs
On the drop-in charger, the radio and battery charging pockets have their own LEDs.
On the MUC, each of the 6 charging pockets has an LED. The LEDs are grouped into
pairs to show which charging pockets are paired (for cloning, see page 32).
The LED is solid red when the battery is charging, and solid green when charging is
complete.
Battery Meter
The battery meter in the upper left corner of the display (see page 20) shows how
much battery power is remaining.
Battery Life
Based on 5% transmit, 5% receive, 90% standby (standard duty cycle):
Note: For optimal battery life, high-capacity alkaline batteries are recommended.
Battery Type 3 Bars 2 Bars 1 Bar Flashing
db c m
Li Ion 100%–85% 85%–25% 25%–10% Final 10%
AAA Alkaline 100%–75% 75%–40% 40%–10% Final 10%
Li Ion – 12 Hours AAA Alkaline – 10 Hours
6864110w15o.book Page 18 Wednesday, March 19, 2003 6:17 PM