Moxa Technologies UC-7408 series User manual

15-34 www.moxa.com [email protected]
Embedded Computing Solutions
Embedded Computers for Communication > UC-7408 Series
15
Typical Application
UC-7408 Series
Intel XScale›IXP422/425, 266/533 MHz processor
128 MB RAM on-board, 32 MB flash disk›
8 RS-232/422/485 serial ports›
8-ch digital input and 8-ch digital output (TTL Signal)›
Dual 10/100 Mbps Ethernet for network redundancy›
CompactFlash socket for storage expansion›
PCMCIA supporting WLAN, GPRS, UMTS, HSDPA›
Ready-to-run Linux or WinCE 5.0 platform›
DIN-rail or wallmount installation›
Robust, fanless design›
-40 to 75°C wide temperature models available›
RISC-based data acquisition computers with 8 serial ports,
8 DI/DO channels, dual LANs, PCMCIA, CompactFlash
Overview
The UC-7408 data acquisition embedded computers feature 8
RS-232/422/485 serial ports, an 8-ch digital input and 8-ch digital
output, dual 10/100 Mbps ports, a PCMCIA interface for wireless
LAN communication, and CompactFlash slot for mass storage disk
expansion.
The digital I/O feature of the UC-7408 series provides users with the
convenience of connecting digital devices to a front-end embedded
computer. The UC-7408 can be used for on/off event handling by
reading the state change of the digital input signal. In addition, output
signals from external digital devices can be imported through the UC-
7408’s digital input channels, and the UC-7408 can be programmed
to take immediate action when it detects a change in the state of the
signal.
The digital output channels on the UC-7408 can connect to devices
and trigger digital output signals to control external digital devices.
With the digital I/O feature, Moxa’s embedded computers support both
data acquisition and protocol conversion through the RS-232/422/485
serial ports, and simple I/O control with the digital I/O signals.
UC-7408 embedded computers come pre-installed with either the
open standard Linux OS, or the more common WinCE OS. Software
written for a desktop PC can be easily ported to the UC-7408 platform
by using a common compiler, without needing to modify the code, and
the software you develop for your own applications can be stored in
the UC-7408’s flash memory.
In addition to the standard model, a wide temperature (-40 to
75°C) model of the UC-7408 is available for use in harsh industrial
environments.
The certification logos shown here apply to some or all of the
products in this section. For details, see “Regulatory Approvals”
under “Specifications” below.

Industrial Networking Solutions
15-35
[email protected] www.moxa.com
15
Embedded Computers for Communication > UC-7408 Series
Hardware Specifications
Front View Rear View
Appearance
8-ch Digital Output
8-ch Digital Output
RS-232/422/485 x
8, RJ45
USB 1.1 Client x 1
mini B connector
PCMCIA x 1
10/100 Mbps
Ethernet x 2
CF x 1
12 to 48 VDC
Power Input
RS-232 PPP/Console
Computer
CPU:
UC-7408: Intel XScale IXP422 266 MHz
UC-7408 Plus: Intel XScale IXP425 533 MHz
OS (pre-installed): Embedded Linux or Windows CE 5.0
DRAM: 128 MB onboard (256 MB for ODM)
Flash: 32 MB onboard
PCMCIA: Cardbus card and 16-bit PCMCIA 2.1 or JEIDA 4.2 card
Storage Expansion: CompactFlash socket
Ethernet Interface
LAN: 2 auto-sensing 10/100 Mbps ports (RJ45)
Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface
Serial Standards: 8 RS-232/422/485 ports, software-selectable
(8-pin RJ45)
ESD Protection: 15 KV for all signals
Console Port: RS-232 (all signals), RJ45 connector, supports PPP
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data
direction control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates;
see user’s manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Digital Input
Input Channels: 8
Input Voltage:
• Logic 0: 0-0.8 V
• Logic 1: 2.0-5.5 V
-24 mA
Digital Output
Output Channels: 8
Output Current: 24 mA
Output Voltage:
• Logic 0: 0-0.55 V
• Logic 1: 2.5-3.3 V
LEDs
System: OS Ready, Console (TxD/RxD)
LAN: 10M/100M x 2
Serial: TxD x 8, RxD x 8
Physical Characteristics
Housing: SECC sheet metal (1 mm)
Weight: 870 g
Dimensions: 197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in)
Mounting: DIN-Rail, wall
Environmental Limits
Operating Temperature:
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Operating Humidity: 5 to 95% RH
Storage Temperature: -20 to 80°C (-4 to 176°F)
Anti-vibration: 1g @ IEC-68-2-6, sine wave, 5-500 Hz, 1 Oct./min, 1
hr/axis
Anti-shock: 5g @ IEC-68-2-27, half sine wave, 30 ms
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption: 7.6 W
• 315 mA @ 24 VDC
• 628 mA @ 12 VDC
Regulatory Approvals
EMC: CE (EN55022 Class A, EN61000-3-2 Class A, EN61000-3-3,
EN55024), FCC (Part 15 Subpart B, CISPR 22 Class A)
Safety: UL/cUL (UL60950-1, CSA C22.2 No. 60950-1-03), TÜV
(EN60950-1)
Reliability
Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty

15-36 www.moxa.com [email protected]
Embedded Computing Solutions
Embedded Computers for Communication > UC-7408 Series
15
Software Specifications
Ordering Information
Package Checklist
UC-7408 embedded computer•
Wall mounting kit•
DIN-Rail mounting kit•
Ethernet cable: RJ45 to RJ45•
cross-over cable, 100 cm
CBL-RJ45F9-150: 8-pin RJ45 to DB9•
female console port cable, 150 cm
Universal power adaptor (including•
terminal block to power jack converter)
Document and Software CD•
Quick Installation Guide (printed)•
Warranty Card•
PCMCIA &
CompactFlash Console
PHYPHY
PCI Bus
RTC
Decoder
12 3 4 5 6 7 8
Moxa UART ASIC
USB
Client
PCI to cardbus
Bridge
XScale IXP-422/425
266/533 MHz
32 MB Flash
128MB SDRAM
RS-232
Power
Power
circuit
RS-232/422/485
Ethernet
LAN2 LAN1
D/I x 8 D/O x 8
USB
Host
USB
Controller
Pin Assignment
18
PIN RS-232 RS-422/RS-485-4w RS-485
1 DSR --- ---
2 RTS TxD+ ---
3 GND GND GND
4 TxD TxD- ---
5 RxD RxD+ Data+
6 DCD RxD- Data-
7 CTS --- ---
8 DTR --- ---
8-pin RJ45
H/W Block Diagram
Available Models
UC-7408-LX: RISC-based IXP422 embedded computer with 8 serial ports, 8 DI
channels, 8 DO channels, dual LANs, PCMCIA, CompactFlash, Linux 2.4, -10 to 60°C
operating temperature
UC-7408-LX Plus: RISC-based IXP425 embedded computer with 8 serial ports, 8 DI
channels, 8 DO channels, dual LANs, PCMCIA, CompactFlash, USB, Linux 2.6, -10 to
60°C operating temperature
UC-7408-CE: RISC-based IXP422 embedded computer with 8 serial ports, 8 DI
channels, 8 DO channels, dual LANs, PCMCIA, CompactFlash, WinCE 5.0, -10 to 60°C
operating temperature
UC-7408-T-LX: RISC-based IXP422 embedded computer with 8 serial ports, 8 DI
channels, 8 DO channels, dual LANs, PCMCIA, CompactFlash, Linux 2.4, -40 to 75°C
operating temperature
UC-7408-T-LX Plus: RISC-based IXP425 embedded computer with 8 serial ports, 8 DI
channels, 8 DO channels, dual LANs, PCMCIA, CompactFlash, USB, Linux 2.6, -40 to
75°C operating temperature
UC-7408-T-CE: RISC-based IXP422 embedded computer with 8 serial ports, 8 DI
channels, 8 DO channels, dual LANs, PCMCIA, CompactFlash, WinCE 5.0, -40 to 75°C
operating temperature
Linux
Kernel Version: 2.4.18 or 2.6.10 (Plus version)
Protocol Stack: TCP, UDP, IPv4, SNMP V1, ICMP, IGMP, ARP,
HTTP, CHAP, PAP, SSH 1.0/2.0, SSL, DHCP, NTP, NFS, SMTP,
Telnet, FTP, PPP, PPPoE
File System: JFFS2 (on-board flash)
System Utilities: bash, busybox, tinylogin, telnet, ftp, scp
telnetd: Telnet Server daemon
ftpd: FTP server daemon
sshd: Secure shell server
Apache: Web server daemon, supporting PHP and XML
openvpn: Virtual private network service manager
iptables: Firewall service manager
pppd: dial in/out over serial port daemon & PPPoE
snmpd: snmpd agent daemon
inetd: TCP server manager program
Application Development Software:
• Moxa Linux API Library for device control
• Linux Tool Chain: Gcc, Glibc, GDB
Windows Embedded CE 5.0
System Utilities: Windows command shell, telnet, ftp,
web-based administration manager
File System: FAT (on-board flash)
Protocol Stack: TCP, UDP, IPv4, SNMP V2, ICMP, IGMP, ARP,
HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP
Telnet Server: Allows remote administration through a standard
telnet client.
FTP Server: Used for transferring files to and from remote computer
systems over a network.
Web Server (httpd): WinCE IIS, including ASP, ISAPI Secure Socket
Layer support, SSL 2, SSL 3, and Transport Layer Security (TLS/SSL
3.1) public key-based protocols, and Web Administration ISAPI
Extensions.
Dial-up Networking Service: RAS client API and PPP, supporting
Extensible Authentication Protocol (EAP) and RAS scripting.
Application Development Environment:
• Moxa WinCE 5.0 SDK
• C Libraries and Run-times
• Component Services (COM and DCOM)
• Microsoft Foundation Classes (MFC)
• Microsoft® .NET Compact Framework 2.0 SP2
• XML, including DOM, XQL, XPATH, XSLT, SAX2
• SOAP Toolkit
• Winsock 2.2