Moxa Technologies MD-119 User manual

MD-119 Hardware Manual
First Edition, February 2013
www.moxa.com/product
© 2013 Moxa Inc. All rights reserved.

MD-119 Hardware Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance with
the terms of that agreement.
Copyright Notice
© 2013 Moxa Inc. All rights reserved.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of
Moxa.
Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for
its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas
Toll
-free: 1-888-669-2872
Tel:
[phone]
Fax:
[phone]
Moxa China (Shanghai office)
Toll
-free: 800-820-5036
Tel:
[phone]
Fax:
[phone]
Moxa Europe
Tel:
[phone]
Fax:
[phone]
Moxa Asia
-Pacific
Tel:
[phone]
Fax:
[phone]

Table of Contents
1. Introduction...................................................................................................................................... 1-1
Overview ...........................................................................................................................................1-2
Package Checklist ............................................................................................................................... 1-2
Product Features ................................................................................................................................ 1-2
MD-119 Hardware Specifications ..........................................................................................................1-3
2. Hardware Introduction...................................................................................................................... 2-1
Appearance and Layout .......................................................................................................................2-2
Dimensions ........................................................................................................................................2-3
LED Indicators....................................................................................................................................2-3
On-screen Display Control Buttons........................................................................................................2-3
3. Hardware Installation and Peripherals.............................................................................................. 3-1
Installing the MD-119.......................................................................................................................... 3-2
Wiring Requirements...........................................................................................................................3-2
Connecting Power Sources ................................................................................................................... 3-3
Grounding the MD-119 ........................................................................................................................ 3-3
Connecting Data Transmission Cables ...................................................................................................3-3
Connecting to a Serial Device .......................................................................................................3-3
Connecting to Computers or Laptops.....................................................................................................3-4
Enabling the Built-in Buzzer .................................................................................................................3-5
A. Regulatory Approval Statement ........................................................................................................ A-1
B. On-screen Display and Display Configuration.................................................................................... B-1
On-screen Display (OSD) Controls ........................................................................................................B-2
Opening the Configuration Screen .................................................................................................B-2
OSD Passwords/Keycode .....................................................................................................................B-2
OSD Filetree Legend ...........................................................................................................................B-3
OSD Menu Map...................................................................................................................................B-3
Main Group 1 ..............................................................................................................................B-4
Main Group 2 ..............................................................................................................................B-5
Main Group 3 ..............................................................................................................................B-6
OSD Menu Items Explained..................................................................................................................B-7
Basic Image Properties ................................................................................................................B-7
Picture: PIP Adjustments..............................................................................................................B-8
Picture: Advanced Settings ...........................................................................................................B-9
Swap Input Sources: Main to Second / Second to Main ..................................................................B-11
Image Information .................................................................................................................... B-12
Auto-Setup ............................................................................................................................... B-12
Display Setup: OSD ................................................................................................................... B-12
Display Setup: User Settings ...................................................................................................... B-14
Display Setup: Preset Defaults .................................................................................................... B-15
Display Setup: Service Menu ...................................................................................................... B-16
Display: Input Sources / Dual Image Displays...............................................................................B-16
Power Off ................................................................................................................................. B-18
C. Display UART Command .................................................................................................................... C-1
Connecting to the Display ....................................................................................................................C-2
UART Software Configuration ...............................................................................................................C-2
Date Rate...................................................................................................................................C-2
Data Format ...............................................................................................................................C-2
UART Command Format ......................................................................................................................C-2
Command Format Description .......................................................................................................C-2
Downloading Files ...............................................................................................................................C-4
Downloading Files .......................................................................................................................C-4
Downloading Dual RGB File...........................................................................................................C-5
Uploading/Downloading Configuration Files.....................................................................................C-5
OSD Control Command........................................................................................................................C-6
BLI (Brightness Control)...............................................................................................................C-6
DST (Display State) .....................................................................................................................C-6
MAN (Manufacturer ID Code) ........................................................................................................C-6
POT (Potentiometer Control).........................................................................................................C-7
SNB (Serial Number Query) ..........................................................................................................C-7
TYP (Type/Model/Number Query) ..................................................................................................C-7
SWI (Software Version Query) ......................................................................................................C-8
VER (Version Number) .................................................................................................................C-8
MCC (OSD Control)......................................................................................................................C-8
MCC Control Command........................................................................................................................C-9

1
1. Introduction
The MD-119 Series displays are designed to meet exacting performance and durability standards. The19-inch
panels featuring a 4:3 aspect ratio, 1280 x 1024 pixel resolution, full range dimming, and optional optical
bonding make these displays ideal for a variety of applications. These computer display terminals further meet
required industrial standards and are perfectly suited for a wide variety of industrial uses that require rugged,
reliable performance, whether indoors or out.
Further, these displays use either AC or DC power inputs, simplifying the installation of the displays at field
sites, and also offer PIP (Picture-In-Picture) and PBP (Picture-By-Picture) modes, allowing for multiple image
display configurations on a single screen.
The following topics are covered in this chapter:

Overview

Package Checklist

Product Features

MD-119 Hardware Specifications

MD-124 HW Manual Introduction
1-2
Overview
The MD-119 Series has been designed to fit the peculiar environmental demands of industrial systems. The
19-inch panel features a 4:3 aspect ratio and a 1280 x 1024 pixel resolution, making this display ideal for any
industrial application requiring detailed, high-resolution imagery. In addition, with full range dimming, optical
bonding (optional), these computer display terminals satisfy a variety of international standards.
Package Checklist
The MD-119 Series includes the following models:
MD-119: 19-inch industrial display with 4:3 aspect ratio, LED backlighting, multiple input AC/DC power supply,
and tape bonding; optical bonding and capacitance touch screens are available as optional requests
Each model ships with the following items:
MD-119 display
DVI to VGA adapter
VGA Cable
DVI-D Cable
Console Mounting Kits
DC terminal block (for powering device)
DC terminal block (for powering the buzzer)
Documentation and driver DVD
Quick installation guide (printed)
Warranty card
NOTE
Please notify your sales representative if any of the above items are missing or da
maged.
Product Features
The MD-119 display has the following features:
•19-inch wide viewable image size with 4:3 aspect ratio and 1280 x 1024 pixel resolution
•LED backlighting
•Optical bonding (optional)
•Surface capacitance touch panel (optional)
•Picture-in-picture / picture-by-picture (PIP/PBP)
•Multi-power input (24 VDC, 110 to 230 VAC)
•IP54 rated front panel

MD-124 HW Manual Introduction
1-3
MD-119 Hardware Specifications
Display
Panel Size:
19’’ wide viewable image size
Panel Type:
TN
Aspect Ratio:
4:3
Pixels: 1280 x 1024 (SXGA)
Pixel Pitch (RGB):
0.282 (H) x 0.282 (V) mm
Response Time:
5 ms (typical)
Contrast Ratio:
1000:1(typical)
Light Intensity:
350 cd/m2
Viewing Angles:
85° x 80°(Right-Left x Up-Down)
Active Display Area:
376.32 (H) x 301.06 (V) mm/14.81(H) x 11.85 (V) (inch)
Max Colors:
16.7M (8 bits/color)
Display Interface:
VGA output x 1, DVI-I input x 2, BNC composite x 3
Serial Interface
Console Port
:2 RS-232/422/485 ports, (1 is manufacture reserved), (DB9 male)
Serial Communication
Parameters
Data Bits:
5, 6, 7, 8
Stop Bits:
1, 1.5, 2
Parity:
None, Even, Odd, Space, Mark
Baudrate:
9600 bps
Serial Signals
RS
-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS
-422: TxD+, TxD-, RxD+, RxD-, GND
RS
-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS
-485-2w: Data+, Data-, GND
Front Panel
OSD:
5 x OSD control
Physical Characteristics
Housing:
Aluminum sheet metal
Weight:
9.69 kg
Dimensions:
82 x 483 x 444 mm (3.29 x 19.02 x 17.48 in)
Mounting:
Console mounting
Environmental Limits
Operating Temperature:
-15 to 55°C (5 to 131°F)
Storage Temperature:
-20 to 60°C (-4 to 140°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
Anti
-Vibration:
• IEC 60945
• DNV 2.4, Class A/Class C
Power Requirements
Input Voltage:
• 24 VDC
(with tolerance from 18 to 36 VDC), 2-pin screw-type terminal block
•
110 to 230 VAC, 50/60 Hz
Power Consumption:
42 W
•
75W (standard)
•
90W (full loading)
Standards and Certifications
Safety:
UL/cUL, CCC (Pending)
EMC: EN 55022 Class B, EN 55024-4-2, EN 55024-4-3, EN 55024-4-4, FCC Part 15 Subpart B Class A
Marine:
IEC 60945 4th (Pending), DNV (Pending), IACS-E10 (Pending)
IP Rating:
IP54 (IP66 by request)

MD-124 HW Manual Introduction
1-4
Compass Safe Distance:
<80cm (to be tested by DNV)
Green
Product: RoHS, cRoHS, WEEE
Warranty
Warranty Period:
One year
Details:
See www.moxa.com/warranty
We recommend taking the following precautions to minimize heat build-up within the display:
•Position the display within ±40° of the vertical
•If:
(a) the display is not positioned within ±40° of the vertical, or
(b) the operating temperature exceeds 25°C, or
(c) the display is used in a location with minimal ventilation,
then install an external fan to increase airflow upwards through the chassis
Important Safety Precaution:
Even though the display is rated to operate within the IEC 60945 standard of -15 to 55°C for industrial
applications, it is best to ensure that the operating temperature does not exceed 25°C. Doing so will
significantly increase the lifespan of your display and reduce service costs.

2
2. Hardware Introduction
The MD-119 display is compact, well-designed, and rugged enough for industrial applications. LED indicators
help you monitor performance and identify trouble spots, multiple serial ports allow you to connect different
devices for wireless operation, and the reliable and stable hardware platform lets you devote your attention to
developing your applications.
The following topics are covered in this chapter:

Appearance and Layout

Dimensions

LED Indicators

On-screen Display Control Buttons

MD-124 HW Manual Hardware Introduction
2-2
Appearance and Layout

MD-124 HW Manual Hardware Introduction
2-3
Dimensions
LED Indicators
LED Name LED Color LED Function
Power Green Power is on and functioning normally
Yellow Display is suspended
On-screen Display Control Buttons
The front panel of the MD-119 comes with a power button and four on-screen display (OSD) control buttons for
accessing and adjusting image properties. Please refer to Appendix B for detailed explanations of individual
items on the OSD menu and adjusting image properties.