Moxa Technologies ioLogik E2200 Series User manual

P/N: 1802022000010
*1802022000010*
ioLogik E2200 Series
Quick Installation Guide
Smart Ethernet Remote I/O
Edition 1.0, January 2019
Technical Support Contact Information
www.moxa.com/support
Moxa Americas:
Toll
-free: 1-888-669-2872
Tel:
1-714-528-6777
Fax:
1-714-528-6778
Moxa China (Shanghai office):
Toll
-free: 800-820-5036
Tel:
[phone]
Fax:
[phone]
Moxa Europe:
Tel:
[phone]
Fax:
[phone]
Moxa Asia-Pacific:
Tel:
[phone]
Fax:
[phone]
Moxa India:
Tel:
[phone]
Fax:
[phone]

2019 Moxa Inc. All rights reserved.

- 2 -
Package Checklist
•1 ioLogik E2200 series remote I/O product
•Quick installation guide (printed)
•LDP1602 LCD Module (Optional)
Specifications
Ethernet Interface
10/100BaseT(X) Ports
(RJ45 connector)
1
Magnetic Isolation
Protection
1.5 kV (built-in)
Ethernet Software Features
Configuration Options
Web Console (HTTP), Windows Utility
Industrial Protocols
CGI commands, Modbus TCP Server (Slave),
Moxa AOPC (Active Tag), MXIO Library,
SNMPv1 Trap, SNMPv1/v2c/v3
Management
ioAdmin, BootP, IPv4, SMTP, DHCP Client,
HTTP, Web Console, TCP/IP
MIB
Device Settings MIB
Time Management
SNTP
Serial Interface
Baudrate
1200 bps to 115,200 kbps
Connector
Terminal block
No. of Ports
1
Parity
None
Serial Standards
RS-485
Stop Bits
8
Serial Signals
RS-485-2w
Data+, Data-, GND
Power Parameters
Input Voltage
12 to 36 VDC
No. of Power Inputs
1
Power Connector
1 removable 6-contact terminal block
Power Consumption ioLogik E2210 Series: 202 mA @ 24 VDC
ioLogik E2212 Series: 136 mA @ 24 VDC
ioLogik E2214 Series: 170 mA @ 24 VDC
ioLogik E2240 Series: 198 mA @ 24 VDC
ioLogik E2242 Series: 178 mA @ 24 VDC
ioLogik E2260 Series: 95 mA @ 24 VDC
ioLogik E2262 Series: 160 mA @ 24 VDC
Physical Characteristics
Dimensions
115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight
250 g (0.55 lb)
Installation
DIN-rail mounting, wall mounting
Wiring
I/O cable, 16 to 26 AWG
Power cable, 16 to 26 AWG

- 3 -
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to
167°F)
Storage Temperature
(package included)
-40 to 85°C (-40 to 185°F)
Ambient Relative
Humidity
5 to 95% (non-condensing)
Altitude
2000 m (Please contact Moxa if you require
products guaranteed to function properly at
higher altitudes.)
LED Indicators
LED
Light
Description
PWR
Off
System power off
Red
System power on
RDY
Off
System not ready
Green
System ready
Red
System error
Green, blinking
Click & Go running
Green/Red, blinking
System in Safe mode
Serial
Off
Serial port not connected
Red
Serial port connected
Blinking
Data sending and receiving
Ethernet
Off
Ethernet port not connected
Amber
10 Mbps connected
Green
100 Mbps connected
Blinking
Data sending and receiving
DI
Off
DI status off
Green
DI status on
DO
Off
DO status off
Red
DO status on
DIO
Off
DI or DO status off
Green
DI mode and status on
Amber
DO mode and status on
AI Off
AI channel disabled
Transmitter not connected when in 4
to 20 mA mode
Green
AI channel enabled
RTD
Green
RTD status on
Red
RTD transmitter not connected
TC
Green
TC status on
Red
TC transmitter not connected
DO Power
Off
External power off or not connected
Red
External power on

- 4 -
I/O Wiring Diagrams
Contact Type
Power Source Requirement
Dry Contact A
dry Contact
does not need to be connected to a
power source to function properly.*
Wet Contact
A wet Contact must be connected to a power source
to function properly.
*Some users connect dry contacts to a power source for added stability.
Depending on your application, you can decide whether or not to connect
your dry contacts to power sources.

- 5 -
Mounting
There are two ways to mount the ioLogik E2200 Series: DIN rail or wall
mounting.
•Mounting on a DIN rail
Pull out the bottom slider; latch the unit onto the DIN rail, and then
push the slider back in.
•Mounting on a wall
Pull out both the top and bottom sliders and align the
screws accordingly. The heads of the screws should
be less than 6.0 mm in diameter, and the shafts
should be less than 3.5 mm in diameter, as shown in
the figure.
Connecting to the ioLogik E2200
You have two ways to connect to the ioLogik E2200: by ioAdmin or by web
console.
•Default IP Address: 192.168.127.254
•Subnet Mask: 255.255.255.0
NOTE
Be sure to configure the host PC’s IP address to the same subnet
as the ioLogik E2200. For example, 192.168.127.253
Restore Factory Defaults
There are three ways to restore the ioLogik to factory default settings.
1. Hold the RESET button for 5 seconds.
2. Right-click on the specific ioLogik in the ioAdmin utility and select
Reset to Default.
3. Select Load Factory Default from the web console.
NOTE
Refer to the user's manual for detailed configuration and settings
information.

- 6 -
How to Download the Software
Step 1: Click on the following link to open the Support & Downloads
search tool:
http://www.moxa.com/support/support_home.aspx?isSearchShow=1
Step 2: Type the model name in the search box or select a product from
the drop down box and then click Search.
Step 3: Click the Software Packages link to download the latest
software for the product.