Moxa Technologies VPort 354 User manual

Moxa VPort 354 Industrial Video Encoder
User’s Manual
Third Edition, November 2011
www.moxa.com/product
© 2011 Moxa Inc. All rights reserved.

Moxa VPort 354 Industrial Video Encoder
User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance with
the terms of that agreement.
Copyright Notice
© 2011 Moxa Inc. All rights reserved.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of
Moxa.
Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for
its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas
Toll
-free: 1-888-669-2872
Tel:
[phone]
Fax:
[phone]
Moxa China (Shanghai office)
Toll
-free: 800-820-5036
Tel:
[phone]
Fax:
[phone]
Moxa Europe
Tel:
[phone]
Fax: [phone]
Moxa Asia
-Pacific
Tel:
[phone]
Fax: [phone]

Before getting started
Before using your VPort 354, please pay close attention to the following instructions:
After opening the VPort 354 box, compare the contents of the box with the Package Checklist in Chapter 1. Notify
your sales representative if any of the items are missing or damaged.
To prevent damage or problems caused by improper use, read the Quick Installation Guide (the printed handbook
included in the package) before assembling and operating the device and peripherals. You may also refer to Chapter
1, under Product Description, and all of Chapter 2, of this manual.
The VPort 354 Video encoder has been designed for various environments and can be used to build various
applications for general security or demonstration purposes. For standard applications, refer Chapter 2, Getting
Started, and Chapter 3, Accessing the VPort 354’s Web-based Manager.
Important Note
Surveillance devices may be prohibited by law in your country. Since VPort is both a high performance surveillance
system and networked video server, verify that the operations of such devices are legal in your locality before
installing this unit for surveillance purposes.

Table of Contents
1. Introduction...................................................................................................................................... 1-1
Overview...........................................................................................................................................1-2
Package Checklist...............................................................................................................................1-3
Product Features ................................................................................................................................1-4
Typical Application..............................................................................................................................1-5
Panel Layout of the VPort 354 ..............................................................................................................1-6
Product Description.............................................................................................................................1-7
2. Getting Started.................................................................................................................................. 2-1
Before Getting Started ........................................................................................................................2-2
First-Time Installation and Configuration ...............................................................................................2-2
RS-232 Console Configuration (115200, None, 8, 1, VT1 00)............................................................2-8
Mounting the VPort 354 Dimension .....................................................................................................2-11
DIN-Rail Mounting.....................................................................................................................2-11
Wall Mounting...........................................................................................................................2-12
Wiring Requirements.........................................................................................................................2-13
Grounding the VPort 354............................................................................................................2-13
Wiring the Redundant Power Inputs.............................................................................................2-13
Wiring the Relay Output.............................................................................................................2-14
Wiring the Digital Inputs ............................................................................................................2-14
RS-232 Connection....................................................................................................................2-15
10/100BaseT(X) Ethernet Port Connection....................................................................................2-15
100BaseFX Ethernet Port Connection ...........................................................................................2-16
COM Port..................................................................................................................................2-17
PTZ Port...................................................................................................................................2-17
SD Card Slot....................................................................................................................................2-17
3. Accessing the VPort 354’s Web-based Manager................................................................................ 3-1
Functions Featured on the VPort’s Web Homepage..................................................................................3-2
VPort’s Information .....................................................................................................................3-2
Server Name ..............................................................................................................................3-2
Camera Image View ....................................................................................................................3-2
Audio Control..............................................................................................................................3-3
Client Settings ............................................................................................................................3-3
System Configuration ..................................................................................................................3-4
Video Information .......................................................................................................................3-4
PTZ Control Panel........................................................................................................................3-4
PTZ (Motorized) Camera Control ...................................................................................................3-5
Custom PTZ Camera Commands ...................................................................................................3-5
Video Image Snapshots................................................................................................................3-5
Relay Control..............................................................................................................................3-5
4. System Configuration........................................................................................................................ 4-1
System Configuration by Web Console ..................................................................................................4-2
System ......................................................................................................................................4-3
General Settings..................................................................................................................4-3
Account Privileges................................................................................................................4-4
Local Storage ......................................................................................................................4-5
System Diagnosis ................................................................................................................4-6
System Log History..............................................................................................................4-6
System Parameters..............................................................................................................4-7
Firmware Upgrade................................................................................................................4-7
Reset to Factory Default .......................................................................................................4-8
Reboot ...............................................................................................................................4-8
Network.....................................................................................................................................4-8
General Network Settings .....................................................................................................4-8
SMTP Server and Email Account Settings ..............................................................................4-11
FTP Server Settings............................................................................................................4-12
Dynamic DNS....................................................................................................................4-13
Universal PnP ....................................................................................................................4-13
Multicast........................................................................................................................... 4-14
Configuring Multicast Settings .............................................................................................4-15
Accessible IP List ...............................................................................................................4-16
SNMP ...............................................................................................................................4-16
Configuring SNMP Settings..................................................................................................4-17
SNMP Read/ Write Settings .................................................................................................4-17
QoS (ToS)......................................................................................................................... 4-19
HTTP Event Server.............................................................................................................4-19
Modbus/ TCP.....................................................................................................................4-20
Ethernet Port..................................................................................................................... 4-20

Video.......................................................................................................................................4-21
Image Settings..................................................................................................................4-21
Camera Modulation ............................................................................................................4-22
Video Performance............................................................................................................. 4-22
Camera Control .................................................................................................................4-24
Serial Port................................................................................................................................4-25
PTZ port ........................................................................................................................... 4-26
COM port..........................................................................................................................4-28
Parameters .......................................................................................................................4-31
Audio.......................................................................................................................................4-31
Audio Source.....................................................................................................................4-31
Alarm ...................................................................................................................................... 4-32
System Alarm....................................................................................................................4-32
Event Alarm ......................................................................................................................4-33
Basic................................................................................................................................ 4-33
Schedule........................................................................................................................... 4-34
Video Motion Detection.......................................................................................................4-35
Digital Input......................................................................................................................4-38
Video Loss ........................................................................................................................4-40
CGI Event ......................................................................................................................... 4-41
Alarm/Event Alarm/Sequential Snapshot...............................................................................4-41
A. Frequently Asked Questions.............................................................................................................. A-1
B. Settings of Supported PTZ Cameras .................................................................................................. B-1
C. Time Zone Table................................................................................................................................ C-1
D. Technical Specifications....................................................................................................................D-1

1
1. Introduction
The VPort 354 is a rugged networking video encoder designed for use in harsh environments. In addition to
being able to handle basic video feeds, many advanced features are also included to set up surveillance or web
multimedia applications. The VPort 354 is designed to provide stability, robustness, ease-of-use, and flexibility.
The following topics are covered in this chapter:

Overview

Package Checklist

Product Features

Typical Application

Panel Layout of the VPort 354

Product Description

VPort 354 Introduction
1-2
Overview
The VPort 354 is a high performance, 4-channel industrial video encoder that provides up to 4 CIF full frame
rate performance (NTSC: 704 x 480 @ 30 FPS and PAL: 704 x 576 @ 25 FPS) for each channel, and supports
a dual MJPEG/MPEG4 algorithm, making it especially well-suited for use with distributed surveillance systems
in critical industrial applications. Two-way audio is provided for the convenience of real-time communication
between system administrators located at the central site, and engineers in the field.
The VPort 354 inherits the VPort 351’s industrial features, but also supports DIN-Rail mounting, 12/24 VDC and
24 VAC redundant power inputs, -30 to 70°C operating temperature (“T” models only), and IP30 protection for
industrial mission-critical applications. But most importantly, the VPort 354 meets critical hardware
requirements for industrial safety and ruggedness, such as UL508, which is pertinent to TA, UA, and MA
systems.
High Performance MJPEG/MPEG4 compression
Video input can be efficiently compressed into MJPEG/MPEG4 video stream packets in real time. This is done
without sacrificing remote monitoring capability or storage. Five levels of compression quality and four different
image resolutions are provided to provide greater versatility.
2-way audio supported for a complete surveillance solution
The VPort 354 supports both audio input and audio output for voice over IP communication between a field site
and central site. The 2-way audio function not only saves time, but also saves the cost of needing to add
additional communication devices (such as a phone).
Rugged design for industrial environments
The VPort 354 is an industrial video encoder designed for harsh industrial environments. With 12/24 VDC and
24 VAC redundant power inputs, IP30 protection, and DIN-Rail mounting, the VPort 354 meets the critical
requirements of most industrial applications. Most importantly, the VPort 354-T can operate reliably in a -30 to
70°C temperature range, making it the first video encoder of its kind that can be used for extreme temperature,
industrial-grade applications. The VPort 354-T is an optimal solution for outdoor environments. In addition, the
VPort 354 has received important industrial and safety approvals, such as UL508, making the VPort 354 well
suited for transportation, utility, and manufacturing systems.
2 Ethernet ports for cascade networking and port redundancy
The VPort 354 has two built-in 10/100 Mbps Ethernet ports for cascading multiple VPort 354 units. With the
cascade feature, you’ll need fewer switch ports, and the complexity of your cable layout is reduced. An Ethernet
bypass function is also supported so the cascade network will keep working even if one of the VPort 354 units
in the cascade chain goes offline. Port redundancy can be used to build a backup path for video transmission in
case the primary path is unavailable.
SD Card for recording video locally when the network is dow
The VPort 354 is equipped with an SD card socket (SDHC, V2.0) for local storage purposes, which currently can
support SD cards up to 32 GB. Enable local storage to record events that occur when the network is down and
the video stream cannot be transmitted.
Modbus/TCP supported for convenient communication with SCADA/HMI
Most automation applications use SCADA/HMI systems to monitor and control field site devices and equipment.
Many SCADA/HMI systems now require real-time video for remote monitoring. For this reason, the VPort 354
supports the Modbus/TCP protocol, which enables direct communication between the VPort and the
SCADA/HMI system, allowing administrators to easily determine the status of their VPorts for maintenance
purposes.
Supports serial-to-Ethernet communication for connecting a serial device
In addition to video cameras, surveillance systems also use other devices, such as sensors and card readers.
The VPort 354 provides one serial-to-Ethernet RS-232/422/485 COM port for simple, low-cost installation of
serial devices.

VPort 354 Introduction
1-3
RTSP streaming for easy integration
RTSP (Real-time Streaming Protocol) is a client-server multimedia presentation control protocol, which enables
the interoperability of video devices and software. Hardware or software that supports RTSP streaming can
easily identify and decode the video stream without the hassle of codec installation. For example, users can
view video images from the VPort 354 directly with Quick Time and VLC, both of which support RTSP streaming.
Multicast (IGMP) transmission for network efficiency
Transmitting digital video images via an IP network requires many times the bandwidth required for
transmitting general data. For this reason, the efficiency of network bandwidth management is one of the most
important factors that determine the performance of a video over IP surveillance system. The VPort 354
supports multicast transmission with the IGMP protocol, which can reduce the bandwidth requirements when
multiple clients access the same video stream, and greatly increases the efficiency of network bandwidth
management.
Easy web access using standard browsers
There is no need to install new software to access the video encoder, since the embedded web server allows
users to use any popular web browser to access the video encoder from anywhere over the Internet. As long
as you are connected to the network, you will be able to view the same images seen by your cameras.
Built-in 3 area-selectable Video Motion Detection (VMD)
External sensors are not required, since the video channel can be configured to detect motion in 3 areas,
making it easy to set up a security system either in your office or in the field. And the customizable settings
allow you to tune the system for both object size and sensitivity, making the video encoder adaptable to
different environments.
Weekly schedule for automated surveillance
The user-defined time period will check security settings on a weekly basis, and send notifications or drive
external devices, making the VPort 354 suitable for more versatile applications.
Flexible I/O control for external devices
4 opto-isolated sensor inputs and 2 relay outputs are provided to control external devices, giving system
integrators the option of turning an analog system into an advanced security system.
SDK support for developers
The high-performance video encoder can be affordably integrated into many applicationsand the complete
programming interface of the Moxa VPort SDK PLUS makes the developer’s job easy and straightforward. To
ask about SDK requirements, please contact a Moxa sales representative for details and an application form.
Package Checklist
The Moxa VPort 354 is shipped with the following items. If any of these items are missing or damaged, please
contact your sales representative for assistance.
•VPort 354
•10-pin terminal block for 1 power input and 4 digital inputs
•8-pin terminal block for the other power input and 2 relay outputs
•5-pin terminal block for RS-232/422/485 PTZ control port
•Quick Installation Guide
•Document & Software CD (includes User’s Manual, Quick Installation Guide, Moxa IVN Solution Datasheet,
and Utilities)
•Warranty statement
NOTE: Notify your sales representative if any of the above items are missing or damaged.

VPort 354 Introduction
1-4
Product Features
High Performance Video/Audio Networking Solution
•Works with NTSC/PAL analog video cameras
•Supports MPEG4/MJPEG video compression technologies
•4 BNC video inputs
•Video stream up to 120 frames/sec in 4CIF (704 x 480) resolution through a total of 4 channels
•Select from 4CIF, 2CIF, CIF, and QCIF resolutions.
•1 audio input and 1 audio output for 2-way voice communication
•TCP, UDP, and HTTP network transmission modes
•Supports Modbus/TCP for easy communication with SCADA systems
•Standard RTSP (Real-time streaming protocol) for easy integration
•Supports multicast (IGMP) protocols for efficient network transmission;
•DDNS, UPnP and IP filtering supported
•Supports QoS (TOS) for priority transmission
•Supports SNMP V1/V2c/V3 for network management
•Built-in web server and RS-232 console for remote access and configuration
•Supports one SD card slot (SDHC inteface) for recording video on the SD card if the network is down.
•Two auto-sensing 10/100BaseT(X) Ethernet ports or 100BaseFX (SC connector) ports for cascade
networking or port redundancy.
•Allows a maximum of 8 unicast and 4 multicast output video streams simultaneously.
•Supports CBR (constant bit rate) or VBR (variable bit rate) encoding
•Supports 1 RS-232/422/485 DB9 COM port for controlling a PTZ (PAN/TILT/ZOOM) motorized camera or
serial device via a TCP/IP network
•Supports 1 RS-232/RS-422/RS-485 5-pin PTZ port for controlling a PTZ (PAN/TILT/ZOOM) motorized
camera via a TCP/IP network
Rugged Industrial Design
•Two 12/24 VDC and 24 VAC redundant power inputs with LED indicators
•-30 to 70°C operating temperature for critical industrial environments (“-T”models)
•35 mm DIN-Rail mounting or panel mounting installation (requires optional accessories)
•IP30 protection form factor
•CE and FCC certifications for industrial applications
Intelligent Alarm Trigger
•Built-in Video Motion Detection (VMD)
•Equipped with 4 DIs and 2 relays (DO) for external sensors and alarms
•Snapshot images provided for pre, trigger, and post alarm
•Sequential snapshot images supported
•Messages with snapshot images can be sent via FTP or Email
•HTTP Action setting for alarm messages sent by HTTP event server
•Configure alarm activation schedule
Video Management and Control
•Moxa SoftNVR-IA IP Surveillance Software for viewing and recording
•Free Moxa VPORT SDK PLUS supported with flexible interface and sample code for customized applications
or system integration
NOTE
If you are interested in Moxa’s VPORT SDK PLUS, please go to Moxa’s website
www.moxa.com
to download the
package, or contact a Moxa sales representative for more information about this SDK

VPort 354 Introduction
1-5
Typical Application

VPort 354 Introduction
1-6
Panel Layout of the VPort 354
1. Grounding screw
2. RS-232 console port
3. Hardware reset button
4. 8-pin terminal block for Relay 1, Relay 2, and power input 2
(PWR2)
5. 10-pin terminal block for DI 1, DI 2, DI 3, DI 4, power input 1
(PWR1)
6. Heat dissipation vents
7. LEDs for STAT, PWR1, PWR2, FAULT
8. LEDs for V1, V2, V3, V4
9. AUDIO INPUT port for mic-in and line-in connection
10. AUDIO OUTPUT port for external speaker
11. RS-232/422/485 COM port with DB9 male connector for PTZ
camera or serial device control
12. RS-232/422/485 PTZ port with 5-pin terminal block for PTZ
camera control
13. 4 BNC connectors for video input
14. RJ45 10/100BaseTX Ethernet ports
with 10 Mbps, 100 Mbps LEDs
15. 100BaseFX fiber optic ports with 100 Mbps LED
16. SD card slot with LED
17. Model name
18. Screw hole for wall mounting kit
19. DIN-Rail mounting kit

VPort 354 Introduction
1-7
Product Description
BNC video input
The BNC video input is a 1Vpp, 75-ohm video port for connecting an external camera. To ensure that the
correct video modulation type is detected, the cameras should be connected and powered on before the VPort
is powered on.
NOTE
Please use a standard CCTV cable (RG59U or above) to connect the video camera to the VPort’s BNC connector.
RCA phone jacks for audio input/output
The VPort 354 has 2 RCA phone jacks for audio input and output on the front panel. One jack is for a
MIC-in/Line-in audio input connection, which can be directly connected with a microphone or an audio source
from an amplifier. The other jack is a Line-out audio output connection, which can be used to connect
earphones or an amplifier.
LED indicators
The front panel of the VPort 354 contains several LED indicators. The function of each LED is described in the
table below.
LED Color State Description
STAT
RED ON Hardware initialization
FLASHING Software initialization
GREEN ON System boot-up
FLASHING Firmware upgrade in process
PWR1 AMBER On Power is being supplied to power input PWR1
Off Power is not being supplied to power input PWR1
PWR2 AMBER On Power is being supplied to power input PWR2
Off Power is not being supplied to power input PWR2
FAULT RED
On
Three conditions could cause this LED to light up:
1. One of the 2 power inputs is disconnected.
2. Video loss
3. Network disconnected
Settings can be modified on the System Configuration

Alarm

System Alarm page.
Off Both power inputs are connected and working, or there is no video loss, or the network disconnected alarm is silent (if it is
activated).
V1 V2 V3 V4 GREEN On Video signal has been detected
Off Video signal has not been detected
2 10/100 Mbps Ethernet ports or 2 100 Mbps fiber optic Ethernet ports
The VPort 354 series of video encoders come in three models: the VPort 354 has 2 RJ45 10/100M Ethernet
ports (LEDs on the left corners of the ports indicate 10M or 100M), the VPort 354-SS-SC has 2 single mode fiber
optic Ethernet ports, and the VPort 354-MM-SC has 2 multi mode fiber optic Ethernet ports. Choose the model
that is most appropriate for your own application.

VPort 354 Introduction
1-8
RS-232/RS-422/RS-485 PTZ port
The VPort 354 has 1 PTZ port for PTZ control. This PTZ port is an RS-232/RS-422/485 serial port with a 5 pin
terminal block connector. The pin assignments are as follows:
PIN
RS-422/485
RS-232
1
GND
Ground
GND
Ground
2
R-
Rx-
---
N/A
3
R+
Rx+
RxD
RxD
4
T-/D-
Tx-/ Data-
---
N/A
5 T+/D+ Tx+/ Data+ TxD TxD
To enable PTZ control, users should configure the PTZ control protocol in the web console.
NOTE
The PTZ control protocol is not standardized. To use a particular PTZ control protocol, the video encoder must
support the driver for that protocol. Currently, the VPort 351 supports PTZ control protocol drivers for:
1. Pelco D
2. Pelco P
3. Dynacolor
DynaDome
4
. Cohu
In addition, there is a “Transparent PTZ Control” option in the camera driver list, which is used to transmit the
PTZ control signal through the TCP/IP network to the VPort
D351 video decoder or PC (additional Real COM
driver required), and the PTZ control panel or keyboard can directly control the PTZ camera or device. There is
no need for a PTZ camera driver when using this setting.
To use a protocol that is not on the list, you will need to contact the manufacturer of the camera to get the PTZ
control commands, and then use the VPort 354’s custom camera function to program the PTZ control.
NOTE
The VPort 354 comes with a PTZ driver upload function for implementing new P
TZ drivers. Please contact a
Moxa sales representative if you need assistance from Moxa’s R&D department to create a new PTZ driver.
RS-232/RS-422/RS-485 COM port
The VPort 354 has 1 COM port for connecting a PTZ motorized camera or serial device. The COM port transmits
RS-232 or RS-422/485 signals over the TCP/IP network. Users can use this COM port (DB9 male connector) to
monitor data, control a serial device, or command a PTZ motorized camera. The pin assignments are as
follows:

VPort 354 Introduction
1-9
PIN RS-232 RS-422
4-wire RS-485
2-wire
RS-485
1 DCD TxD-(A) ---
2 RXD TxD+(B) ---
3 TXD RxD+(B) Data+(B)
4 DTR RxD-(A) Data-(A)
5 GND GND GND
6 DSR --- ---
7 RTS --- ---
8 CTS --- ---
9
---
---
---
SD card slot for local storage capability
The front panel of Moxa’s VPort 354 has an SD card slot that supports the SDHC interface. An SD card can be
used for recording video if the network is down. Currently, the maximum SD capacity is 32GB, which is
supported by the VPort 354. To plug in a SD card follow these simple steps.
STEP 1:
Open the upper case of the SD card slot
.
STEP 2:
Plug the SD card into the slot. The
SD LED indicator will flash red.
STEP 3:
When the SD card is mounted
successfully, the SD LED indicator will
turn green after 2 to 3 seconds.
If the
SD card mount fails, then the SD LED indicator will continuously flash red. If this happens,
repeat the above until the
SD LED indicator light turns green.
STEP 4:
Close the upper case and then go to the
web-based manager to set up local storage functions.
NOTE
The video being recorded in the SD card can be downloaded via FTP. Before playing the recorded video via a
media player, the user needs to use Moxa Ethernet Switch and Video Server Configurator (edscfgui.exe) to
transform the PES video format to AVI.
NOTE
Sandisk Extreme III SD cards are recommended due to the read/write speed requirement
Redundant 12/24 VDC and 24 VAC power inputs
The VPort 354 has two power inputs to provide redundancy. Each power input supports both 12/24 VDC and 24
VAC power for greater versatility.
NOTE
The supported power input specifications for the VPort 354 series are 12
-
32 VDC for a 12/24 VDC power input,
or 18
-30 VAC for a 24 VAC power input. This differs from the Moxa EDS switch’s 12-45 VDC power input.

VPort 354 Introduction
1-10
General I/O Terminal Blocks
An 8-pin terminal block and a 10-pin terminal block are located on the VPort 354’s top panel. The terminal
blocks provide 4 digital inputs (DI), 2 relay outputs (Relay), and 2 power inputs. The digital inputs and relay
outputs are for linking to peripheral devices, such as sensors and alarms. These I/O connections can be
employed when using the VPort 354 to create an intelligent alarm system for system operations (power failure,
video loss, disconnected network) or triggered events (VMD).
Relay Output
Normal Open
Max. 1A, 24 VDC
Initial status is Normal Open
Common
Normal Close
Digital Input DI- “High”: +13V to +30V
“Low”: -30V to +3V
I1, I2 DI+
NOTE
Please refer to the VPort 354’s Quick Installation Guide to learn how to wire the digital inputs and relay outputs.
RS-232 Console Port
The VPort 354 has one RS-232 (10-pin RJ45) console port located on the top panel. Use either an RJ45-to-DB9
cable or RJ45-to-DB25 cable to connect the VPort 354’s console port to your PC’s COM port. You may then use
a console terminal program, such as Moxa PComm Terminal Emulator, to access the VPort 354’s console
configuration utility.
Reset Button
A recessed RESET button is provided for rebooting and restoring the system to the factory default settings. Use
a pointed object, such as a straightened paper clip or toothpick, to press the reset button.
1. Reboot:
To reboot the VPort 354, power it off and then power it back on again, or push the RESET button one time.
The STAT LED will light in red as the POST (Power On Self Test) process runs. When the rebooting process
is finished, the STAT LED will turn green.
2. Restore to Factory Settings:
A recessed RESET button is provided for restoring the system to the factory default settings. When the
system fails to install properly or malfunctions, use the RESET button located on the top panel of the VPort
354 to restore the factory defaults.
To do this, use a pointed object such as a straightened paper clip or toothpick to hold down the reset button,
and then release the reset button when the STAT LED stops flashing in red. At this point, the POST process will
run, and the VPort will reboot. The STAT LED will turn green when the VPort has finished rebooting.

2
2. Getting Started
This chapter includes information about how to install a VPort 354 video encoder.
The following topics are covered in this chapter:

Before Getting Started

First-Time Installation and Configuration
RS-232 Console Configuration (115200, None, 8, 1, VT1 00)

Mounting the VPort 354 Dimension
DIN-Rail Mounting
Wall Mounting

Wiring Requirements
Grounding the VPort 354
Wiring the Redundant Power Inputs
Wiring the Relay Output
Wiring the Digital Inputs
RS-232 Connection
10/100BaseT(X) Ethernet Port Connection
100BaseFX Ethernet Port Connection
COM Port
PTZ Port

VPort 354 Getting Started
2-2
Before Getting Started
In what follows, “user” refers to those who can access the video encoder, and “administrator” refers to the
person who knows the root password that allows changes to the Video Encoder’s configuration, in addition to
providing general access. Administrators should read this part of the manual carefully, especially during
installation.
ATTENTION
The VPort 354 series are high
-performance video encoders designed to perform without a cooling fan.
Therefore, it is recommended that each VPort 354 be installed with at least a 5mm clearance on all surfaces to
conduce heat
-dissipation.
First-Time Installation and Configuration
Before installing the VPort 354, check to make sure that all the items on the package checklist are in the box.
In addition, you will need access to a notebook computer or PC equipped with an Ethernet port.
Step 1: Select the power source
The VPort 354 can be powered by a 12 to 32 VDC DC power input, or a 18 to 30 VAC AC power input. Two power
inputs are provided for redundancy. Users can check the LED status located in the front panel to see if the
power inputs are connected appropriately. If one of the power inputs fails, the FAULT LED will light up in red if
the power failure alarm is enabled.
NOTE
The VPort 354 series support power input specifications of 12
-32 VDC for 12/24 VDC power input, or 18-
30 VAC
for 24 VAC power input (note that this is different from Moxa EDS switch’s 12
-45 VDC power input).
Step 2: Connect the VPort 354 to a Network
The VPort 354 has 2 auto-sensing 10/100 Mbps RJ45 Ethernet ports, or 2 100 Mbps fiber optic ports (multi
mode or single mode) for network connectivity. Both the RJ45 and fiber optic ports have separate LEDs for 10
Mbps and 100 Mbps connections.
Step 3: Connect the VPort 354 to a camera and an audio source
The VPort 354 has 4 VIDEO INPUT ports (V1, V2, V3, V4). Use the BNC connector (1.0 Vpp, 75Ω) and coaxial
cable to connect video cameras to the VPort to input analog video signals.
The VPort 354 has 1 audio input and 1 audio output. A microphone or an amplifier can be plugged directly into
the AUDIO INPUT port, and a speaker can be plugged into the AUDIO OUTPUT port.
NOTE
Four LEDs (V1, V2, V3, and V4) are located on the VPort 354’s front panel to indicate the video signal
transmission status for video inputs. Check the LED status to see if the video is
working properly.
ATTENTION
A ground loop isolator is recommended to be used between the camera and the VPort
354. Possible electrical
surges generated by the ground potential difference of these two devices may damage the VPort’s
chips/boards.

VPort 354 Getting Started
2-3
Step 4: Connecting motorized PTZ cameras and serial devices
The VPort 354 has 2 RS-232/422/485 ports. One is a COM PORT with a DB9 male connector, and the other is
a PTZ PORT with a 5-pin terminal block connector. Both ports can be used for connecting PTZ control cables to
control PTZ cameras over the TCP/IP network.
In addition, the COM PORT with the DB9 male connector can also be used to connect general serial devices,
such as card readers, for transmitting serial data over a TCP/IP network. This port can be used to connect serial
devices to the VPort 354 (however, the port cannot be used to connect video cameras).
To enable PTZ control, users should configure the PTZ control protocol in the web-based manager.
[D1]
NOTE
The PTZ control protocol is not standardized. To use a particular PTZ control protocol, the video server must
support the driver for that protocol. Currently, the VPort 354 supports PTZ control protocol drivers for:
1. Pelco D
2. Pelco P
3. DynaColor DynaDome
4. Cohu
If you need to use a protocol that is not on the list, contact the manufacturer of the camera to get the PTZ
control commands, and then program its PTZ control using the VPort 354’s
Custom Camera function.
NOTE
The VPort
354 comes with a PTZ driver upload function for implementing new PTZ drivers. Please contact a
Moxa sales representative if you need assistance from Moxa’s R&D department to create a new PTZ driver.
NOTE
The “Transparent PTZ Control” function in the camera driver list is used to transmit the PTZ control signal over
a TCP/IP network to the VPort D351 video decoder or PC (additional driver required). The PTZ control panel or
keyboard can directly control the
PTZ camera or device, eliminating the need for a PTZ camera driver and
allowing the use of PTZ cameras with the VPort encoder.

VPort 354 Getting Started
2-4
Step 5: Configure the VPort 354’s IP address
After powering on the VPort 354, wait a few seconds for the POST (Power On Self Test) to run. The STAT LED
turns green to indicate that the POST process has completed. The IP address will be assigned when the 10 or
100 Mbps NETWORK LED blinks. The IP address assigned after the POST is completed depends on the network
environment.
Network Environment with a DHCP Server
In this case, the IP address of the VPort 354 is assigned by a DHCP Server. Use the DHCP Server’s IP address
table, or use the Moxa VPort utility to determine the IP address that was assigned by the DHCP Server.
NOTE
After
powering on the VPort 354, wait a few seconds for the POST (Power On Self Test) to run. The IP address
will be assigned when the 10 or 100 Mbps NETWORK LED blinks.
Using the Moxa Ethernet Switch And Video Server Configuration Utility (edscfgui.exe), as described
below:
1. Run the edscfgui.exe program to search for the VPort and EDS switches. After the Utility window opens,
you may also select or click on Broadcast Search, which is located under the List Server menu, to initiate a
search (note that you can also click on the Broadcast Search icon to initiate a search.
NOTE
You may download the Moxa Ethernet Switch And Video Server Configuration Utility (edscfgui.exe)
software from Moxa’s website at
www.moxa.com.
2. The Broadcast Search window will show a list of all switches and VPorts located on the network. The
progress of the search will also be displayed.

VPort 354 Getting Started
2-5
3. When the search has ended, the Model Name, MAC address, and IP address of the EDS Switch and the VPort
will be listed in the Utility window.
NOTE
Broadcast Search
can only be used to search for devices on the same LAN domain. If your devices are located
on a different LAN domain, use
Specify IP Address to search for the device by inputting the IP address.
4. Double-click the selected VPort, or use Internet Explorer to access the VPort’s web-based manager (web
console).
Network Environment without a DHCP Server:
If your VPort 354 is connected to a network that does not have a DHCP server, then you will need to configure
the IP address manually. The default IP address of the VPort 354 is 192.168.127.100 and the default subnet